You are by far one of the most interesting RV repair guys on the interent. Thank You for showing us how that type of work can and should be done. Excellent job.
@AZExpert
3 жыл бұрын
Wow, thanks!
@mikehunt410
2 жыл бұрын
I used this video to replace the floor in my camper's slide this weekend. It went just as you said and I felt it was a very easy job. Took about 5 hours and that was with beer breaks. Thank you for making this. Saved me a considerable amount of money.
@AZExpert
2 жыл бұрын
Hey that's a huge compliment! I'm glad it worked out for you
@Livefreewhileucan
2 жыл бұрын
Just imagine if the whole industry had these kind of people who actually care about doing a good job. I am a 30 yr tradesman, and I appreciate watching you do such fine work, and not cutting corners. You are remarkable Sir. I salute you
@AZExpert
2 жыл бұрын
Thank you for the kind words
@kckettridge
Жыл бұрын
I am 100% with you. I am a retired GC and have owned RV's for the past 20 years and still can't believe how crappy the build quality is on these units. I shake my head at how they use a thin piece of nylon/teflon tape for the slide out to "glide" on instead of installing actual rollers.
@frankysteele357
Жыл бұрын
Couldn’t have said it any better!
@enjoyingretirement4846
3 жыл бұрын
What a good man. Just shows how valuable you are to people in RV trouble. Good to see the son helping and learning. God Bless.
@AZExpert
3 жыл бұрын
I appreciate that
@markstench4470
3 жыл бұрын
Awesome work , your experience makes it look so easy , Those legs to hold it up and imprinting the screw holes on the legs was ingenious. Thanks for educating the masses.
@AZExpert
3 жыл бұрын
thanks!
@dorothyallen3614
3 жыл бұрын
@@AZExpert thank you sir, I have to do that on a 28’ big slide and wall that’s been eaten out by red fire ants and my inside wall is so totally eaten out in the corner, my hand went through it when I pushed on it! I’m 73 and I can’t find any one to do it at my site, and the RV repair wants $4000. And me bring it to them. I live in my RV full time and my slide out Motor for this huge slide out can’t be replaced per the RV repair company so you have to manually use a plumbers pipe wrench to move it in and out! It’s a 1993 or 96 CARRIAGE 5th wheel and I love it because it was made with the Amish quality. I’ve had people in my park say wow, they don’t make them like this quality anymore! If you’re ever in Huntsville, Texas I would love to show you my problem and my home. It’s a shame I can’t get it repaired where I sit in this beautiful Sunny Ridge RV park. Again I really appreciate your showing RVers how these repairs can be done if one is willing to go the extra mile. Stay safe and well in these times, I’m praying we all will be safe and our freedoms returned to humanity soon. God bless you and your family.
@TheMinnow101
3 жыл бұрын
@@dorothyallen3614 Sorry to hear about your issues. However the reality is that these RV's were never designed to last over 20 years, especially for full time use. You might need to look for something newer. Good luck.
@wazup3333
2 жыл бұрын
@@TheMinnow101 they're mobile homes, they should last...
@glennwest4438
Жыл бұрын
@@TheMinnow101 Nothing on the market compares to them
@Joe71Walker
5 ай бұрын
I just want to thank you for this thorough video, I was able to replace the floor on my Cougar 5th wheel that had the same problem. Followed your steps here and certainly made it a much easier project than I had thought initially. Now to reassemble and get back to camping!!!!
@dar7771
3 жыл бұрын
Dang James. Nice job! And mobile. Nobody I know would tackle that job mobile. You made that look so easy. I used to work at a RV repair facility. You sure made that look way easier than what it is. Thanks for sharing. You are a very talented RV tech.
@AZExpert
3 жыл бұрын
thank you very much.
@darrenharms7271
2 жыл бұрын
Thank you for this! We replaced our floor and this video was huge in helping us do that. We used c-clamps to hold the stilts to the slide out rather than screwing them in. Saved a lot of time and didn’t introduce any new or larger holes. Thanks again! Probably will be doing this on the rear slides soon.
@AZExpert
2 жыл бұрын
Thanks for watching!
@wes518171
2 ай бұрын
You are the best rv repairman I have ever seen on utube. It's great the way you show and explain how to do it. Much respect!
@dennisbutler349
3 жыл бұрын
You demonstrate once again the kind of craftsman we all want and and the care every customer should have. No one provides service like this without sacrificing something. You are a good man.
@AZExpert
3 жыл бұрын
thanks!
@dorothyallen3614
3 жыл бұрын
He’s absolutely a good and talented man of truth, honor and integrity, thank you sir.
@dkleath8697
Жыл бұрын
Out of literally hundreds of RV Repair and Maintenance videos; THIS IS #1 ☆☆☆☆☆BEST!!! I'm a Senior widow, just bought a used 2005 KIT Companion 328F 5th Wheel & thus one looks almost identical to mine ( which needs some work & I'm not able to "do it myself"). Great to see this as it's taken apart without having to actually do it ( now I know that slide-out mechanism is the hydraulic type - haven't figured out for sure what the other two are yet.) I just know they're not Schwintek type...Thanks, w/ prayers for blessings < You surely deserve them!
@bruceclaxton5721
Жыл бұрын
Well I finally got around to replacing the same floor on my 2013 Sanibel 5th wheel. What was different? First big difference was that the old floor and new floor had to be removed and replaced from the inside. I got a 4 x 8 sheer of Home Depot 3/4" "Marine" plywood and coated both sides and edges with black "Pond Armor" 2 part epoxy. The 1.5 Qt kit gave me just enough to do 2 full coats everywhere. The other difference was the carpet, which was stapled and glued in place along with the black plastic tarp type material. Way too much work to try and salvage that so I used 18" carpet squares from Home Depot. 1 box of 10 did the whole job. Finally done and it looks great!
@EdwinValentinRev
Жыл бұрын
Thank you for showing us how this jobs should be done. My wife and I have been RV for about 6 months and are always concerned about repairs. I have a similar problem and have a repair guy coming over this week. Hope he is as good as u are. God bless!
@AZExpert
Жыл бұрын
It's always pricey to fix them for sure
@reggievallotton8323
3 жыл бұрын
Excellent work. It’s great you were able to accommodate the owners on a job normally only done at the shop.
@AZExpert
3 жыл бұрын
Thanks 👍
@jmvl007
Жыл бұрын
Just wanted to say thanks. I watch many of your videos, and this step by step really helped us replace our slide out floor very easily. Can’t thank you enough! :)
@AZExpert
Жыл бұрын
I'm happy to hear it helped. Thank you!
@glennjonesnc673
2 жыл бұрын
I’ve been watching your videos for about a month of and on, I have learned a tremendous amount. Your knowledge of RV’s is outstanding. And your videos are to the point. Much appreciate all you do. I have to say, this video, although it was not a glamorous fix keeping people on the edge of their seat. I found it very informative. I really like the way you approach different situations. Some RV tech’s might have said, you have to have a fork lift. Or the box has to come off. You did an outstanding job, and I hope the owners know how lucky they are that you did a solid repair on-site and it appears to be in one day. I’ll keep watching, your an excellent mechanic of all trades.
@brianfeeney1290
3 жыл бұрын
Another quality job James nice to see Thomas helping out with family business
@AZExpert
3 жыл бұрын
Thanks 👍
@davehaag8175
3 жыл бұрын
These are the videos i really like...i love looking at the 500k coachs but the videos like this one are the type of things i would incounter with what i can afford...great video, thanks for giving us your knowledge to help us less fortunate guys and gals!!!
@mylynne1953
2 жыл бұрын
Thoroughly enjoy all your videos. Always learn so much. The biggest lesson that always rings through is just how poorly they are built. I've owned one Tiffin, a couple of Newells and just bought a Prevost. And while the RV part always has it's own set of problems that they all have. Construction is seldom one of them.
@AZExpert
2 жыл бұрын
So true!
@VitoF111
3 жыл бұрын
Nice work. I like your method of using jacks and not having to remove the slide out.
@AZExpert
3 жыл бұрын
thanks!
@nylonstringninja
3 жыл бұрын
I had to do the slide out floors on my Outdoors RV basket case project. I had to replace all the the blocks and motors on the schwintek system and get them remounted onto the rails and found the rotten bottoms and framing in the box walls of the opposing slides. What a nightmare. My slide bottoms were filon and I went ahead and used the big box FRP being that it is on the bottom of the slides out of the sun and it was so much less expensive (and available). I had to do it parked in an uneven dirt storage lot and I found a 1000lb Harbor Freight hydraulic table cart that was excellent for lifting, holding, and adjusting the boxes while they were floating. I coated everything in 2 part epoxy when I put it back together. You're a saint for doing this. It's not a fun job.
@williamlambert2865
3 жыл бұрын
Learned a few tricks watching your videos. Thanks once again.
@AZExpert
3 жыл бұрын
Glad you like them!
@Amer1ca56
3 жыл бұрын
Thanks for this video. I have an Outback 210RS with delamination on the rear. It is constructed the same as this slide out. I am now confident that I can remove the trims as you did and access the area that needs to be addressed with adhesive and new materials as needed.
@AZExpert
3 жыл бұрын
most trailers are made the same way roughly
@dorothyallen3614
3 жыл бұрын
You can do it , I would try myself but I just don’t have the strength anymore. I learned how to check my roof and caulked it, washed it and painted it with the rubber roof paint ever third year since I bought it used , but I can’t get up on the roof anymore! It’s sad to get so frail, but my hearts into it!
@KristopherThompson
Жыл бұрын
Thank you so much for posting this! I was sure I was going to have to pull the slide to replace the floor. You made a difficult job fairly easy and saved our week and our RV!
@kbVACArestatecarsnrvs
3 жыл бұрын
You're the guy for the job 100%! I've got a similar problem in a BR slide and sidewall under a window at the dinette.
@AZExpert
3 жыл бұрын
thank you
@davidthomas4489
2 жыл бұрын
I know the feeling. Some shops and independents just won't work on your coach. It's like rolling the dice to see if someone will help. You are one in a million and I know that you are busy, but sometimes shops don't look at the big picture when a person is desperate and needs to get home (like I had to last Summer)or it's their home. Bless you and your dedication!
@AZExpert
2 жыл бұрын
Thanks for watching!
@theghostrider9964
3 жыл бұрын
You made that look to easy. Great job. Those folks are lucky to have you working on their rig.
@AZExpert
3 жыл бұрын
Thanks 👍
@cdpmedia2011
Жыл бұрын
The best explaining and most informative and instructive videos Ive ever seen on rv repair. you are awesome man.
@hillbillyrv
3 жыл бұрын
You are a brave man. I would not have thought this was possible. I can't believe there was not at least 2 screws underneath (towards the inside of the room) that you couldn't get to.
@agentorange2554
3 жыл бұрын
That's the way it usually goes. Then it's off to the grenade and dynamite store I go. LOL
@ckm-mkc
3 жыл бұрын
Sawzall with flex blade works in those situations....
@freemancoyote3499
Жыл бұрын
Exactly the repair on my 2010 Montana I'm about to undertake. I learned and gained confidence. Thank you for your time in making this video!
@charlieboggs5210
Жыл бұрын
When I replace floors in fifth wheel bed rooms slides I use advantech sub floor works good and also a brand of contact adhesive staput it works great in one of our own I got flat thinner steel cut and folded around the flooring and rapped and inch around it worked great and used white to match everything else I did was fairly similar
@cedarridgen2791
3 жыл бұрын
You are amazing! It was very smart to hold up the side out with those 2x2s and jacks. 👍👍👍👍
@AZExpert
3 жыл бұрын
Thanks 👍
@racerchaser27
Жыл бұрын
I actually installed the new floor in my slide and then installed the carpet from the inside and trimmed it to fit. I didnt like the carpet sandwiched between the floor and walls. It worked out very well. Also, my floor didnt have that solid avs plastic sheet on the underside. Mine had almost a black tarp like sheeting. I didnt replace that. I applied about 5 coats of black marine paint before I installed it. It made the slide 100% more solid feeling and will last 100 times longer than the original.
@AZExpert
Жыл бұрын
Thanks for sharing!
@patserra9506
3 жыл бұрын
Good things happen to good people. Your work ethic show in every video. Keep up the good work!!
@AZExpert
3 жыл бұрын
Thanks!
@kurthollyday4214
11 ай бұрын
A professional makes it look easy, but you make it look easy professionally. Great video!
@marlenepineda1079
3 жыл бұрын
You're a kind person willing to help those people. I always learn so much watching your videos.
@AZExpert
3 жыл бұрын
I appreciate that!
@matthewstrzelecki4280
3 жыл бұрын
What's it cost to do something like this
@matthewstrzelecki4280
3 жыл бұрын
You got the patience of a priest
@MrThunderbird53
3 жыл бұрын
@@matthewstrzelecki4280 I believe he mentioned in another video $250.00 per hour
@wazup3333
2 жыл бұрын
@@MrThunderbird53 how many hours? 16?
@dvparrish1
3 жыл бұрын
The world needs more craftsmen like you sir. Thank you for all that you do for the RV community.
@AZExpert
3 жыл бұрын
I appreciate that!
@dennissprague5172
3 жыл бұрын
"You learn and you learn," and You teach, TKS. Informative, as usual. The "Stilts",,,,,, awesome.
@AZExpert
3 жыл бұрын
Thanks again!
@bigjeep2195
8 ай бұрын
You make this look easy because you are so good at what you do.
@jeffpeterson4172
2 жыл бұрын
I wish I had seen your way of replacing a slide floor as I had problems with my Fleetwood Triumph as well as another 5th wheel. Thank you you for sharing your skills
@AZExpert
2 жыл бұрын
Glad it helped
@MySierraNevadaLife
6 ай бұрын
Im Halfway through my slide floor replacement, I just want to say THANK YOU! You saved me a lot of money and hassle!
@13yearsaprepperr.jtilbury.51
3 жыл бұрын
great job , I really would have thought that the box would have had to come out ,,, Thanks for the great info ,,,, im doing mine soon
@AZExpert
3 жыл бұрын
I learn a little bit each day. I have removed the slide for this before
@dkhallal
2 жыл бұрын
I will be doing this exact job on a Forest River Salem Light. Floor is completely rotted. Thankfully the walls are ok, they are wood. Shwintek sliders! They have been out of sync from top to bottom, not side to side, and I think that’s where the water has gotten in, mostly when it’s closed. This video gives me the courage to tackle it and save a couple thousand dollars! Thanks.
@AZExpert
2 жыл бұрын
Thanks for watching! :) Good luck on your repairs!
@dkhallal
2 жыл бұрын
@@AZExpert I have a question. I assume I have to at least disconnect the Shwintek gear rails from the slider in order to take enough weight off the floor to remove it, does that sound like it’ll work?
@mikebrand7922
3 жыл бұрын
Nice work James! Thanks for the tips
@AZExpert
3 жыл бұрын
Any time!
@andymeyer15
3 жыл бұрын
Great video...gave me the confidence to tear into the rotted floor of our Silverback that was very similar to this. One thing to pass on that may help others.....when i ran the jacks up to raise the floor off the threshold, the floor still wouldn’t pull out. I found a couple screws on each slide wall at the back corners. I could’nt get access to the head of the screws or even see them but was able to run my sawzall horizontally across top of the floor to the wall from inside the camper. With the screws cut, the floor came right out like in this video. Not sure why it had the extra screws.
@AZExpert
3 жыл бұрын
Glad you had the confidence to tackle it yourself
@professionalinspectionserv4228
Жыл бұрын
It's almost like they build them to leak. You would never put a home together that way. Trim and flashing should be layered like a roof...thanks for the information.
@edyoung6573
3 жыл бұрын
Wow great job!! Nice to know there are still kind humans out there!!! Wife and I just sold our 2005 Excel 5th wheel due to to many problems and I didn't have the know how. Sold it very cheap. Wish you was in our area! Anyways your a good man! Rock on!
@gunsandrotors8704
Жыл бұрын
You do great work! Your work ethic is rare these days.
@J.Cameron.Stuart.Adams.
Жыл бұрын
A master class of excellence! You sir have incredible skills and the ethics of a Saint. Those working on their own water damage should replace all soft goods such as carpet and wool insulation that was exposed to water or has evidence of mold/mildew (brown or black spots and dots). Hard surfaces such as wood, foam, foil barrier, wall board,, and the like can be sanitized with a bleach solution to kill off mold, mildew, and odors. However soft goods are nearly impossible to clean without considerable effort if at all. The carpet reinstalled here is going to smell indefinitely; particularly during periods of excessive ambient humidity. Attempting to clean the carpet after the slide is reassembled is only going to reintroduce some moisture into the walls and floor. These carpet sections are sandwiched between the floor and walls. The sandwiched bits of carpet is going to suck up liquids used to clean the carpet like a wicked. This moisture will then be wicked up by the wood in the walls and floor. While the amount of wicked moisture would be minimal, not causing damage; it can take a long time to dry. Thus one is left with a return of the offending odor to some degree.
@AZExpert
Жыл бұрын
thank you!!
@kimholmes5855
2 жыл бұрын
Thank you for this video. We had the same problem with our 2014 Sabre 5th wheel bedroom slide. After watching your video. We decided to do the fix ourselves. Thanks for showing us the way.
@AZExpert
2 жыл бұрын
Glad it helped!
@showcasecharlie11
3 жыл бұрын
You made it look easy...appears to be well within my skill set. I got 3 slides to do myself and it shouldn't cost me no 25k for the dealer to do it. I was thinking about patching it...but this looks better than a patch job. Bravo...
@AZExpert
3 жыл бұрын
should cost much less than that
@showcasecharlie11
3 жыл бұрын
@@AZExpert dealer quoted 12k just for the 10ft middle slide. Only has one corner on bottom that is wonky...said the had to remove entire slide and rebuild it entirely from scratch... Now that sounds like a hell of a jackup job if ive ever heard of one.
@borderprepper
3 жыл бұрын
You make a tough job that many shops wouldn't touch look easy. Nice work.
@AZExpert
3 жыл бұрын
Thanks 👍
@paulnaas2127
Жыл бұрын
The exact same thing happened to our bedroom slide floor on our fifth wheel. We did something different though. I never wanted to replace that floor again so I used pressure treated plywood and painted it with waterproofing ( the same as you would do when prepping a shower wall in your house. The floor is now completely waterproofed. I was surprised that you used regular plywood as you are the most efficient rv tech I’ve ever seen.
@akrangler
3 жыл бұрын
Why would people thumbs down? This was a great very informative video and I appreciate it as I’ve got to do the same exact job on mine.
@AZExpert
2 жыл бұрын
Thanks for watching!
@fbeaston
3 жыл бұрын
Your a good man helping plus we need 100's more RV techs like you. Great job as always!
@AZExpert
3 жыл бұрын
Thanks 👍
@TylerP-u3l
Жыл бұрын
Greatly greatly appreciated this video. Was able to replace the floor in our kitchen slide in about a weekend by myself!
@mickthedawg4575
3 жыл бұрын
If I were a savy manufacurer, I would hire you to come tell my engineers what works and what dosent and how seal joints have to be made,
@AZExpert
3 жыл бұрын
No one likes to be told what to do
@dorothyallen3614
3 жыл бұрын
@@AZExpert and some people need to listen to engineer intelligence for their own good too!
@marilyngatson2289
Жыл бұрын
Can you give more information on the different tools you used. Size screws you used, size nails you used for slide out facial board, impact drill, and so on. Sorry for all the questions but you videos are very informative but some of the tools I wasn't sure of what you used. Way to go! Awesome Job!
@AZExpert
Жыл бұрын
Hi! Sorry I dont usually keep track of the exact size of things and this was ages ago
@Gopher7
Жыл бұрын
Excellent tutorial on a repair many may need guidance on when you own an older RV. Thanks!
@whome4ux
Жыл бұрын
That was completely awesome! You've give me some serious confidence about my ability to maintain an RV myself.
@AZExpert
Жыл бұрын
You can do it!
@Big88Country
Жыл бұрын
Great job! You actually made that look very easy! Appreciate you taking the time to video this repair!
@hcrffi
3 жыл бұрын
👍👍 James creates another happy customer.
@AZExpert
3 жыл бұрын
thanks
@michaelfoster7065
Жыл бұрын
I just bought a beater 2001 trail lite 8263-s camper. Gonna have to do a crap load of work on it in best case scenario. Worst case I'll get rid of everything and it will be a dual axle trailer base of some sort. It was $500 I couldn't pass it up. I have watched several of your videos and other videos as well but you are the RV guru man!!!. I will be contacting you with questions unfortunately. Cheers mate ,🍺
@haroldseaman4243
Жыл бұрын
Thanks for the video my uncle has the same issue in the same place this video is awesome! I'm going to be taking this job on in the spring.
@jasonpaul3000
3 ай бұрын
I have this exact issue with my 2006 jayco 5th wheel slide out. This is gonna be the perfect video to help me out. Thank you!
@derstuka96
3 жыл бұрын
Very educational video James!! I bet the owners are ever grateful to you!!
@AZExpert
3 жыл бұрын
I think so. Thank you
@midnightsailor1
Жыл бұрын
Very interesting. I am curious why manufacturers or repair experts don't use a penetrating epoxy on the plywood especially at least the end grain ( something like west system) to seal and prevent water intrusion into the end grain of plywood? This is done in boat building and I would think it would prevent a lot of rot if a bedding sealant is compromised..
@DanGarrett23
Жыл бұрын
I have a one-year-old big RV with damage similar to this one! I wasn't sure how I could fix it until now! Great video! To bad your not in Texas!
@EconomicRefugees
3 жыл бұрын
Nice job, you make it look easy, the way you were talking I think you thought it was going to be much harder !! we as ful-timers really appreciate a guy like you who will step up and help !! The wife and I were working at a large rv dealer and a family came in after hours with only 3 wheels on their travel trailer, I checked and we had all the parts, but because they didn't buy the trailer from us, THE OWNER, said we won't work on it, really PISSED me off !! I had to send the family down the road !!
@AZExpert
3 жыл бұрын
that's awful
@dorothyallen3614
3 жыл бұрын
What goes around, comes back around, being unkind to others begets unkindness, he’ll learn the hard way.
@coreymerritt7742
3 жыл бұрын
Wow nice job being out in the field good trick using the jacks
@AZExpert
3 жыл бұрын
thank you
@mrmped1
11 ай бұрын
Thank you. Just found my floor rotted on a 2018 Bighorn.....on the bedroom slide. I'll have to figure out how it got in. I have been re-caulking this thing every year. .
@quicksoncamping2039
9 ай бұрын
Looks like your process is perfect. Great job.
@Buck1954
Жыл бұрын
I have the same issue. I like the larger, new aluminum angles on the bottom. I have a small scaffold I can place under the slider with slider jacks to hold up the slide. Watching you filled in some knowledge gap that I didn't have. I don't have the hard abs on the bottom, but a flexible mat, which, in my opinion, is garbage. Also the ledge along the bottom opening is thin, and broken in multiple pieces. I had to rebuild the entire last 12 feet of floor in my toy hauler room. I used screw jacks to lift the entire aluminum frame in order to place lexan shims between the aluminum frame and the steel frame. I won't go into all that I did, but hasn't leaked or budged. The lesson I learned is that these trailers are built sloppy from the factory.
@tcwaterdrill
Жыл бұрын
Why do they not use treated plywood?/// in the RV floors
@shawzymusic
3 ай бұрын
To save money
@brookecobb63
Ай бұрын
To make more money when you need parts to be replaced, or just straight out buying another camper if you rich and bougie. I guess using quality materials that are more resistant to rot would have been too old school american.
@admorris11
3 жыл бұрын
Awesome job..very satisfying to watch for some reason.
@AZExpert
3 жыл бұрын
Glad you enjoyed it!
@SJ-gd6bo
3 жыл бұрын
Little late to the comment section, but why don't they add flashing between the siding and the sheathing. Treat it like any normal house wall, you could do it to your repairs as well. Looks like you would have to pop some staples to re secure it, but we'll worth it. However, nice work, to bad every slide is guaranteed to have this issue.
@q_clips6765
Жыл бұрын
YAY ! 100% EXACTLY my problem I have on my new ( second hand) RV! Same slide out same model almost ! This really helped me thanks
@bruceclaxton5721
3 жыл бұрын
Thank you for the concise and informative videos that you post on KZitem. You have helped so many of us to repair our own problems, that we could never afford to pay someone to do for us. This video was exceptionally great in my case, except for a small difference. I have a 2013 Sanibel with 4 slides in it. All are in great condition except for the bedroom slide, like the one in this video. The exception being that mine is a Schwintech slide, with the aluminum gear strips along the bottom. Have you ever made a video, or if not, could you make one, on dealing with replacing a floor in one of these? The other difference id that it has 2 floors, the exterior sub floor and the upper floor under the bed, both being rotted out in the corners and along the outside edge. If you don't have anything on this, can you possibly point me in the right direction? Thank you again for all the help you have provided for so many of us:-) Bruce in Florida Correction on this, it only has a single 3/4" plywood floor.. Nothing on the Lippert yet AZExpert?
@AZExpert
3 жыл бұрын
Thanks! I'll take it into consideration
@dammitdon4123
3 жыл бұрын
That 3M stuff releases when its hot. Grab the Permatex spray adhesive at the parts store. It works great. Its where the other permatex products are. Great job on the floor replacement. You need an easy button to hit once youre done.
@mrinspector2206
Жыл бұрын
good repair, only thing I'd add is a drip edge which the manufacturers finally figured out on newer trailers. A bent piece of metal or plastic on both sides because surface tension of rain drops rolling down and then staying on the underside causes majority of rotten floors on slides. You can also use eternabond under the side trim piece and wrap it underneath to prevent water intrusion
@ThePeopleVerse
3 жыл бұрын
Sure seems like a tiny little redesign of that gutter extension would save alot of people this hassle/expense. Do the topper video. Gonna be having a debate with the wifey on whether or not we tackle ours ourselves...and the awning as well. Saw the video where the pros showed up and did the job. Probably have to glean a bit more from that one before I try doing that job. LOL
@duncanjames914
3 жыл бұрын
Very impressive. Man, you sure know your stuff!
@AZExpert
3 жыл бұрын
I appreciate that!
@brucewise2630
Жыл бұрын
All the videos I watch with you, people are very fortunate you doing the work and cares always a great job👍
@walkingthruyourdata-6019
Жыл бұрын
It's good your taking care of it. whatever speed they raced thru building it at the factory, you can clean and do correctly and no more problems for 20 years..good work!
@lostsoul660
3 жыл бұрын
Thanks for making another excellent video very educational, it's good to know and see true honest professionals.
@AZExpert
3 жыл бұрын
Thanks for watching!
@walkingthruyourdata-6019
Жыл бұрын
I've torn into mine. The living room flushmount. HaHa..my first repair of my new RV...All downhill from here!
@RD-qc3eb
2 жыл бұрын
Excellent. You are amazing. I will be adding those weep holes myself now. I keep sealing but water is still being slowly absorbed on the bottom of the slide outs.
@AZExpert
2 жыл бұрын
Thanks for watching!
@randylittle4187
Жыл бұрын
Thank you for your video, I did our bedroom slide in our 07 Forest River, never would have tried it without your video😊
@marklebeau7412
Жыл бұрын
Awesome video and great tips. I'm doing my floor today and your video was spot on. Thank you
@RantzBizGroup
Жыл бұрын
You will NEVER run out of work doing this in the RV industry 😏.
@chrisknowles
3 жыл бұрын
You sir, are a prince. I'm sure they appreciated your fine work!
@AZExpert
3 жыл бұрын
Thank you kindly!
@lisateal8915
Жыл бұрын
We are going to have to do this on our bedroom slide. Thank you for showing us how to do it!!
@AZExpert
Жыл бұрын
Best of luck to you!
@austinosborne2638
Жыл бұрын
Thank you! I have to do this same exact thing on our camper too.
@pault1964
3 жыл бұрын
You always do a nice job, the owner’s should be very happy
@AZExpert
3 жыл бұрын
thank you!
@alleningram2032
3 жыл бұрын
You are definitely a Master RV Tech. 👍🏾
@AZExpert
3 жыл бұрын
Wow, thanks
@clarkjacobson4821
Жыл бұрын
Nice Job! You made it look simple.
@markjohnson-ub5pw
Жыл бұрын
Thank you, I will be working on my forest River silverback bed area floor rot
@billyclemons7335
2 жыл бұрын
Wonderful thanks for helping. You got this.
@AZExpert
2 жыл бұрын
Thanks Billy
@RADMAN752
3 жыл бұрын
at the shop i worked at we had a really hard time doing floors while in the trailer. we always had to take them out. i just watched a miracle, lol your method is smart thanks for sharing, will try this.
@AZExpert
2 жыл бұрын
Thanks for watching!
@christopherford8318
2 жыл бұрын
That RV is just like my Montana. But I noticed that one doesn't have a generator made into the front panel out side with a start button in the bed room
Пікірлер: 662