Andy, You are amazing. Totally enjoy the shop videos. Thank you for your videography.
@jimc4731
4 жыл бұрын
Andy, you're a natural for these you tubes. Love em! Thanks, JIM
@corydevries3494
4 жыл бұрын
Great video! Always keeping the wheels turning!keep up the good work
@robertbradford2734
4 жыл бұрын
Sounds extra healthy now good job...👍
@jaytee3219
4 жыл бұрын
You are very disciplined in your commitment to make videos,,,, I appreciate it..... I would get wrapped up in a job and forget to be attentive to the camera..... there is also a serious lack of swearing while turning the wrenches. I never knew engine work could be completed without swearing and outbursts,,,at least 2 or 3 thrown tools?
@GosselinFarmsEdGosselin
4 жыл бұрын
LMAO!! He is much more civil and quieter than I am. (But I do watch my language when I am making videos, it's not easy, but so far I've been a good boy😎😂🤣)
@FarmingFixingFabricating
4 жыл бұрын
There isn't any need to swear.. . Lol
@3069mark
4 жыл бұрын
@@FarmingFixingFabricating -- That's one of the things I like about your videos, Andy!
@leesteele9290
4 жыл бұрын
Any day you can put a KW back into service is a good one!! Congrats on the rain , after the monsoons earlier this spring it's gotten really hot and dry here! Thanks for the video!
@FarmingFixingFabricating
4 жыл бұрын
Yes the Eaton felt good
@mikebonge7206
4 жыл бұрын
great job, nice to know what you are doing
@wayneburndred7457
4 жыл бұрын
Great video you and your torch have had many battles
@andrewwoodhead8305
4 жыл бұрын
Twas a very nice day to be switching turbos!!👍👌💪
@FarmingFixingFabricating
4 жыл бұрын
Yes it was
@rjacobs1200
4 жыл бұрын
Thanks for keeping us entertained You are the best
@matthewjohnson3910
4 жыл бұрын
Good job andy
@johncheatham897
3 жыл бұрын
Truck 12 gets a lot of love.
@egan88817
4 жыл бұрын
Early morning video lets us see the not so sleepy Andy. 🤣 With this one your fingers had no chance of frostbite, and they even parked the truck so you had shade. This project looked to be fairly easy go for you, given this was being changed in the field instead of the shop. Sure sucks that this is the 3rd turbo you had to replace so far this year, maybe the "things happen in 3's" is done with you, for the bad things, hope the 3 good things happen soon for you. 👍 Thank you for today's video.
@FarmingFixingFabricating
4 жыл бұрын
Yes hopefully we get a break from turbo failures.
@johnhennebry3205
4 жыл бұрын
Hot wrench Andy. 👍
@mrandrewdennis1
4 жыл бұрын
Great video!
@mikemuniak4711
4 жыл бұрын
You make it look so easy pillars time I did one was not fun but only took me 2hours and that cause bolts broke ,lol yeah it was a fratshaker lol
@arkansas1336
4 жыл бұрын
You got it fixed even if heat was involved....lol. After all it is summer.
@GosselinFarmsEdGosselin
4 жыл бұрын
Remember the days turbos were all timed to the application and all seal wired?? I do😪 much nicer now days, you don't have to fight the oil lines anymore 😎
@FarmingFixingFabricating
4 жыл бұрын
I think that was before my time
@GosselinFarmsEdGosselin
4 жыл бұрын
@@FarmingFixingFabricating you do have a sense of humor!!! I remember changing the turbo on the 4430 we had, little Garrett turbo... 404 I believe, had to get the correct on, because all the bolts were sealed, bust a seal and no warranty. Was the same on the AC tractors we had too.
@rodneyerdmann1545
4 жыл бұрын
As much heat as those turbos endure during their life, I wouldn't think a little torching would do much!
@planeiron241
4 жыл бұрын
Turbos & Beer yep
@hughwhaley3179
4 жыл бұрын
Geter done Andy a little mountain dew will make her per love your videos 🌽🌽🚜🚜👍👍
@hughwhaley3179
4 жыл бұрын
🚜👍
@bigwheelsblacksmoke4624
4 жыл бұрын
Andy looks to me like a gas axe is your favorite tool in the whole world. I sometimes wonder if you favour doing the jobs on your farm where you get to be able to burn things off and then leave the wrenching jobs to your guys.
@knowltek
4 жыл бұрын
Must’ve cleaned that inercooler filter out...hehehe
@chriswithington7557
4 жыл бұрын
Ran a n14 Cummins that started like that
@2fast65
4 жыл бұрын
I had a turbo go on a c10 cat it sent turbo fins in to the after cooler i had to replace that also.
@FarmingFixingFabricating
4 жыл бұрын
That's horrible
@badguy2419
4 жыл бұрын
So the turbo doesn't need to be calibrated with the ecm?
@keenankelley187
4 жыл бұрын
Ah what the Hell I went ahead and watched. We’ll see how my luck goes. 👍
@FarmingFixingFabricating
4 жыл бұрын
Lol
@archiearnold7354
Жыл бұрын
Will one of those work on a 5.3 Chevy truck stock bottom end cam head
@ihguy2113
4 жыл бұрын
hopefully no internal damage Andy im sure you will get it done right
@FarmingFixingFabricating
4 жыл бұрын
Nothing so far
@tractorboy31
4 жыл бұрын
@@FarmingFixingFabricating glad to hear that cause that could be bad
@dougmeyer4649
4 жыл бұрын
Shade tree Mechanics!
@rogerwilson9892
4 жыл бұрын
The blades they broke apart because on blade must have broke off and done some damage to intake.
@ozz5350
4 жыл бұрын
👍
@davie2606
4 жыл бұрын
Do you not change engine oil and filter with the new turbo?
@FarmingFixingFabricating
4 жыл бұрын
I didn't change it yet
@noelhohberger1188
4 жыл бұрын
When are you going to start combining wheat?
@FarmingFixingFabricating
4 жыл бұрын
Maybe tomorrow
@jeffreybegeman9544
4 жыл бұрын
At least it didn't dump oil into the intercooler. If that happens and you don't clean it the engine could run away.
@GosselinFarmsEdGosselin
4 жыл бұрын
I know a few people that's happened to.... Wasn't good!
@FarmingFixingFabricating
4 жыл бұрын
Yes that would be terrible
@leejamestheliar2085
4 жыл бұрын
Don't pay no attention to the torch, 😂😂😂😂 No, I won't pay any attention...... Thx. Have a good weekend. Mtn dew works as a sealer? Many thanks, that could be what I have been looking for!!!!!! Can't wait to show everyone. *****?,?,?,*****
@stanleyjohnston5876
4 жыл бұрын
Try brushing copper anti-seize on part of the elbow that fits into the turbo. that should help remove when needed. Just FYI, love your videos.
@chriswithington7557
4 жыл бұрын
Cat anti-seize is copper based, works awesome
@FarmingFixingFabricating
4 жыл бұрын
The guy before me needed to do that
@TG-jw5mf
2 жыл бұрын
Can you fix a broken Turbo without buying a new one? Anyway to refurbish it at a shop?
@FarmingFixingFabricating
2 жыл бұрын
No not really
@mattellis6306
4 жыл бұрын
Is it common to find a engine that big in a straight truck over there? Be no performance issues I’d imagine.
@FarmingFixingFabricating
4 жыл бұрын
Pretty much yes, they are hauling heavy and on hills
@TolaTrucking
3 жыл бұрын
Do these turbos need calibration when installing?
@FarmingFixingFabricating
3 жыл бұрын
No
@jamesmckay9966
2 жыл бұрын
I Googled Turbos and found out the following: An Aircraft Engine which is not Super Charged {Turboed}, loses 50 percent of its rated Horse Power at 18000 feet above sea level. The engines which were used in the Curtis P-40 were not turbo charged and suffered in performance.
@petenolte4192
4 жыл бұрын
When are you going to do another live stream chopping?
@FarmingFixingFabricating
4 жыл бұрын
Tomorrow morning maybe
@petenolte4192
4 жыл бұрын
@@FarmingFixingFabricating sure when I'll be in a place with no cell coverage LOL
@williamj.barnhartjr.3108
4 жыл бұрын
Andy I have a question it may be stupid or I maybe thinking about a different motor but when when we replaced the turbo on the cat I drove we always had to pull the exhaust manifold and replace these cups that chipped apart and went into the turbo, don't you worry about that or doesn't that motor have that. Thanks for sharing God Bless you and your family.
@FarmingFixingFabricating
4 жыл бұрын
This one isn't like that
@Gustav4
4 жыл бұрын
haha What year is this truck? "Old one."
@FarmingFixingFabricating
4 жыл бұрын
2001
@Seveneleven44
2 жыл бұрын
Time to break out the heat wrench.
@carsons6519
4 жыл бұрын
That hesitation then fire again is a bad crank sensor it starts on it then has a bad signal then switches to the cam sensor and will run off it..it will not throw a light as long as one if functional but if it does go out it will quit all together
@FarmingFixingFabricating
4 жыл бұрын
Thanks for the info
@simonquesi2869
3 жыл бұрын
How much is a twin Turbo in those engines ?
@FarmingFixingFabricating
3 жыл бұрын
Not sure
@kailon_br7841
2 жыл бұрын
Which turbine? And whats the measurements
@FarmingFixingFabricating
2 жыл бұрын
Don’t recall off hand
@curtweatherbee2523
4 жыл бұрын
👍🏻🇺🇸🐝
@SouthEastStanger
3 жыл бұрын
Make a funnel out of a piece of paper, I do it all the time when pouring oil in my truck.
@AmanuelChala
3 жыл бұрын
What type of oil will added to turbo and does turbo take half quart or..? Please respond anyone knows. Thanks
@FarmingFixingFabricating
3 жыл бұрын
Engine oil, only need about a pint
@AmanuelChala
3 жыл бұрын
Thanks
@williamreedy5384
4 жыл бұрын
You always replace air filter cos of metal fragments thrown up into filter and when started after turbo replacement sucking metal thru turbo normally voiding your warranty
@FarmingFixingFabricating
4 жыл бұрын
There wasn't anything in it
@williamreedy5384
4 жыл бұрын
@@FarmingFixingFabricating come on be honest ur a farmer u didn't even check it
@FarmingFixingFabricating
4 жыл бұрын
@@williamreedy5384 it got pulled before the truck was started. We blow the hay out of the air cleaners everyday.
@williamreedy5384
4 жыл бұрын
@@FarmingFixingFabricating one of a few , glad you checked it . Check ur intake fins in a month and see if the ends are o.k. all i,m saying is when the turbo came apart there's enough force to send fragments into the air cooler , i,d just hate for u to gave to buy another turbo unnecessarily.
@FarmingFixingFabricating
4 жыл бұрын
@@williamreedy5384 thanks bud, it's amazing that more stuff didn't destroy itself on a regular basis. Everything is a ticking time bomb.
@natebell20
4 жыл бұрын
20k front axle dual steering boxes, Do you run chalmers rear suspension?
@natebell20
4 жыл бұрын
I answered that question when he pulled away, that’s a yes 😂
@FarmingFixingFabricating
4 жыл бұрын
Chalmers,HMX,HMN and Hendrickson spring ride on the straight trucks
@user-dw1ti5ce5m
4 жыл бұрын
Нормальний шат , ще їхати і їхати .....
@jocalafarms4051
4 жыл бұрын
James still on the payroll? Haven't seen him in any videos lately
@FarmingFixingFabricating
4 жыл бұрын
Unfortunately he has since moved on and isn't part of us anymore. He found employment at a gas station I believe.
@jocalafarms4051
4 жыл бұрын
That's to bad looked like he had a knack for changing tires
@inmotion81
4 жыл бұрын
Sounds like you need call Garrett get after market turbo maybe better quality then cats .
@JohnWilliams-gd5jh
4 жыл бұрын
What’s your favorite truck?
@FarmingFixingFabricating
4 жыл бұрын
One that doesn't break down..... The flavor has a tendency to change frequently
@ethanhuber5360
4 жыл бұрын
Those turbos are biting you lately
@FarmingFixingFabricating
4 жыл бұрын
Yes
@jasonkoehn1074
4 жыл бұрын
Mabe u may know is 11,000 hrs a lot if ur were going to purchase a dozer
@FarmingFixingFabricating
4 жыл бұрын
Not really, they can be wore it at 3500 hours. Depends on what condition the under carriage is in.
@HuntGamingProductions
4 жыл бұрын
tell shawn stop doin boosted launches
@FarmingFixingFabricating
4 жыл бұрын
Lol
@HuntGamingProductions
4 жыл бұрын
@@FarmingFixingFabricating great vid as always boss
@jerome8469
4 жыл бұрын
I'm First Hi Guys Peace !!
@kerrypope767
4 жыл бұрын
Tune in to JPAYDIRT for Cat engine tips , Your vlogs are great ... Keep up the great work
@FarmingFixingFabricating
4 жыл бұрын
He is a great guy ain't he
@kerrypope767
4 жыл бұрын
@@FarmingFixingFabricating Switch blade turbo on the c15 .
@tractorboy31
4 жыл бұрын
I would like a certified dirty sticker he showed on i believe somebody elses trk for my 97 7.3. Love jpaydirt
@FarmingFixingFabricating
4 жыл бұрын
@@kerrypope767 we put one on a mbn cat C15 but didn't see any difference
@robertquast9684
4 жыл бұрын
I think j paydirts big difference came from getting rid of the twin turbo setup going to a single
Пікірлер: 117