Thank you for this video. I was able to repair my gimbal. In my case, one of the cables was torn so I ordered a replacement and used the video as the guide to repair.
@Duranafy
3 жыл бұрын
Glad it helped my friend!
@phdz9390
2 жыл бұрын
Hello could you please tell me from where you ordered the new cable ?
@Blueskyver
3 жыл бұрын
Waw, as always doing amazing repairs, Al!
@Duranafy
3 жыл бұрын
Thanks again @BlueSkyver! Take care!
@EddieWrightBBQ
2 жыл бұрын
I have this same issue. I have a little more damage. I was gonna repair it myself but I was freaked out when someone said the cameras are serialized to the drones and wouldn't work. Where could I get more info on what type of replacement camera to get that will work properly.
@HawxAnimator
3 жыл бұрын
Many thanks for the video, thorough and in depth, big thumbs up from me!!
@Duranafy
3 жыл бұрын
Glad it was helpful! And thank you sir!
@johnmbradbury777
2 жыл бұрын
Brilliant,just need a camera housing lol
@Duranafy
2 жыл бұрын
Thank goodness you do not need the gimbal!
@RonaldBrown59
3 жыл бұрын
I'm sorry about your crash, and damage to your camera and gimbal. And it's a shame you weren't able to get it working again, but thanks showing how to take apart, and for that look inside.
@Duranafy
3 жыл бұрын
Thank you Ron! How the heck are you my friend!
@vcdroneGR
3 жыл бұрын
Good job with the mavic air 2 gimbal👍👌
@Duranafy
3 жыл бұрын
Thanks 👍 you my friend! How are things in your side of the world @Vassilis Chatzimanolis? I really enjoyed your Zino Pro Hyperlapse video. My Haperlapses did not come out as nice as your!
@vcdroneGR
3 жыл бұрын
@@Duranafy Thanks a lot for your good words! We're facing the 2nd phase of covid-19 here in Greece as well and it is quite hard to do our daily activities, even to fly my drone😕 But I've already completed a range test with ZIno Pro few days ago which I'm going to upload into my channel soon. Stay tuned to see the result!
@tavitoochoa6770
5 ай бұрын
I replaced mine and now has jello effect and shows gimbal motor overload. Any way I can fix this?
@t0mme2t0ne85
3 жыл бұрын
It's probably not safe to be working on any of those internal components while the battery is still attached. I would have removed it before even opening anything up. Practice caution when working with electronics.
@Duranafy
3 жыл бұрын
Totally agreed! My mistake!
@uksewingmachineservice7030
3 жыл бұрын
Great job mate looks like you are having fun with it hope OK now mate don 🤠🇬🇧👍👍👍👍🙏
@Duranafy
3 жыл бұрын
I am! Thank you UK!
@CoasttoCoastDrones
3 жыл бұрын
I hate it was damaged ....but thanks for the look inside !!
@Duranafy
3 жыл бұрын
Thank you Bill!
@CoasttoCoastDrones
3 жыл бұрын
@@Duranafy you are very welcome sir !
@joseanselmosoriano2586
2 жыл бұрын
hello, may you please post a link where to order camera parts? thanks! really appreciate it!
@patricklu1900
3 жыл бұрын
nice try though.... tnx for effort and letting us take a closer look on those internals..... good job...
@yashwantmahendran
2 жыл бұрын
Sir I looking to replace mavic Air 2 gimbal only. No sure how to find a genuine part
@Duranafy
Жыл бұрын
Aliexpress should have the gimbal
@theviewchaser6718
3 жыл бұрын
My friend the problem there is the ribbon cable inside the camera it will cost less than 20 bucks on eBay we just replaced the one on the mavic mini
@Duranafy
3 жыл бұрын
I will relay that information to the friend!
@theviewchaser6718
3 жыл бұрын
@@Duranafy yes I did that to the mavic pro and will do my mavic 2 pro cam , there are two cables the ribbon cable power and controls and the other is a video controller cable usually round with many little cables on it , have him replace booth ,it's easier on the air 2 since the camera is cheaper
@davidrucci
7 ай бұрын
Thanks so much for the very calming and thorough video. I ran into this same issue but luckily all is working with the camera. Broken yawn arm. Only thing is the person that fixed the yawn arm did so with super glue and twisted those thin wires in a twist incorrectly. I carefully removed the superglue he used and tried to redo the wiring and gimble placement correctly. I’m getting zero errors now THANKFULLY. But when calibrating the camera sits in the neutral position crooked. Like it’s off to an angle on one of the axis. Any idea why this is? Any ideas to fix it? Again, no errors, and it calibrates just fine, just doesn’t sit horizontal when ready to use. Thanks for any advice! 🙏🤙
@Duranafy
5 ай бұрын
Thank you @Davidrucci! Have you tried calibrating it with DJI Assist?
@davidrucci
5 ай бұрын
@@DuranafyI did. And to no avail unfortunately. I later found out that the yaw arm ends are polarized. Meaning from the factory they are set in a specific placement, and if that get disturbed we’re pretty much SOL for being able to get it in line again. So even though everything else was fixed a full gimble fixture replacement is necessary.
@pril250
3 жыл бұрын
Hope to see it live soon.....and for god sake get yourself a pair of blinkers while you are at it....LOL
@Duranafy
3 жыл бұрын
Ha Ha! I have blinkers somewhere... I guess I have better find them!
@rodrigoprado7333
2 жыл бұрын
I replaced gimbal/camera and now it is asking for activation, and every time I tried I get the error oxffe Does anybody know what it is?
@dronevideographyflorida2735
2 жыл бұрын
Thank you so much, I will try to fix my drone... If I need to replace the actually camera/gimball do you know what that would be called?
@Duranafy
2 жыл бұрын
Just like you mention gimbal with camera!
@jetmartin9501
3 жыл бұрын
Sorry to hear about your MA2 but thanks for sharing...super helpful..hopefully I'll never have to do what you just did in the video....I assume you are just going to replace the entire camera/gimbal assembly? I wonder if they sell the Gimbal assembly as a separate FRU..Maybe the camera is still perfectly fine if you just replaced the Gimbal Assembly? Just a thought. Keep us posted. PS. I assume you've already go the Skydio replacement? in hand? And by the way...thanks for sharing links for the tools you used to work on your drone. Have you found the screw driver set to be very good. It's a great price...sometimes when you buy things like this a such a great price the metal can be a weak/soft and the bits get stripped. Let me know your experience with this set. Again a great price if it's good quality. Cheers
@Duranafy
3 жыл бұрын
Hello @Jet Martin, You are welcome and lets hope you do not have to this too! The tool set is actually not bad I use it all the time and have not seen any metal fatigue issues. Stay safe and sound my friend!
@jetmartin9501
3 жыл бұрын
@@Duranafy Thanks.
@jcautosalesrangervillerd2584
3 жыл бұрын
I think that what you have to replace is the harness wires you camera looks goog I have the same accident and the wire tears and the gimbal holder is broken
@mikhail805
3 жыл бұрын
@@jcautosalesrangervillerd2584 is there a link for the gimbal holder??
@terryshrives8322
3 жыл бұрын
Great video, The new gimbal used to be about $125, but of course because it's a hot item now they want $300 for it. Really to bad.
@Duranafy
3 жыл бұрын
Thanks for the support. Supply and demand will always rule.
@redwill4
3 жыл бұрын
The same exact physical damage on the small cap on the gimbal occurred on my camera, but my camera is initializing when turned on, and everything else seems fine (the damage is EXACTLY the same as yours, it's strange). Do you think there'd be any issue with flying the drone with the wiring half exposed from the half of the cap missing like it is on yours? That's my only concern. Thanks for the help!
@Duranafy
3 жыл бұрын
You should be fine! I just a cap to protect the wiring harness! I would run until it broke then I would fix it! Good luck @Will Foster!
@jcautosalesrangervillerd2584
3 жыл бұрын
Mine broke from the same part where did you find the replacement brake
@Duranafy
3 жыл бұрын
Sorry to hear that friend! Go to Aliexpress.com... www.aliexpress.com/item/4001291917221.html?spm=a2g0o.productlist.0.0.12734f1fskIsSx&algo_pvid=8e9b8775-e7f5-4087-97f8-c955ee7a1549&algo_expid=8e9b8775-e7f5-4087-97f8-c955ee7a1549-2&btsid=0b0a557216047641584664392e2fa2&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
@jesusalm69
2 жыл бұрын
where you buy the new cam/gimbal?
@Duranafy
2 жыл бұрын
Aliexpress, Banggood or Gearbest .com
@theviewchaser6718
3 жыл бұрын
I have the same problem or similar with the mavic 2 pro camera will have a video on my ch on how to dow it 👍👍
@Duranafy
3 жыл бұрын
I will check it out
@tdrdronesebikesandscooters8377
3 жыл бұрын
That looks doable
@Duranafy
3 жыл бұрын
Very much so! You can do it with your eyes close Bryan!
@Northstar-Media
3 жыл бұрын
Nice work. I know it's not your drone but are you guys having drone battles in Virginia. Hope you manage to sort it for him. How much did DJI want to fix it?
@Duranafy
3 жыл бұрын
Thank you! I really dont know how much DJI would want to fix it? I will ask!
@TheBubo82
3 жыл бұрын
Very nice. I had the same problem, with gimbal on the same place. Even comunication cable was broken. So I ordered cable on Ali, then bought high quality second glue and fixed it. Everything good, BUT. On this broken axis, in one very very tiny place (position) there is very very tiny scouring at one point. So drone works like before, but sometimes (especially in sport mode = large differences in the movement of the drone to the camera) it says gimbal overloaded and stay in inclined position. Then I must land and, and restart drone. Do you know please, if is possible and how disassemble every single axis and look inside? I dont want do it by power or without asking.
@Duranafy
3 жыл бұрын
Yeh! Congrats on saving money. But, more important you are back up and running quicker than send it for repairs. Thanks for the kind words!
@Videoeditorpr
2 жыл бұрын
Where buy the glasses
@Duranafy
2 жыл бұрын
AliExpress.com should have all the replacement parts you need!
@jcautosalesrangervillerd2584
3 жыл бұрын
HI where did you buy the camera, I broke mine yesterday
@Duranafy
3 жыл бұрын
OH NO! Sorry to hear about your camera and apologies for the late response. No I sold the broken drone and bought new one. Sold it for $500. The new camera was was about $200.
@TheFlyingPI
2 жыл бұрын
Where can I get that mat?
@Duranafy
2 жыл бұрын
@Dorian Bond, sorry for the late response. Amazon is the best place to find it! amzn.to/3L7Fxnx
@Tom-jz6ue
3 жыл бұрын
after replacing the gimbal do you have to fix errors or not?
@Duranafy
3 жыл бұрын
Yes!
@optimumbreaker
2 жыл бұрын
@@Duranafy I have hear the errors do not come off unless you send to Dji is this true by any chance? Have you found a way to clear the error codes and if so could you share the process preety please?
@ifyoueverwondered875
2 жыл бұрын
Omg where can I get my replacement for 280 dollars????
@Duranafy
2 жыл бұрын
Aliexpress.com gearbest.com or banggood.com
@tdrdronesebikesandscooters8377
3 жыл бұрын
How much was the camera
@Duranafy
3 жыл бұрын
About $200 USD from aliexpress.com
@EDVOficial
3 жыл бұрын
Did you need to code the gimbal with python??
@rodrigoprado7333
3 жыл бұрын
I fixed mine with super glue and the gimbal is working but no images on the camera 😂
@Duranafy
3 жыл бұрын
Great to hear you where able to fix your gimbal. Some people accuse me of owing super glue stock! LOL!
@dronesetc9769
3 жыл бұрын
Your Gimbal looks like it wasn't moving at the end, when replacing the gimbal on this model it requires DJI software to calibrate it or it won't point straight. This video is not helpful really.
@Duranafy
3 жыл бұрын
Okay... Thanks for the information!
@davidrucci
7 ай бұрын
Yeah. That’s the issue I’m having. Everything is fixed thankfully but the camera on the gimble sits crooked and won’t align correctly. It even recalibrates fine via the RC. 🤷♂️
Пікірлер: 80