May 2024 and I bought the one from doorman. A few of the downsides you mentioned have apparently been improved upon. This video was GREAT. THANK YOU!
@mowtivatedmechanic1172
10 ай бұрын
Got it. I’m calling a locksmith for trucks.
@PiperPilot71
Жыл бұрын
Awesome! Thanks. Couldn’t find a video showing how to remove.
@halflife82
Жыл бұрын
Thank you! Need to replace my 2013 F150 lock cylinder as well and rekey the tumbler. This helped a ton! 👍
@sparta9472
3 жыл бұрын
you have to remove the front of the original tumbler because the guts come out from the front on the original one , then you can pull each waffle tumbler out one by one and the numbers are stamped on them
@Edgar_Acosta
Жыл бұрын
How? I only managed to remove the silver ring
@TheThemastermind209
7 ай бұрын
Thank you
@mrstl3000
2 ай бұрын
How
@timnewton8308
2 ай бұрын
@Edgar_Acosta the key cylinder needs to be in the on position for the silver plate to be removed. Then the core can be slide out.
@MrEbnyprnce
2 жыл бұрын
This was great. Haven't done it yet, but easy to understand the steps.
@jockbarnes7485
2 жыл бұрын
If you purchase the Ford Motorcraft kit #SW-6991, the instructions are incorrect. Omit station 2 instead of 1 in step 2 and step 4. Also, skip steps 9, 11-15. The use of calipers are exact when determining the cut depth for the key code as well as for identifying the station number. When installing the tumblers, tilt the tumbler toward the tumbler spring and slightly compress the spring as its inserted. This will help it seat more easily.
@lstint233
6 ай бұрын
Thanks for sharing.! Great video. 🔑 I need to do this soon on my 2012 F150.
@louo5573
2 жыл бұрын
Good job. Thanks for taking the time to share this with us. It helped me.
@lstint233
6 ай бұрын
I got 'er done. ! But on the Motorcraft cylinder kit, my tumblers did Not slide in with the springs easy or at all, until I filed the small teeth on bottom of All of them. The teeth grabbed the spring bottom stopping then insertion. Filed, Then easy going on this project. You'll see small teeth on spring side. Thanks for this Info on doing this procedure.
@Skidroetahoe
6 ай бұрын
Very well done!
@MultiSmitty11
2 жыл бұрын
This is a great video by the way. I have the opposite problem with my Ford. I get the door chime (and other electronics stay on which kills the battery) even after I remove my key. I’m wondering if this will fix my issue as well.
@Anthony_Gutierrez
Жыл бұрын
Did it fix your issue? I have the same problem
@glennwild1183
Жыл бұрын
This was super helpful. Thanks
@mex20oax
Жыл бұрын
Awesome video… thank you kindly
@texless69
5 ай бұрын
Way too much trouble. I just zip tied old key to the plug in responder and hid it under dash. New key and ignition work perfectly. My car is 21 years old and i've gotten more than enough life out of it. If someone steals it, oh! well They can fix the other issues soon to come.
@JeffMageesr82
4 жыл бұрын
Does the Ford one come with the tool to separate the tumblers
@joshuabarr6511
4 ай бұрын
What to do if the cylinder is stuck in run? I cant get it down to accessory mode
@citylockapolytechnikeyllcc7936
2 жыл бұрын
Dorman is of questionable quality. I have had some of their stuff that is ok, and other that was horrible. Locksmiths will carry the OEM or a quality aftermarket replacement that can be coded to match properly. Always have a locksmith cut fresh keys by CODE, as the issue with these locks often is from worn keys, contributing to a seized lock. DEALERS generally only can deal with 8-10 year old or newer vin numbers for a key code. Dealer ones are also ok, but for a long time, they were selling a poor version, and once exhausted, they switched to an improved design. Locksmiths typically will decode the worn key, then input the result in a database of Ford codes to verify that it is a valid bitting, and to supply the real code number to client. A BIG WIN for the consumer.
@GeneralPeterGriffin
3 жыл бұрын
Very helpful Thank you
@mrstl3000
2 ай бұрын
Can i call dealership to get key code or do i have to bring car in
@ashleydumond6714
Жыл бұрын
I cannot turn my key at all any tips or ideas so I can replace it would be awesome
@nathanziegler2359
6 ай бұрын
Best video
@stevenmiller3691
2 жыл бұрын
I need to know the same thing about a 1999 ford exposition If you would please show me how to change my ignition it would be great
@sdrake74
2 жыл бұрын
subscribed !!!!
@KoryDouet-vh1fz
Жыл бұрын
Anybody know how to do this without the key turned? Mines frozen up and doesn’t turn
@TheTRUESNEAKERHEAD
2 жыл бұрын
Must be different for Mustangs
@TheTRUESNEAKERHEAD
2 жыл бұрын
Can’t find my code
@frankjerseytomato8941
4 жыл бұрын
i cant even image that it worked
@abrahamm3857
3 жыл бұрын
Does the chart come with the motor craft cylinderlock?
@ilovemyevo556
3 жыл бұрын
leave the pins out.. any key will work but no one will know but you lol
@citylockapolytechnikeyllcc7936
2 жыл бұрын
That is step one to trashing out your vehicle. No catalytic converter, a milk crate for a passenger seat, vice grips as window cranks, rear differential full of sawdust to quiet it down, wood screws in the battery terminals, and a broken broomstick as a hood prop! lol
@davidgreid007
2 жыл бұрын
I agree the chip is the proof enough
@KoryDouet-vh1fz
Жыл бұрын
Anybody know how to do this without the key turned? Mines frozen up and doesn’t turn
Пікірлер: 40