Great video, but I wanted to share something VERY important. Feel free to pin this post if you agree. The reason the fuel line with the black fittings wouldn't come off is because the line was under pressure. That is a Norma NORMAQUICK S 90 connector. They are designed to NOT release when there is pressure in the line. So you need to pull the fuse for the fuel pump, run the car until it dies to release the pressure. Then that connector will come off as easily as the blue one. The reason I think it's very important is if you break that connector, it could mean replacing the entire pipe to the fuel filter which means you may have to drop the tank a bit to get in there, which on an AWD car is a pain and might even involve dropping the rear subframe. All for a cheap plastic fitting.
@AutosportMore
Жыл бұрын
Fuse 28.
@arturo74r
Жыл бұрын
Great tutorial. For anyone wanting to do this, save yourself a mess. Do this with a nearly empty tank
@Killawife
3 ай бұрын
I liked that this video shows that other people are just as much of a mess when working on their cars as I am, lol! Thanks bro
@stevenbean9706
Жыл бұрын
never had a vehicle with so much go wrong all the time as an audi
@tedk4605
2 жыл бұрын
That open port is for the gas heater. It was an optional add-on feature with some of the european models.
@gigel99324
Жыл бұрын
You mean northern countries. And it's an auxiliary heater/webasto
@mark.r8900
Жыл бұрын
Hi, there's also a cap on the driver side. What's there? Thanks
@Idunno195
Жыл бұрын
What fuel pump did u use? My Audi needs a new one but I don’t know which fuel pump would work the best because I want to make sure the new one is literally identical with the oem
@oceang60smith38
Жыл бұрын
Do you have to do an adaptation for a low pressure fuel pump install?
@izzpeso
Жыл бұрын
Should I disconnect the negative battery terminal before I start ?
@YOARTHFU
Жыл бұрын
definitely! the pump gets activated, if you accidentally open the driver side door.
@gigel99324
Жыл бұрын
You shouldn't smack the metal ring with a metal screwdriver because of sparks.
@carlosemmanuelgarciabrito791
Жыл бұрын
Should the pump have continuity between the leads and the pump housing ?
@daviddelatorre6778
Жыл бұрын
Hello, I have code p0089 and I’m having lean conditions in my 2006 Audi a4. Do you thing the fuel pump could be the reason?
@AnthonySantiago
2 жыл бұрын
What are the pliers that you used? Do you have a link? or URL?
@xtc___3027
Жыл бұрын
fuel line pliers
@hamzajanooo6861
Күн бұрын
Cant finde fuel data in other obd apps
@mirainikki7681
10 ай бұрын
What would happen if you were to leave the one open port opened vs sealing it?
@AutosportMore
Жыл бұрын
did you have an error code ? P310b ?
@WAITTTDEH
Жыл бұрын
Also Misfiring started occurring straight after on idle??
@r3concept801
Жыл бұрын
How much the pressure should be normal
@jessetaumata8879
Жыл бұрын
What's the app called?
@living9377
Жыл бұрын
OBD 11
@jessetaumata8879
Жыл бұрын
How would I drain the fuel system in my audi allroad 2002? Ive Put the wrong fuel in and need to drain in all out. Can someone help please!!??
@natjohn3658
Жыл бұрын
I just had this problem I had to enter the fuel tank through the fuel pump sender and siphon it out
@jessetaumata8879
Жыл бұрын
Ye bro thank you. Apparently there's 2 different chambers. Did you manage to get them both empty with this method?
Пікірлер: 28