Jackpot video on gear repair!!! Truly appreciated! Love and subscribed!
@EbikeRepairs
7 ай бұрын
Awesome! Thank you!
@E-Guy
Жыл бұрын
Doing this in the coming week , very helpful thanks
@EbikeRepairs
10 ай бұрын
Best of luck!
@mogsog
3 ай бұрын
Excellent video, thank you for showing us. My mum has a bafang motor like this on a budget ebike and it needs a new rim now. I intend to service it using this video as reference and will inspect the gears.
@EbikeRepairs
3 ай бұрын
Lovel stuff. Glad to be of help!
@stanfordm950
9 ай бұрын
What a fantastic guide was really interesting.. Definitely gives me the confidence to try and repair my BAFANG hub motor.. 👍👍👍
@EbikeRepairs
8 ай бұрын
Glad it helped
@elisabethengel3789
2 ай бұрын
Thanks, very good explanation!
@EbikeRepairs
2 ай бұрын
Glad it was helpful!
@mark2207
8 ай бұрын
Great video!
@EbikeRepairs
8 ай бұрын
Glad you enjoyed it
@rosendorx77
8 ай бұрын
wow dont look that hard, looks like i am going to try to fix myself now. thank you so much for this video
@EbikeRepairs
8 ай бұрын
Glad it helped
@Steveshappylittletrees
Ай бұрын
Excellent content 👍
@EbikeRepairs
27 күн бұрын
Glad you think so!
@nathanafi
Ай бұрын
Amazing video. Thank you so much. Did it today and bike sounds like butter again. Btw....holy F$#K was it hard to get the old planetary gear structure out with just my toolbox... When I finally flung it above my head after 30ish minutes of prying with various combinations of tools, I threw my hands to the sky in celebration 😆😆
@EbikeRepairs
27 күн бұрын
Ooh I'm glad it helped! Thanks
@greetjenoppert5585
Ай бұрын
looking for a new bafang motor like this .. all I can find is the bigger size onces sofar .. Gears look fine in mine (engine makes noise). Anyhow .. enjoyed watching you work on this!
@EbikeRepairs
Ай бұрын
Try greenbikekit or bmsbattery
@greetjenoppert5585
Ай бұрын
@@EbikeRepairs there's one on its way to me, via bike shop in holland
@nathanafi
Ай бұрын
@Ebike Repairs Question for you... if I installed the new planetary gear part without using dielectric grease, how bad is that? Have I drastically shortened the life of the new planetary gears? A tiny bottle of dielectric grease here in Toronto is $16 for a tiny tiny bottle.... so I basically wondered if it was just cheaper to install new planetary gears each time instead of spending the additional money on the grease each time as well. What do you think? (Was also worried to use grease at all because unlike the top of your motor, mine has three holes that allow you to see into the internals of the motor. Though I understand this is the reason why you specifically need 'dielectric' grease)
@EbikeRepairs
27 күн бұрын
Just a spoon full is enough, but it really does want some! Try ordering from eBay or similar
@roslee7
3 ай бұрын
Any advice on planetary gear? Is metal better than the nylon ?
@EbikeRepairs
2 ай бұрын
Stay with nylon unless running crazy high power, then the gears wear out not the motor components themselves
@jamesbrown5262
23 күн бұрын
I have a apais a6 cargo bike and took it out in the rain. I now have loud grinding sound and sometimes delay in motor when breaking and pedaling/throttle again. Its intermittent like 1-2 minutes on my 9 mile commute. What do you suggest I do? deal with it, open it up and clean out and regrease? It only has 230miles on it.
@EbikeRepairs
23 күн бұрын
Sounds like a plan to me, maybe it's full of water and messing up the sensors
@simplexicated
2 ай бұрын
Do people replace the larger sealed bearings on the axel too which press fit into the casing? I can find no videos of this process being done.
@EbikeRepairs
2 ай бұрын
I have done it in my horror story BAFANG motor videos I think 👍
@JCisJD
3 ай бұрын
Those shims seem really important as ive put my motor back in and it doesn't move or is really stiff, im assuming that is because its catching, i just don't remember seeing any shimms hmmm , bearings seem ok . If i loosen the srews to the housing it turns so im assuming its touching without the shimms . Looking on line amd carnt seem to buy anything specific..any suggestions?
@EbikeRepairs
3 ай бұрын
Hmm, perhaps just machine down a washer to fit, washer + block of wood + belt sander + extreme caution?
@LePetitHack3r
19 күн бұрын
Hi friend, thank you for this video, I'm trying to know how to change the gears because there are no circlips on the axle like other motors?
@EbikeRepairs
17 күн бұрын
maybe press fit, use 3 jaw puller perhaps
@tonyhart3846
3 ай бұрын
Hi, I have a Halfords Carrera e-bike and the three gears have stripped in the motor (Sr Suntour). I can't find any replacement gears of the size I need - 45mm diameter 32 tooth. would you know where I can get a set? Thanks, Tony.
@EbikeRepairs
2 ай бұрын
Unfortunately they're not available outside buying a new motor from Halfords it would seem, sorry!
@GBPaddling
9 ай бұрын
The gears on mine are fine, but are in contact with the alloy casing there @8.21secs and causing resistance when pulling the bike backwards, and also making a noise when under load? Any ideas on how to cure that?
@EbikeRepairs
9 ай бұрын
I'm not sure, sometimes there are shims or washers or lock rings in place, if someone opened your motor up before and lost them, it might explain it!
@GBPaddling
9 ай бұрын
@@EbikeRepairs Yes, I had a hall sensor replaced, took it back to him and he's shimmed it out, but the reason I took it back is because it makes a grating noise when the thumb throttle is applied. As the speed pocks up, the grating dies off, seems like the clutch?
@EbikeRepairs
9 ай бұрын
@@GBPaddling could be anything! Loose magnets even...
@dogit1840
3 ай бұрын
It looks like the gear the planetary gears fit into in the outer wheel Bell I'm not going to try it but it looks like it's replaceable. mine seems to be made out of plastic nylon
@EbikeRepairs
2 ай бұрын
Yes they are normally nylon gears
@jasoncashmore6675
4 ай бұрын
Just wondering do clutches fail? & if so how do you tell?
@EbikeRepairs
4 ай бұрын
They do. Motor will free spin both ways so you'll get no drive, or it won't freewheel so you'll get high resistance when pedalling without assistance.
@beaterbikechannel2538
2 ай бұрын
Excellent video. How much of this could be avoided by using better lube? I imagine the lubrication dept is a man with a bamboo stick hitting the workers if they use too much. It makes you want to strip yours down just to relube, but warranties.. British manufacturers are no better human resources wise, im a machinist, in sure managers go to the Khmer Rouge school of slavedriving
@EbikeRepairs
2 ай бұрын
Honestly, you don't need to cake it on, nylon gears need minimal lube, cleaning and regreasing every 3000 miles is probably your best option. Quality silicone lube
@jamieschilling886
Ай бұрын
Would you know witch gears I should buy for the Arial rider 1000 watt bafang .. I can't find any info. Thank you
@EbikeRepairs
Ай бұрын
Sorry I'm not sure! You'd have to email BAFANG directly to ask for technical info
@sebastiaanbarends
Ай бұрын
On the hub there's a parts number/code, I googled that and found multiple websites selling them. Maybe that'll work for you too.
@ricphilips3965
10 ай бұрын
Hey mate can I buy the gears from you once I find out today which ones I need
@EbikeRepairs
10 ай бұрын
Yes of course, get in touch 😸
@dogit1840
3 ай бұрын
I have the same problem my gears only had two half moons on two of the bearings the gears broke into 8 to 9 different pieces. Exact same motor but I don't have the spaces or the clip ring on the main shaft
@EbikeRepairs
2 ай бұрын
Maybe someone has been in there before!
@basilkey2949
6 ай бұрын
What is the ratio of the gear inside? If the wheel trues 2 rpm, What does the motor turn?
@EbikeRepairs
5 ай бұрын
Sorry I'm not sure :)
@tofanalexander
3 ай бұрын
Lithium grease is not good for nylon gears. It damages them. Silicone grease is optimal.
@EbikeRepairs
2 ай бұрын
Thanks! I usually do use silicone grease in my videos...
@cutenapusa666
7 ай бұрын
may I ask how many months or years will wear the gear?
@EbikeRepairs
7 ай бұрын
gears should last around 10,000 miles but some last over 50,000! all depends on how clean the motor is and how gentle one is with the power
@jbrey8427
26 күн бұрын
@@EbikeRepairs My Aniioki AQ177's 1000w rear hub motor apparently wore them out in about 1000 miles, 8 months. If I have to replace them, I'm putting metal gears in there.
@Shana_Fana87
4 ай бұрын
Where can I buy the nylon gears? The separate gears and the gears with the metal plate. I found some on Amazon but it says two months before they arrive. 😢
@EbikeRepairs
4 ай бұрын
Where are you based? If you're in the UK, shoot me an email I can help :)
@Shana_Fana87
4 ай бұрын
@@EbikeRepairs no I’m in the US. In Chicago, Illinois 😩😢
@EbikeRepairs
4 ай бұрын
Sorry I'm not sure... Try grin.ca
@BillBadMule123
8 ай бұрын
❤💯💢💥💫👍👍👍
@EbikeRepairs
8 ай бұрын
Thanks
@oOImpulseOo
2 ай бұрын
17:05 My stepfather calls them Jesus clips. He said they call them that because that's what you'll scream when they fly across the room.
@EbikeRepairs
2 ай бұрын
AVE calls them jeesless clips, I believe for the same reason!
@gauravjoshi9183
Жыл бұрын
What's the reason for gears stripping?
@EbikeRepairs
10 ай бұрын
i think just age and use. sometimes debris in motor
@centaurus2309
2 ай бұрын
I didn't see any of those shims when i took mine apart.
@EbikeRepairs
2 ай бұрын
Not all motors have them, if it's together and there's 0 play in the axis of the axle, you don't need them.
Жыл бұрын
Why didnt you use metal gears?
@E-Guy
Жыл бұрын
Might cause irreparable damage to the casing? I thought about this but woyluld ratger the nylon if they last a few thousand miles a turn
@EbikeRepairs
10 ай бұрын
metal gears can damage the motor, i just replace with nylon, often good for 3000-12000 miles!
@tswdev
9 ай бұрын
@@EbikeRepairs mine came new making this noise. I am in talks with the company to get the motor replaced. They already sent one, but sent the wrong one :/ Mine is a G62 (1000w) and they sent a G60 (750w)
@allensheppard3691
2 ай бұрын
nylon on purpose as a fail safe
@AH-st1my
4 ай бұрын
Blumin ole!
@EbikeRepairs
4 ай бұрын
❤️
@imspartacusss
12 күн бұрын
My motor gear is 30 teeth. And I cannot find 30 teeth on internet. Can I replace it with 36teeth? Or what can I do? :/ can someone help me?
@EbikeRepairs
6 күн бұрын
Unfortunately I don't know, sorry. There are 30 teeth gears available
@TadeuszTarka-so2dt
29 күн бұрын
Włącz tłumaczenie na inne języki, mnie interesuje język polski
@EbikeRepairs
27 күн бұрын
I'll look into that thanks
@AlainHubert
7 ай бұрын
These are Nylon gears and you've put WAY too much grease on there.
@EbikeRepairs
7 ай бұрын
Probably! It will only splurge out and not cause any issues aside from messy next time I have to clean it 👍 so not the worst issue... But I'd like the pot of grease to go for longer....
@user-dr8gp5vu1n
4 ай бұрын
अपना नंबर दीजिए मेरा मोटर खराब हो चुका है 24 वोल्टेज का है
Пікірлер: 90