Neal shows step-by-step how to replace the two oil seals in the lower unit of a 1979 Evinrude 9.9 HP outboard. It requires a special tool to drive out the seals and he makes one from a cheap screwdriver. He demonstrates a trick on how to remove the seal housing without a puller and how to easily fill the oil reservoir with a cheap pump from Walmart. 🔴 He also installed his grease seals differently than designed because of a groove worn on the prop shaft. You should examine this diagram (number 2) and install your seals in the proper orientation: www.boats.net/catalog/evinrud...
Good luck with our repair and good fishing!
🔴 Subscribe to our channel:
/ returningtobasics
#outboardlowerunit #lowerunitseals #replacinglowerunitseals #returningtobasics #thevickersgroup
All Rights Reserved. Returning to Basics - The Vickers Group, LLC
Copyright 2020-2022
Негізгі бет Replacing Lower Unit Seals 1979 Evinrude 9.9 HP Outboard
No video
Пікірлер: 61