Very well explained. SUPER JOB. I've an 09 Avalon, I'm sure the process is the probably the same because the mounts appears to be the same way.
@DIYDharma
Жыл бұрын
Thank you, Jose. You explained it very well. Thanks for providing all the details. I think I'll need to do this on my Lexus ES330 but will like change both passenger and driver.
@PhucNguyen-to9ob
Жыл бұрын
1
@eugenebatiste4249
6 ай бұрын
Excellent. GREAT Job explaining Jose
@jcrxp5904
8 ай бұрын
Perfectly explained! Well done, sir!
@elchanojose
7 ай бұрын
Hello! Thank you for taking your time to watch our video and for sharing that it was perfectly explained and well done. Take well care!
@Z14kt12timandjes1
2 жыл бұрын
You are a very good teacher. Thank you
@elchanojose
2 жыл бұрын
Hello Timothy! Saludos hank you for taking your time to watch our video and for sharing your experience with our video that this was well explained. Take well care Timothy!
@Star88701
2 жыл бұрын
Thank you Jose, this is exactly what I was looking for.
@oscargonzalez8518
Жыл бұрын
Hermano Jose,que tremendo video exactamente lo que buscaba,no soy mecanico pero te cuento que ya cambio muchas partes y no me puedo quejar pues me quedan muy bien y ya me estoy ahorrando un buen dinero.Amigo Jose muy lindo el video de paso es el primero que veo pero ya me suscribi.que Dios te llene de muchas bendiciones.
@elchanojose
Жыл бұрын
Hola Oscar! Muchas gracias por tomar tu tiempo para compartir de que nuestro vídeo fuera lo que ocupabas y recuerda de que tenemos mayoría de los vídeos en español y en inglés. Que bueno que todo lo que le haces a tu carro sea un ahorro y así aprendes y conoces tu carro. Saludos Oscar!
@anhpham8199
2 жыл бұрын
Thank you so much. Your explanation is awesome!
@elchanojose
2 жыл бұрын
Hello Anh! Thank you for sharing with us that our video was easy to understand and helpful. Take well care Anh!
@richardprokopczyk9255
Жыл бұрын
Thank you Jose you made my job very easy thank you so MUCH, GREAT VIDEO
@markfravert3571
2 жыл бұрын
You did great job! I really appreciate your video!
@toppo3667
8 ай бұрын
Very well done. Thank you!
@ginotorreto9135
2 жыл бұрын
Excellent video. You explained it very well and clear. Muy bien 👍🏻
@elchanojose
2 жыл бұрын
Hello Gino! Thank you for taking your time to watch our video and for sharing with us that our explanation was well done. Take well care Gino!
@ginotorreto9135
2 жыл бұрын
@@elchanojose El Chano Jose es mi maestro de mecanica 👍🏻🙌🏻
@RWarrior777
2 жыл бұрын
@@elchanojose does this help with a smoother ride? Thanks, nice video
@baskhuu2547
Жыл бұрын
Great video, thank you so much, my toyota camry 2009 motor mount bracket was broken. Which is leading to the broke my cv axle shaft. First of all i need to fix motor mounts bracket then do other things
@davidxiao8821
2 жыл бұрын
Thanks! Very helpful video.
@elchanojose
2 жыл бұрын
Hello David! Thank you for taking your time to watch our video and for sharing your comment that this video was helpful. Take well care David!
@juanbetancur727
10 ай бұрын
Thank you Jose.
@elchanojose
10 ай бұрын
Hello Juan! Thank you for watching our video. Take well care Juan!
@sharaggajera
2 жыл бұрын
Great video
@oxouk
Жыл бұрын
Great video. Thanks for sharing your knowledge.
@anthonyosu5904
Жыл бұрын
Awesome explanation
@enqiaofan
11 ай бұрын
thanks for your video
@scpcomm1215
Жыл бұрын
How are you able to determine which motor mounts is bad?
@sharaggajera
2 жыл бұрын
Why didn't you take out the stud while the mount was secured as you did in your other video of Left mount replacement to reduce Motor lifting? Reference Your's other Video is "How to replace transmission mount on you car Toyota Camry 2007-2012 (El Chano Jose) ". By the way both videos of Motor mounts replacement are so impressive. Thank you.
@elchanojose
2 жыл бұрын
Hello Sharad! Thank you for taking your time to watch our video and for sharing your opinion about the process of replacing the motor mount on this video. Sometimes one way may not work for the other mounts and other techniques may be needed. If this process was a little confusing, we apologize about that. Once again, Thank you for taking your time to watch and write your comment and take well care Sharad!
@kenscourtas-fitness3392
2 жыл бұрын
Very well done! Thank you for taking the time to make this!
@johnmonk3381
6 ай бұрын
Is it safer to also loosen the top nut of the transmission mount on the driver side as well? If you try to lift the engine from the passenger side, while the transmission mount nut is still tightly attached at the driver side, won't that cause damage to the transmission because the engine is attached to the transmission? I am afraid doing it like how you showed here will break some seals in the transmission and cause an oil leak? Also, would it be safer to lift both the engine and transmission at the same time after the top nuts of all bottom mounts have been loosened and the top mount removed as well? Thanks.
@mqm2788
7 ай бұрын
Hey Jose, I want to replace all of them by myself (engine and transmission mounts) but I noticed sometimes you need to loose other mounts to change the one you want So is there a sequence in changing them to make it easier for myself?
@elchanojose
7 ай бұрын
Hello! Before anything else, thank you for taking your time to watch our video and for this great question. If you are going to replace all lower 3 mounts and the top damper or dog bone as well, is going to take you a good full day to do it carefully. Plan for a full day to do this. This is how I would do all in one day. Start by taking the top damper one off. Then, lift your car and sit it on good string jack stands at the frame or where the subframe meets the chassis. Loosen the front motor mount and start by replacing the passenger side one first. Put the passenger new mount on and once that’s done, put the upper dog bone or damper on so the lower passenger mount and upper damper can help you guide and balance the engine for the other two mount replacement. Now that the passenger side mounts are replaced, nos loosen the driver side mount having the front mount loosen and lift your engine to take front mount out and driver side mount helping by been loose to help or allowing the engine to lift enough to pull front mount out and putting the new one in. Then line up front mount leaving to bolt loose but with a few threads in so the engine is guided as you doing this. Take driver side out. Put new mount in, and stat lowering the engine down slowly to see and feel for things to fall on perspective places. Once’s engine dropped and all looks line up, tighten all hardware and bolts and nuts to secure engine to car. Remember that you might have to maneuver the engine to put the mounts in, this is the tricky part because you are going to have car on jack stands and a floor jack to lift the engine to create the gap where the mounts have to come out. Be careful and take your time to do this. The engine is heavy and that is why you always want to have a motor mount completely attached to control the engine valance. Hope this info can be helpful and answers some of your questions. Take well care!
@mqm2788
7 ай бұрын
@@elchanojose thanks a lot
@incnerdette
Жыл бұрын
We need video how to replace front engine mount support for Aurion 2011, its different front Toyota Camry, none a single video in KZitem you may be the first one if you do it.
@gjergjqyra6282
2 жыл бұрын
Thank you for the video, it is a life saver. Do you happen to know the torque specs for all them mounts?
@johnstevens2604
Жыл бұрын
I have a Hanes manual that details the process, it does not provide torque specs but it does instruct to use vibration resistant thread locker on all bolts that have nuts. Get them as tight as you can, don't brake them (I broke one 🤦)
@roibrycker8897
10 ай бұрын
Yooo love the hat my man!
@-Chronic-MJ
2 жыл бұрын
Awesome video 😁
@elchanojose
Жыл бұрын
Hello Weed! Thank you for taking your time to watch our video and also for sharing that this video was helpful! Take well care Weed!
@daendijr
Жыл бұрын
Hola, saludos espero estes bien. Tienes algún vídeo para un Toyota camry le 2019 soporte del motor del frente? Como reemplazarlo?
@willistisdale4293
4 ай бұрын
Helpful
@codyfi9210
Жыл бұрын
Hi, can you help me here? When I lift it up the whole front side is lifting up instead of just the motor. What do I do?
@benjaminsmith9175
2 жыл бұрын
Nice job :) thank you
@benladin626
6 ай бұрын
Are the mounts the same for a 2005 toyota camry 4cyl.?
@ciusesnal4335
3 ай бұрын
❤
@elchanojose
3 ай бұрын
Hello! Thank you for taking your time to watch our video and for sharing that you love it as well. Take well care!
@juancamberosg.593
2 жыл бұрын
Para cambiar los 3 mounts de abajo tenemos que hacer uno por uno o se pueden hacer los 3 al mismo tiempo
@elchanojose
2 жыл бұрын
Hola Juan! Sería recomendado hacer uno por uno para que mantengas el motor aliviado y embancado. El soporte de enfrente sería el único que tienes que aflojar para cambiar los otros soportes así que si cambias los tres, deja el de enfrente para la última. Saludos Juan!
@juancamberosg.593
2 жыл бұрын
@@elchanojose entonces no necesito aflojar los dos del lado para cambiar el del frente? Qué tal el que esta arriba? Ese si lo quito para cambiar los 3?
@yjtan8861
Жыл бұрын
Can I get lift the engine from the transmission side in a similar fashion to when you changed the mount on the driver side? Thanks
@BradBrother
2 жыл бұрын
Looks like a pretty simple job
@elchanojose
2 жыл бұрын
Hello Brad! This job is not that hard. Just take your time and you are going to be ok. Take well care Brad!
@BradBrother
2 жыл бұрын
@@elchanojose Thank you!
@bob123281
5 ай бұрын
@@elchanojosecan u leave the top on one and just loosen the front mount or will it not work.
@MC-mh2ju
2 жыл бұрын
Lifting the motor/transmission doesn't damage/bend the exhaust?
@elchanojose
2 жыл бұрын
Hello M C! The amount of lift that we done to it to do this replacement does not damage or bend the exhaust pipe. That was a really good question. Take well care M C!
@bigbread9000000
Жыл бұрын
How did you know the mount was bad?
@elchanojose
Жыл бұрын
Hello Bread! The motor or engine a started hitting back and forth every time we put in on drive or reverse. Also, during driving it would make vibrations once it wold reach 50+ miles. Take well care Bread!
@dionjay92
2 жыл бұрын
good video thanks
@raypelletier9920
2 жыл бұрын
Thank You Sir.
@angelicaleal7180
2 жыл бұрын
Thank you!!😇
@bubba072
Жыл бұрын
Where did you get the replacement parts from?
@ashrafsiddiquee3190
3 жыл бұрын
Just subscribed the channel
@elchanojose
3 жыл бұрын
Hello Ashraf! Thank you so much for becoming part of our channel and for sharing that. We hope that our videos are helpful towards your future projects. Thank you once’s again and take well care Ashraf!
@jorgeaguilar157
3 жыл бұрын
Saludos
@cebeho
3 жыл бұрын
Replaced motor mount with Toyota original part my car is vibrating more on idle:(
@ashrafsiddiquee3190
3 жыл бұрын
Thankful saying that
@LaFlam3Gaming
Жыл бұрын
You smoke your Stogey anywhere
@raulgonzalezzepeda
2 жыл бұрын
Hola saludos Que medida son esos bolts??
@orlandosalazar1980
10 ай бұрын
En español!!!!!
@jesusroque7624
2 жыл бұрын
A espik pokitinglis pero muy Bien video
@bethguian2699
Жыл бұрын
😅😅😅😅😅😅😅😅😅😅
@professor_deebeats8886
Жыл бұрын
Great video
@elchanojose
Жыл бұрын
Hello Beast! Thank you for taking your time to watch our video and for taking your time to share that it was good. Take well care Beast!
@professor_deebeats8886
Жыл бұрын
@@elchanojose no problem I need somebody to change mine in Massachusetts I work too much to do it.
Пікірлер: 79