I swear, I've watched 4 different videos and they ALL showed that G35 failing at that exact same spot! Design flaw. Your video, out of 5 I've watched, shows the best close ups on the steps. Good job. You made the video like you were showing a friend--simple and clear. And you are the only person to remind to bleed the bleeder valve, too!
@CastellanosMotorSports
2 жыл бұрын
Interesting, & thank you! I do it because I remember being there too & just wishing they were like this haha
@VQsivic
2 жыл бұрын
I can confirm mines crack on the same spot. But I bought a aluminum radiator instead of the oem one.
@waylonsellars4398
Жыл бұрын
@@VQsivic ❤
@bw1841
Жыл бұрын
This job is definitely doable but I would not call it easy. Also you need to transfer over your 4 little rubber mounts to the new rad to keep it all tight.
@TatyanaFomin
2 ай бұрын
Thank you for making this easy and straight forward and condensed it into a nice n short nutshell of a video :) This is def by far the best video out there on this subject ; & I've seen em all. Thanks and well done!!! 👏
@CastellanosMotorSports
2 ай бұрын
My pleasure!
@Iam_Adonis
3 жыл бұрын
These next few steps will allow you to have little to no air to bleed/purge after filling coolant.... 1- It's best to unscrew(phillips) the bleeder valve totally off before re-filling the coolant. 2- Slowly fill in coolant and keep an eye on the bleeder valve. 3- As soon as you see coolant coming out of the valve stop filling and replace the screw for the bleeder valve and tighten till it just snug (don't over tighten, you'll strip or break plastic screw) 4- Keep fill nozzle in radiator and now start the bleeding process with heater on and revving engine for about 10-15 seconds 5- Squeeze top radiator hose a few times, this helps release any air trapped in system(wear gloves, hose will be pretty warm) You'll see coolant level going down as air escapes so just refill till top 6- Repeat 4 and 5 till the thermostat opens(you'll know it's open when bottom radiator hose is just as hot as the top And mozzarella! You're done! I know this was a year ago but hope it helps anyone watching in the future. And nice job on the video guys! Cheers!
@coltensamir7687
3 жыл бұрын
I guess it is pretty off topic but does anybody know of a good place to stream newly released series online?
@adonislance6485
3 жыл бұрын
@Colten Samir Flixportal xD
@sparkspeedshop8320
2 жыл бұрын
The only step I would add is to jack the car up as high as possible on the front end
@adamstephens1548
Жыл бұрын
Does the car need to be running
@CastellanosMotorSports
Жыл бұрын
Soap2day
@GIOVANNITH3G35FAN
5 жыл бұрын
Alot of people forget about that bleeding valve lol like me. Great video man 👍👍
@CastellanosMotorSports
5 жыл бұрын
Thanks for the support I got a lot for y’all these upcoming weeks 👌👌👌
@stephonharrison7141
4 жыл бұрын
Gj
@Jap_station
4 жыл бұрын
Thanks so much u have no idea how much this video helped me u guys are awesome ps it was hell getting the radiator back in without help lol
@CastellanosMotorSports
4 жыл бұрын
You're welcome glad to help and dam I bet
@pacman209er
4 жыл бұрын
Good video straight to the point thanks bro.👍👍
@CastellanosMotorSports
4 жыл бұрын
Jose Alfaro you’re welcome man, nice G 👌😍
@brandonbelstad6450
3 жыл бұрын
Nice video, straight forward!
@CastellanosMotorSports
3 жыл бұрын
Thx bud
@MoNeYMoRriSoN
4 жыл бұрын
Great video an detail
@CastellanosMotorSports
4 жыл бұрын
Thank you 🙏
@nealcarr4200
9 ай бұрын
Did u have to take the plastic shield under the car off to get to the bottom hose
@CastellanosMotorSports
8 ай бұрын
No
@TurnTheStoveOnBlaze
4 жыл бұрын
Good shit. When we unscrew the bleeder valve does the car have to be running?
@CastellanosMotorSports
4 жыл бұрын
Yes
@tedhu9033
10 ай бұрын
Hey bro, thx for the video
@Sm0knn
Жыл бұрын
I did the new rad and my trans is kinda slipping after going for first drive…. Replace that fluid boys.
@CastellanosMotorSports
Жыл бұрын
Top it off it should be okay!
@nasier2000
2 жыл бұрын
so when i tried to take my radiator out it was basically connected to metal tubes on the drivers side. I have a 2006 sedan btw. The radiator i brought said it would fit this but i’m stuck on getting the actual radiator out any suggestions?
@CastellanosMotorSports
2 жыл бұрын
Is there anything connecting it to the fan? Maybe some clips
@BSlimeSlots
4 жыл бұрын
Show us how to change a Water Pump. Or thermostat
@CastellanosMotorSports
4 жыл бұрын
Both of mine don’t need replacement, if they go out I will fasho tho 👌
@nasier2000
2 жыл бұрын
complementing if i should just take it to the shop or save money and try this myself
@nasier2000
2 жыл бұрын
i flushed my radiator fluid and next thing i know i supposedly need to replace the whole radiator. i feel like i messed it up smh 🤦🏽♂️😭
@CastellanosMotorSports
2 жыл бұрын
I would give this a try, it wasn’t too hard. Worst case scenario you can’t get it & you get it installed
@nasier2000
2 жыл бұрын
@@CastellanosMotorSports you’re right ! ima give it a try
@CastellanosMotorSports
2 жыл бұрын
@@nasier2000 you got this!
@camquach8087
Жыл бұрын
I want to know how the transmission oil do I need to refill because when you take off the radiator they have two small valves is transmission oil right can you tell about that
@CastellanosMotorSports
Жыл бұрын
I was okay just check the dipstick , it’s right behind the engine
@flybaby4081
Жыл бұрын
Thank you
@CastellanosMotorSports
Жыл бұрын
You are welcome!
@Hardstyler981
Жыл бұрын
I unpluged the small hoses on the bottom and it seem like transmission fluid poured out i put it back in just in case
@tedhu9033
10 ай бұрын
BTW, where did you get the radiator? And how much?..thx
@CastellanosMotorSports
6 ай бұрын
eBay!! It was under $100
@donnytatro7224
3 жыл бұрын
Great job mate!
@CastellanosMotorSports
3 жыл бұрын
Thx’
@DonnieBling-bd4ym
Жыл бұрын
I can not get them dame wire harness clips off for shit ..😅 how do they work I can't find the unclipping part on them..
@CastellanosMotorSports
Жыл бұрын
It should be a little button try using a flathead screwdriver to push it
@CastellanosMotorSports
Жыл бұрын
You can also use the screwdriver to pry it off gently
@toshibavoodoo
4 жыл бұрын
Great. Thanks.
@LuisMartinez-nv3wc
3 жыл бұрын
Will the bleeding cause my car to get hot ?
@CastellanosMotorSports
3 жыл бұрын
Yes it’s supposed to
@n54anaya79
3 жыл бұрын
Nice!
@CastellanosMotorSports
3 жыл бұрын
Thx!
@juangalvan3128
Жыл бұрын
Do these replacement come with the drain plug. I’m changing mine since my drain plug broke and can’t find one that fits.
@CastellanosMotorSports
Жыл бұрын
Do you mean the part the hose connects to?
@juangalvan3128
Жыл бұрын
@@CastellanosMotorSports No, the drain plug is at the both right corner of it . Just wondering if the plug comes with it. It’s where the coolant comes out if you wanna even drain and clean your coolant
@CastellanosMotorSports
Жыл бұрын
@@juangalvan3128 they have the stock drain plug on concept z performance for $13 check it out
@pabloreyes2462
4 жыл бұрын
I pulled out a hose from the bottom is it trans fluid or power steering?!?!
@RyanTaylor-pi8gq
3 жыл бұрын
trans fluid.
@endmyanxiety6495
4 жыл бұрын
Great video bro
@CastellanosMotorSports
4 жыл бұрын
Thanks bro appreciate it!
@911Estyle
3 жыл бұрын
Mine blew up smh great video.
@CastellanosMotorSports
3 жыл бұрын
Sorry to hear that man how does that even happen? 😂 Lol & thx appreciate it bro 🙌
@911Estyle
3 жыл бұрын
@@CastellanosMotorSports no clue man I've had two g35 prior to this one and never had any issues. But this 03 has been giving me trouble. But I got a new radiator comming in.
@CastellanosMotorSports
3 жыл бұрын
@@911Estyle That’s crazy & nice man you’ll be slidin in it soon 😎
@911Estyle
3 жыл бұрын
@@CastellanosMotorSports question bro I replaced it but it still over heats. It broke my heater valve bleed pressure release. Even when I let the air out.
@360wave1
4 жыл бұрын
Great video 💯🔥🙌🏾
@CastellanosMotorSports
4 жыл бұрын
Thank you 🙏🙏
@CastellanosMotorSports
4 жыл бұрын
Thank you 🙏🙏
@3cinco76
3 жыл бұрын
I have 07 g35 I did a coolant flush after purchasing the car & did the bleed but the car overheats when the ac is on I was told it could be bleeded wrong or the radiator is dirty ?
@CastellanosMotorSports
3 жыл бұрын
I would check the radiator or rebleed it
@bw1841
Жыл бұрын
Electric Fans might not be turning on
@pootershnitzel
3 жыл бұрын
Did you need to refill your trans fluid from removing the trans lines?
@RyanTaylor-pi8gq
3 жыл бұрын
yes
@2Djeterss2
2 жыл бұрын
Need your help, is the AC lines connected to the stock radiator in any way to keep u from replacing it? I ask cause i went to the JunkYard to find a decent replacement cause mine is leaking. I noticed AC lines connected to it which kept me from removing it. Was i missing something u didn't show in video?
@CastellanosMotorSports
2 жыл бұрын
I just pushed the ac lines out of the way as much as I could
@bw1841
Жыл бұрын
The condenser has tabs at the bottom that sit in plastic shelves of the radiator. It's honestly not very easy to get the condenser tabs up out of the slots, neither unit wants to move up or down much. You must separate the two to remove the radiator.
@911Estyle
3 жыл бұрын
My 03 don't have the small hoses in the bottom ?
@CastellanosMotorSports
2 жыл бұрын
You can buy it from Z1 Motorsports
@deadscience_
3 жыл бұрын
Hey man the ac condenser gets in my way while installing the mishimoto radiator any pointers ?
@CastellanosMotorSports
3 жыл бұрын
Just try to move it as much as you can
@isaacmagallanes12
Жыл бұрын
How much fluid, the whole gallon??
@nicoblaytherealflamingo445
4 жыл бұрын
Thinking about taking mine into shop for a $400 job.
@CastellanosMotorSports
4 жыл бұрын
nico B wasnt too hard!
@nicoblaytherealflamingo445
4 жыл бұрын
Is 90 bucks too much for a camshaft sensor?
@CastellanosMotorSports
4 жыл бұрын
Hell yea 😂
@nicoblaytherealflamingo445
4 жыл бұрын
@@CastellanosMotorSports shot, they want 120 amd 120 for labor. Should I call them out for price gouging for a 20 min job
@CastellanosMotorSports
4 жыл бұрын
Way too much. Watch my DIY video on it It’s not too hard
@djgblaze1of1
4 жыл бұрын
Thankyou
@CastellanosMotorSports
4 жыл бұрын
You’re welcome 🙌🏽
@djgblaze1of1
4 жыл бұрын
A.C Production valve gaskets next
@CobHes
4 жыл бұрын
Ive read stuff about losing some AT fluid during the process of replacing the radiator. Did you have to do anything about that or no??
@CastellanosMotorSports
4 жыл бұрын
Didn’t do any of that and it runs just fine 🤷♂️
@CobHes
4 жыл бұрын
A.C Production hmm okay. That’s only thing that scares me. I’ve seen say that the 5at has a trans cooler on it and will have to plug it up or fill some at fluid. I just have a base model sedan so hopefully it’s just simple as yours was
@bryanpanyara9135
4 жыл бұрын
@@CobHes when you go to unplug your ac cooler lines and see atf coming out, use a aluminum tray or whatever you have on hand to catch the fluid, measure how much and then top off what you loss (with the right atf) or you can do a full flush on your atf
@ygfromig
3 жыл бұрын
what are those purple sockets?🔥
@CastellanosMotorSports
3 жыл бұрын
They’re my bro’s haha
@madmarlone
Жыл бұрын
Will bleeding work even if my ac is stuck on auto ac? Lol.
@CastellanosMotorSports
Жыл бұрын
It should just put it on hot
@fernandocarrillo9900
3 жыл бұрын
what’s the radiator you used in this video broskie?
@CastellanosMotorSports
3 жыл бұрын
eBay radiator
@DTUFINOPhotography
2 жыл бұрын
Need to do this for my FX35, so you have your transmission line connected to the radiator, if so, how much fluid did you lose and had to replace?
@CastellanosMotorSports
2 жыл бұрын
I didn’t replace any
@GBKICKS1
3 жыл бұрын
Where did u get the radiator
@CastellanosMotorSports
3 жыл бұрын
eBay!
@bigemarin9271
3 жыл бұрын
How do i take off the ac lines
@namegame2567
2 жыл бұрын
Lol I have the same exact leak
@stephonharrison7141
4 жыл бұрын
What year is this g35 your doing?
@CastellanosMotorSports
4 жыл бұрын
Stephon Harrison 2005
@stephonharrison7141
4 жыл бұрын
@@CastellanosMotorSports Okay, jw if it would be much different on a 07'
@CastellanosMotorSports
4 жыл бұрын
Stephon Harrison on a sedan yes, coupe mostly the same
@hujigguj2681
3 жыл бұрын
How much did the radiator cost
@CastellanosMotorSports
3 жыл бұрын
$50 on eBay
@65DK
2 жыл бұрын
@@CastellanosMotorSports link?
@35_moe73
4 жыл бұрын
Where did you get your radiator?
@CastellanosMotorSports
4 жыл бұрын
Got it on eBay, no problems with it so far ✔️
@35_moe73
4 жыл бұрын
A.C Production I just got mine installed yesterday, of ebay as well but I can see that my radiator is wet is that normal or ?
@CastellanosMotorSports
4 жыл бұрын
Mauricio Blanco Drive around for a little with the heater full blast if the car overheats or gets too hot it’s probably a leak, if not you’re probably fine just keep an eye on it 👍
@Genesis-rj1tl
Жыл бұрын
I don’t have a bleeder valve wtf
@CastellanosMotorSports
Жыл бұрын
Buy the metal one from z1 Motorsports!
@StartikSounds
3 жыл бұрын
Thanks for forgetting to tell people they might need to have tranny fluid on hand smh
@jbzay4804
4 жыл бұрын
What tools I need
@CastellanosMotorSports
4 жыл бұрын
Pliers, screwdriver, 10mm wrench/drill
@davidj3419
2 жыл бұрын
Bad video, they left out a very important detail! The two small hoses on the lower part of the radiator are for cooling transmission oil. If you disconnect them you will drain the transmission oil!!!
@CastellanosMotorSports
2 жыл бұрын
I’ve had no issues after this install
@ketobeast8489
2 жыл бұрын
@@CastellanosMotorSports Have you checked you trans fluid? You probably have none or are low if none came out lol
@bw1841
Жыл бұрын
They are easy to plug
@privateuser8232
4 жыл бұрын
shops be like : thats a 8 hour job youre looking at around 1800 bucks to replace it gotta change everything around it also....
@g35mario60
4 жыл бұрын
Lmao why did the shop tell me it was gonna be $1,000 plus 😂like smh ima go watch KZitem
@nardog7412
4 жыл бұрын
Is your g an auto or manual?
@CastellanosMotorSports
4 жыл бұрын
Glenford Fernando auto
@benjaminhospina
3 ай бұрын
Bm
@CastellanosMotorSports
3 ай бұрын
I’m currently making a video on an aluminum radiator, better than this oem style
Пікірлер: 145