The tomato Paste is so much cheaper than thermal Paste and works like a charm. My 3090 smells Nice.
@scrappq6712
2 ай бұрын
you guys are trolling right ?
@curtismariani6303
2 жыл бұрын
I change the pads on my 3090FE went from 104 deg c to 94 deg c. On the junction. The best part about it was my fan rpm dropped from max to under 1500 rpm which made the card loads quieter.
@CameronVanNatta
2 жыл бұрын
Ooooh where can I get that thermal paste! Looks… Italian?
@RealMenWorshipZeus
2 жыл бұрын
Can confirm. Have two 3090 FEs and changing the thermal pads made a HUGE difference.
@StariusPrime
9 ай бұрын
I see multiple size options for those Gelid pads. Do you remember which sizes you needed per card?
@RealMenWorshipZeus
9 ай бұрын
@@StariusPrime Hey, it's been awhile, so I'm not *totally* certain, but I think I bought the 120x120x 1.5mm. There was a template I printed from somewhere that I used to cut the pads to size. Wish I could remember exactly. Good luck!!🤞
@StariusPrime
9 ай бұрын
@@RealMenWorshipZeus Thanks!
@Skudderable
2 жыл бұрын
Have done this to my 3090FE and it has brought my temperatures right down, I think the plan from Nvidia was to slowly cook your cards so they would only last a few years and be forced to buy another card, Good marketing Nvidia.
@TheMRPHILLIPSTV
2 жыл бұрын
6:30 The part of the video when he is putting That Tomato paste on the GPU core Hilarious! lol🤣🤣
@The117th
2 жыл бұрын
So with the back while you dont have to, it is helpful to pad the entire back of the card wherever pads fit as A LOT of heat gets dumped back into the PCB as the Memory Dies are flip chip BGA meaning in essence the Memory dies are closer to the bottom of the memory package than the top dumping a lot of heat into the motherboard and not really able to conduct that much heat through the Memory package, by coating most of the back of the card with pads it lets you take a lot of the heat out of the PCB, cooler pcb cooler memory and also slightly cooler core temps too!
@IronwingTechHaven
2 жыл бұрын
People should really sue Nvidia or something. Nvidia should recall these. A company should not be able to get away with shipping a defective product like this
@StariusPrime
9 ай бұрын
I have two 3090 FE cards that have been largely unused, but I want to do this before I put them in a system. How many of each Gelid sheet did you need to purchase for a card? And what size? I see multiple size options on the amazon page.
@safolee
8 ай бұрын
Did you learn how much a 3090 needs ?
@meridian6042
2 жыл бұрын
The smell of pizza every time he games. Such bless much wow
@skashax777x
2 жыл бұрын
So Tomato Paste makes good thermal paste, Thanks, Bret Host; I'll remember that when I re-paste my CPU, or is this only good for GPUs? =P
@TheMRPHILLIPSTV
2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣
@totalbullion5882
2 жыл бұрын
It's pathetic Nvidia hasn't bothered to resolve this issue, an issue that's so easy to handle in manufacturing.
@Pro4TLZZ
2 жыл бұрын
Gotta over charge the gamers somehow
@chaniibak7702
2 жыл бұрын
@@343_GuiltySpark reread this pls
@bootchoo96
2 жыл бұрын
GDDR6X runs so hot, on my 3080 tuf oc when playing Dying light 2 ultra, it goes up to 95c...
@bootchoo96
2 жыл бұрын
@@wombat5252 back in December 2020, there were no Radeons available (released in November) While there were nvidia (released in September) For 1440p, 3080 looked better and with DLSS 2.0 (and shadowplay) Note : you can't compare GDDR6 vs GDDR6X anyway
@retributionn5100
2 жыл бұрын
How old is the GPU currently?
@huggarty5434
2 жыл бұрын
@@wombat5252 meh, 6800xt is only faster at 1440p, it mostly loses out at 4k. I'd take DLSS and RT anyway over a few more fps.
@bootchoo96
2 жыл бұрын
@@retributionn5100 bought in December 2020
@retributionn5100
2 жыл бұрын
@@bootchoo96 Its still under warranty?
@stevechiasson5086
2 жыл бұрын
I waterblocked my 3090 FE day 1. I got home, plugged it in and run some benchmarks. Pulled up HWInfo64 and said NOPE! Went to Microcenter and got a block, thermal grizzly and 12.3kw thermal pads. The 3090 should've been WAY better. I've since switched to a 6900XT on an EK block. It games at 30c on the die and 35c on the vram. Team red now I guess lol. Never thought id say that. It games and benchmarks way better than my 3090. The 90 is more of a 3d design\work station card.
@stevechiasson5086
2 жыл бұрын
@@ffwast funny story. I recently ditched the FE and waterblocked my 6900xt red devil. I like this card SO much better. faster clocks, more tuning options, plus it lays the benchmark smackdown on my 3090. Only upside to the 3090 i see is raytracing that I used maybe twice lol.
@angelmarauder5647
Жыл бұрын
doubt
@failomas1443
2 жыл бұрын
well a least you can do a good pasta now with the gpu you got already the salsa ready XD
@AnticipatedHedgehog
2 жыл бұрын
I thought it was a joke! I was like uh why are you using tomato paste??
@failomas1443
2 жыл бұрын
@@AnticipatedHedgehog it was for sure a joke
@3DJLab
2 жыл бұрын
Wild Thermalgrizzly Kryonaut package appears 7:31 , shame, should have used the tomato paste for real.
@lloydhillier945
2 жыл бұрын
Hey man, thanks for the tip. Just replaced the pads and paste on my 980ti. After turning it on and letting my PC warm up for a minute, I was welcomed with the smell of fresh baked pizza. After about 20 minutes, my PC made a loud "DING" sound and shut off, and won't start back up... But my biggest question is. Do you know where I go to pick up my pizza. Or since it's all digital do I need to download it to my phone 🤔🤣
@serpent035
2 жыл бұрын
Did he just put ketchup on the GPU?
@serpent035
2 жыл бұрын
@@obie224 sorry I'm such a noob
@AlejandroAlferez
2 жыл бұрын
Did you used tomato paste??? 🤯🤯🤯
@timotmon
2 жыл бұрын
Easiest mod ever but that LED light lead wire thing is a nightmare to get off without breaking.
@candidosilva7755
2 жыл бұрын
That painting with Nvidia c.e.o on the right holding an rtx was realy funy.
@tomdchi12
2 жыл бұрын
Italian chef's kiss for the cooling/sauce solution! Some red pepper flakes and you'd have a nice and spicy al Arrabiata cooler. (I assume that's a Producer's Choice overhead there. Sounds good!)
@frankunderbush
2 жыл бұрын
Those default thermal pads are a joke. It just looks like someone put goop on some bandages and cut them into strips.
@2009numan
2 жыл бұрын
what was that red thermal paste you used called
@42069memes
2 жыл бұрын
I wanted a 3080/3090 but heard about the vram cooling issues, probably just going to buy a 3070 so i dont have to replace thermal pads lmfao
@crisnmaryfam7344
2 жыл бұрын
my evga 3080 xc3 never gets anywhere near as hot as his 3090, Even After the new pads and stuff, and i have not opened mine at all. Its mostly a founders card thing. The majority of the AIB cards dont have this issue. Plus you can active back plates for them now, and that would be something you should feel comfortable installing.
@42069memes
2 жыл бұрын
@@crisnmaryfam7344 Have you checked vram/hotspot temps not just gpu temps? The issue seems very widespread, and its not that i dont feel comfortable installing thermal pads but gelid pads cost over $50 in my country and take months for shipping. I looked into active backplates and the 3080 cards do not have any memory chips on the backside so watercooling would be pointless, thanks for the suggestion though.
@dutchguy1975
2 жыл бұрын
Tomatopaste is so 2021, we all know it's peanutbutter in 2022 :P
@un1b4ll
2 жыл бұрын
This reminds me that I have all the parts to do this and I need to do it to my 3090. I'm going to stop putting it off. Tomorrow.
@Chemy.
2 жыл бұрын
Interesting tutorial of someone watching a tutorial lol well done man
@ph7947
2 жыл бұрын
it's broken? does it show black screen or no boot at all? check the different voltages might indicate what is broken.
@DashTheNightFury
Ай бұрын
How many of the two pads will I need to repad my RTX 3090 FE?
@ZSchrink
2 жыл бұрын
'body udders' Oh great, this is not something I want in my extended vocabulary..... Thanks for that 😁
@itsdeonlol
2 жыл бұрын
I'm surprised that NVIDIA can't even use decent thermal pads in their GPUs...
@Ascendor81
2 жыл бұрын
1:55 - Is one foot of the case hanging OFF the edge?
@UFDTech
2 жыл бұрын
Probably
@Synapticjr
3 ай бұрын
is this the same as the 3090ti? the thermal pad thickness
@djwhacked9228
Жыл бұрын
Try Harisha paste, for that extra spicey cooling down. Works even better.
@callmevil
2 жыл бұрын
That was a fun entertaining watch. THANKS!
@BanMeHarderDaddy
2 жыл бұрын
Hey man, what kind of program are you using to check the ACTUAL temperatures?
@NalinKhurb
2 жыл бұрын
HWiNFO
@thundolis
Жыл бұрын
Given the thermal pads they used are the same for teh VRM's as well . may as well do those too to avoid issues. Thermal pad "crush" is a thing, so critical pads like the VRM should be replaced as well. ALSO , consider a small fan to blow on the back side memory as well. since the back plate has ZERO fins and is made of .. something ..
@joemoss6005
2 жыл бұрын
Is there any reason im not getting any notifications for your videos and they aren't in my subscription section either?
@goldenheartOh
Ай бұрын
Makes me even more glad I skipped on the nvidia FE 3090TI for an Asus TUF 3090 vanilla. I saw a thermal pad replacment of an Asus & there was not much improvement.
@exlibrisas
2 жыл бұрын
Yup, now you are officially qualified to be a neuro surgeon.
@wadadli4sun
2 жыл бұрын
Home made dried tomato paste 🍅
@kevross3632
Жыл бұрын
where did u find the info on thermal pad thickness? I have an X3 but cant find the info anywhere
@vintelion
Жыл бұрын
Thanks. Now my VRAM is 10 degree idle, and 30 degree in Cyberpunk ultra 4K.
@lauretiu
2 жыл бұрын
ok, wth is that thermal paste? at first i thought it was a joke but turns out you actually did us that. Bret what is that ? dang it. i fell for the tomato paste, i hate you! 😆😅
@sparhawk1228
2 жыл бұрын
Nvidia charging a premium for their cards when they don't even put effort into the cooling for the memory. Typical greedy company.
@vanfly6731
2 жыл бұрын
that was pretty awesome thank you for the video
@jeffreybrown515
2 жыл бұрын
Maybe I’m having the same issue but i dont know mine is a evga 3060 but the screen goes black sometimes I bought it off of someone on fb and I’m starting to think he knew the problem….
@merica7139
Жыл бұрын
Does it void warranty?
@I86282
2 жыл бұрын
Scholar and a gentleman.! 👍👍
@Gripen90
2 жыл бұрын
Mutti thermalpaste that certainly looks interesting.
@fromheretothere6074
2 жыл бұрын
Can you fix my 3070? keeps acting like a 2060 :))
@NightOwlGames
2 жыл бұрын
i didnt just see that, no way would someone use ketchup as thermal paste on a 3090! nahhhhh must be lack of sleep or something i didnt see that!
@MonsterSound.Bradley
2 жыл бұрын
Verrrrrry nice job BrettHost. 😎👍
@chuka5558
2 жыл бұрын
Love the content ,Keep it up !
@sebaspi
2 жыл бұрын
It is really funk up when you got to buy the most expensive card only to have to fix it.
@shabazz717
10 ай бұрын
No issues out of the 3090ti. Must be fixed on the TI
@FordSierraIS
9 ай бұрын
doesnt this void the warranty?
@Etheoma
2 жыл бұрын
And he's comfortable having Bert touch it... alrighty then.
@fndrn8
10 ай бұрын
I bought the alienware r11 with a 3090. has anyone done this mod on that card?
@Bacchus15
2 жыл бұрын
All hail sonnemuz, i think!
@PhantomDyl
6 ай бұрын
Mine goes to 89c witch isnt as bad as this but its hot af
@PhunkBustA
2 жыл бұрын
this folks, is why i dont just jump on the "shutup and take my money" bandwagon also, wtf nvidia? how many more thousands of dollars you want??
@davecollins7600
2 жыл бұрын
Love your video's! After changing my pads on my 3090 FE memory temps went from 110C to 88C. I used Thermalright Odyssey pads on mine. And yes its mining Eth 24/7 in a closed tower case.
@shaddprice3671
2 жыл бұрын
Change all the stock pads.. the 1.5mm pads are much thicker then the stock pads. Tomato paste is not recommended! lol
@akumarus
2 жыл бұрын
No issues encountered with my 3090. Its beautiful card!
@miqotelover
Жыл бұрын
Did you mod it? Or just use as is? o.o
@JasonVeil
Жыл бұрын
Is it FE? Or 3rd party
@edgarzakarian1649
2 жыл бұрын
wasn't paying attention and honestly i really thought Brett was trolling and adding ketchup.
@edgarzakarian1649
2 жыл бұрын
tomato paste*
@parkersgarage4216
2 жыл бұрын
i have a 3080ti fe that i wanna do the same thing to.
@Mr_R00k
2 жыл бұрын
bro thats fucking tomato paste
@russellsprout93
2 жыл бұрын
Was the tomato paste a joke? Honest question
@murcanfrenchfry9721
2 жыл бұрын
Was that tomato paste?
@vladmihai306
2 жыл бұрын
this is unnecessary. the memories are designed to work at over 100 degr.
@763762russian
2 жыл бұрын
you should have did a copper mod
@djispro4272
2 жыл бұрын
You were kidding me with that paste, right?
@UFDTech
2 жыл бұрын
Was I?
@djispro4272
2 жыл бұрын
@@UFDTech Well, using tomato paste is a very temporary (preferably less than 3 hours to be used) alternative to thermal paste and I wouldn’t trust it being a long-term solution especially with such a high-power draw component such as the RTX 3090 which could dry the tomato paste very fast and also could make a VERY disgusting smell when it expires.
@judge1246
Жыл бұрын
What app you used to see the memory temp?
@grgeryhzat6780
Жыл бұрын
hwinfo
@JG-ti7id
2 жыл бұрын
asalwaystyforyourhardworkanddedication!!!
@Spookophonicstudios
Жыл бұрын
hopefully nothing like this happens with my new 4070 ti
@opinions551
2 жыл бұрын
was tomato really used can I'm about to do this
@guily6669
2 жыл бұрын
Who is not comfortable doing such basic thing shouldn't even be allowed to have a RTX3090 in 1st place 😁 (joking).
@4_ist403
2 жыл бұрын
I
@handsomemre
2 ай бұрын
its my 52th time watching still dont get why he used tomate paste
@zabique
Жыл бұрын
Watching this was like torture
@torentmonkey
2 жыл бұрын
Heh, I've seen the conductonaut syringe on the desk man, not cool. To ma to much better.
@JozieKS
2 жыл бұрын
What size thermal pads for 3080ti ?
@whohan779
2 жыл бұрын
That awkward moment when you watch 6:29 on April 1st and think "Epic troll, April foolz, amirite?" and then you realize this was more than 12 days before April 1st… 😳
@fredrik2008
2 жыл бұрын
1500 damn that's cheap, here they 2500 and up.
@_LazySama
2 жыл бұрын
thats a ketchup!
@seganintendo6578
2 жыл бұрын
How many pads do I need for the front and the back, thank you.
@tunnandaaung2
2 жыл бұрын
U don't even need to sponsor anker issoo cool btw for ios user and u don't wana buy 20w adapter just buy anker power adapter btw anoer power bank also great for ios :.)
@Gothmatix
2 жыл бұрын
If I send a graphics card then I want mine back with cheese!
@stenspeed1
2 жыл бұрын
So the point is never buy orginall card
@R3TR0J4N
2 жыл бұрын
that 3090 has now increase its price nwo that it got your DNA on it.
@sysghost
2 жыл бұрын
Tomato paste? 0o
@mickdanger
2 жыл бұрын
No static strap? tsk tsk tsk.
@jacobobos
2 жыл бұрын
Probably the best part of the video is putting ketchup on the GPU core
@JoeFay_Tech
2 жыл бұрын
Nvidia: Buy Now RTX 3090 With Extra Heat Nice And Crispy. 🤣
@DjDigitalGroove
8 ай бұрын
horrible as a tutorial for people actually wanting to do this at home. camera moverment was off the carts. Important close-ups were completely ignored. NEXT!!!
@yoobollo420
2 жыл бұрын
I need to change the thermal pads on my 3070 ti but im scared, feel like i might mess up
Пікірлер: 141