Tools you will need...
10 mm socket for removing the computer over the battery, the negative battery terminal connector, and the metal brace over the battery. An extension might be useful.
10mm open end wrench for the positive battery terminal and battery tie-down bolt. You could use a deep 10mm socket instead.
Flathead screwdriver for popping the 3 plastic clips holding the plastic trim.
Pliers might come in handy.
Parts...
Just incase you break some of the plastic clips for the trim: amzn.to/3qVV6qr
Disclaimer: All products used in this video were purchased by me and all video content is my own and has been edited by me, Matthew Fox.
Notes: Filmed using a Samsung WB250F, sound recorded with a Snowball Ice mic, and video edited with Davinci Resolve V16.2.8.005
Негізгі бет Replacing the battery on a 2015 Equinox
Пікірлер: 3