Four screws, throttle link off, top cover off, much easier.
@christopherpaulgrace5793
3 жыл бұрын
Put in new ciol in ts 400 consaw wire from saw is off and not sure what's it goes and no spark
@demc7
6 жыл бұрын
lethal saw! Would be awesome to see it chopping up some household items
@James-ul8yh
2 жыл бұрын
Part number for switch or linl plz
@erwinerwin1245
4 жыл бұрын
One wire is the kill wire. Now what doe the other wire do and can one start the chainsaw with both wires off the ignition coil
@FixitSam
4 жыл бұрын
Normally on small engines with magnetos one wire goes to magneto the other to the metal body of the engine. When the switch is closed it grounds the magneto which stops it sparking. With no wires connected it should run.
@erwinerwin1245
4 жыл бұрын
@@FixitSam Thanks kindly for your answer. I have no spark on my Stihl FS90 weed trimmer. I replaced the spark plug, the ignition coil and still nothing. I removed the black kill wire from the ignition coil and still nothing. Now I also metered the 2 wires from the switch and in my case a black kill switch and a blue wire. I understand when the switch is Off one should see like zero ohms and when the switch is On one should see like infinity, or no reading. In my case I always see infinity , On or Off so I was thinking my switch is defective and before I buy a new switch I was thinking that if I remove both wires should it still start and you said it should still start. Now I have not yet tried that as I type this. So really the switch is just a Kill switch and has nothing to do with connecting a circuit for the coil to work, other than to ground out the coil to stop the engine.
@FixitSam
4 жыл бұрын
@@erwinerwin1245 Yep, try with the switch unplugged.
@JosiahTNT
5 жыл бұрын
This was helpful! Thanks. Good job on keeping it clear and everything shown to the viewer
Пікірлер: 10