When I was rebuilding the top end on the RMZ I noticed some weird wear in one of the exhaust valve buckets. so I talked to the techs I work with and they said it looked like the hardened coating was defective. I then bought 2 exhaust and 2 Intake buckets in case the rest of the valve buckets were from the same batch. Suzuki wasn't going to have them in stock for 4 weeks so I put the bike back together making sure that it was shimmed properly so I could break in the new piston. I finally got the parts in so I decided to make a time laps of the install (GoPro battery died before reassembly) but I took pics with my phone.
The new valve buckets went in with no trouble and I shimmed them to spec.
Exhaust clearance: 0.007"-0.009"
Intake clearance: 0.004"-0.006"
Exhaust bucket part # 12891-35F00
Intake bucket part # 12891-47H10
Thankyou so much for watching!!!!
Please LIKE, SUBSCRIBE and hit the BELL BUTTON!!
All music is royalty free and copyright free!!
Негізгі бет Replacing valve buckets on RMZ 250 time laps!!!!!
No video
Пікірлер: 4