Danke für das tolle Video, nächte Woche ist mein Querlenker dran;)
@flo2go217
8 жыл бұрын
wie immer sehr gutes video ! mach weiter so ! Mit freundlichen Grüßen !
@tempest411
8 жыл бұрын
Thank you for another nice video:)
@alannunn1089
4 жыл бұрын
I wish I was close enough to you to get you to look after MY S2!! Unfortunately I'm in Shropshire, England. Vielen Danke ...
@irina25661
4 жыл бұрын
Hi. great idea, I should do a promotion tour in UK! Greetings, Jürgen
@alannunn1089
4 жыл бұрын
Oh yes!!
@MrRiouxc
6 жыл бұрын
Vielen Dank! From Quécec Canada.
@kl0br1ll3
8 жыл бұрын
Wieder mal Top Video. Viele Grüße aus Bayern !
@googleuser9720
3 жыл бұрын
Ich hatte mir die Traggelenke aus den USA mitgebracht, soweit ich mich erinnere warendas sogar verstärkte, der einbau war recht einfach, wenn man den Alulenker im Backofen auf 150 Grad erhitzt und das auf -20 Grad im Tiefkühlfach abkühlt geht das Gelenk fast wie von selbst in den Lenker.
@irina25661
3 жыл бұрын
Hallo, ich glaube bei dem Lenker im Video passen die Traggelenke nicht, er hat keinen Sicherungsring sondern ist verpresst. Viele Grüße, Jürgen
@DaytonCarCare
3 жыл бұрын
FYI: These are also the same on the 968 too ;)
@peterp6760
2 жыл бұрын
Hi Juergen, what was the part number for the new control arm? Thanks
@mandiho
8 жыл бұрын
Die beiden inneren Querlenkerlager sind gummigelagert und müssen deshalb im belasteten Zustand festgezuogen werden. Das heißt, erst vormontieren, dann das Auto auf die Rädern stellen und dann mit Drehmoment festziehen.
@robertwendlinger2692
4 жыл бұрын
Wenigstens einem ist das aufgefallen - sowas nennt man in Bayern "Zanglmechaniker"
@BryanWLepore
8 жыл бұрын
Just in time, Jürgen - danke schoen! Ummm - is that a new control arm from the Porsche gods?
@irina25661
8 жыл бұрын
+Bryan Lepore Hi Bryan, yes I bought a new wishbone from Porsche. Greetings, Jürgen
@BryanWLepore
8 жыл бұрын
+irina25661 let me assure you and any other readers - a brand new wishbone from Porsche is well worth it, compared to the alternatives ... There Is No Substitute.
@godwingrima6894
4 жыл бұрын
Hi Jurgen, I have watched a few of your videos and you are impressively meticulous. I wonder if you could help me with finding an alternative auxiliary water pump for a 1988 Porsche 944 Turbo. The factory pump is very expensive and I note that some Bosch pumps look very similar. Could you recommend one please ? Many thanks, Godwin
@irina25661
4 жыл бұрын
Hi, you mean the electric pump for the turbo. I think a friend managed once to repair it, you may try. If another pump could be used as replacement I don't know, but I think it should be possible, the function is simple and the connector could be adapted. Greetings Jürgen
@artmchugh5644
3 жыл бұрын
I have one !.let me know where to send it !!!!😄😄😄😄🇺🇸🇩🇪🍺🍺🍺🍺
@irina25661
2 жыл бұрын
Hi Godwin, funny, I'm have just a Turbo with the same problem here. The pump is leaking. What's the problem with your pump? I'll try to open it the next days. Greetings Jürgen
@BryanWLepore
8 жыл бұрын
A jack can help raise the front knuckle/strut/tie rod, as needed. I'm not sure if letting the knuckle hang is good for the associated components. the mount bolts look like self-tapping bolts - can't find these easily. Be careful to note - Jürgen marks the little tab on the eccentric bolt.
@petraschneider3614
4 жыл бұрын
Hallo, gibt es ein Video, indem du zeigst, wie man einen Reitstock justiert ?
@kunstmol
8 жыл бұрын
so there is no way to replace the balljoint? you have to replace the whole wishbone? it must be hard if Jurgen won't attempt it.
@irina25661
8 жыл бұрын
+Jake Hi, officially is no was to repair the wishbone. There are repair kits for the normal 944 aluminum wishbones, but I had a late wishbone from 1994, where the repair kit doesn't fits. The late wishones, mainly from the 968 (but they have the same ordering number at Porsche) cannot be opened without milling part of it away, the joint is pressed in the wishbone. I still have the wishbone, maybe once in winter time I'll try to open it. Greetings, Jürgen
@kunstmol
8 жыл бұрын
+irina25661 I have an 1987 944s. I guess the rebuild kit will work then, ja?
@irina25661
8 жыл бұрын
Hi, if the wishbone is still original the repair kit will fit. But I read some stories that the repair kits failed after a few thousand km. Greetings, Jürgen
Пікірлер: 31