Thank you. This was very useful. I thought I was the only one stuck with this old printer 😊
@303electronics
2 жыл бұрын
You are welcome! Thanks for sharing. Have a great day!
@palmas001
2 жыл бұрын
Man you saved me!!!!! I wasnt able to use the printer since i dont have the setup cartridges. Using this method i finally entered the config and find the "Trade OOBE" which allowed me to set up the printer without those cartridges. Thank you sir!
@pilarfuentecorona
8 ай бұрын
I can’t rest Printer I have ink system failure 0xc19a0020 and I can’t acces hidden menu, help please I need to use the scanner
@303electronics
8 ай бұрын
The video in this link addresses that issue. Good luck: kzitem.info/news/bejne/zoeX1aScnIh5jagsi=aru-_tj4BgV4tnAY
@rosavelazquez3249
2 жыл бұрын
How long should it take before it turns on again?
@patrickstack2926
2 жыл бұрын
Thanks for the video....
@survivormary1126
2 жыл бұрын
I have a b210e and that doesn't work at all. Do you have a video on how to set up the scan? I can't get this to connect at all :( It won't even copy.
@leandro3515
3 жыл бұрын
Hello! I have the same printer but with 0xc19a0003 error... with this error I can not access the menu.. I tried several things to clean the head ink, turn off and on.... have you seen this error? Thanks in advance.
@303electronics
3 жыл бұрын
Try pulling out the printhead and see if error goes away. If it does go away, you have a bad printhead. You can try cleaning the printhead and the area where the printhead goes, but usually it needs to be replaced. I'm sorry. The printhead removes by removing ink cartridges and lifting the gray or black tab on right of printhead.
@edithcardenascruz1680
Жыл бұрын
Me pasa lo mismo que hago😮
@edithcardenascruz1680
Жыл бұрын
Ya limpie el cabezal y funciono😊
@mynameisjeff512
3 жыл бұрын
Whenever I print, nothing prints. The page that comes out is blank white.
@303electronics
3 жыл бұрын
Hi. You may have empty or dry ink cartridges or a clogged printhead. see this video for help: kzitem.info/news/bejne/ra2O4J6imoOAn5g
@mynameisjeff512
3 жыл бұрын
@@303electronics I just bought the ink cartridges today
@apriljohnson421
4 ай бұрын
I have a blue light flashing and it will no longer connect to my wireless network…
@303electronics
4 ай бұрын
Have you tried to reset network settings? Go to printer menu, then settings, then network settings, reset to factory defaults.
@morrisonem
2 жыл бұрын
When I turn my B210a on, it automatically goes to "Used or counterfeit cartridges installed. Original HP ink depleted. OK". However, I hit ok and nothing happens--no response. There is still some yellow and black ink. How do I get out of this screen to reset it?
@303electronics
2 жыл бұрын
First try to remove printhead, clean contact area on printhead and inside the carrier. Turn printer off, then on and follow instructions to install printhead, close printer. Then install cartridges
Пікірлер: 19