www.StoneStron...
Whether your home is in a subdivision or in the country, Stone Strong retaining wall blocks provide a safe, reliable and long-lasting wall to easily fit into any landscape.
The base leveling pad is quickly excavated and filled with stone. Then, the contractor can start setting the base course, being sure to check level throughout the process. A level base course is one of the most important aspects of installing a block retaining wall.
To meet project schedule, Barger and Sons will work with the contractor and deliver the block to the jobsite. The standard 24 square foot face block weighs 6,000 pounds.
After the base course is set and level, the next course easily stacks using the built-in alignment loops with an automatic 4 inch setback for every 3 feet of vertical height. The bottom of the blocks have a notch to easily install a 4” drain pipe. Depending on the site conditions and access, the excavation can be performed all at once or in sections. This wall was stacked to a 9 foot height without the use of geogrid. This saved the homeowner in excavation and backfill. Using a Stone Strong wall allowed the homeowner to extend the backyard and increase usable outdoor space.
Stone Strong blocks have an internal void that is filled with stone during install. This addition of stone, increases the connection strength of the wall and acts as built-in internal drainage.
Prior to filling the block void with stone, PVC pipe fence sleeves are installed in the top course to allow for easy fence installation after the wall is complete.
The end of this Stone Strong wall was finished with corner block and topped with a white vinyl fence. Other fence types could include wrought iron, ornamental or chain link.
The top of the wall can be finished off to the front edge of the top block with dirt, grass, landscaping, mulch, concrete or other material.
Stone Strong block once again creates an aesthetic wall to stand the test of time.
Негізгі бет Residential Stone Strong Retaining Wall Construction
Пікірлер