I must have missed this video before. I never saw the open frame idea before, which is so great, because as a crafting junkie, I have a whole bunch of open frames that I bought at different times on clearance that I never have used. Now I am glad, because I have a whole list of great ideas for them. Thanks again Fran for your inspirational ideas and AWESOME products!!!
@lindamacpherson3068
Жыл бұрын
you did a very good job explaining how to do resin projets, thank you
@angieemm
4 жыл бұрын
I had a pretty hard time finding a video tutorial that explained how to use bezels. I'm making travel bracelets using some soil and/or tiny rocks from the places I've visited, and this explained exactly what I need to do. Thank you!
@UNDEADGYPZY
2 жыл бұрын
Ooooo... I love the blue glitter
@johnswimcat
2 жыл бұрын
Excellent video. The resin looks nice to work with too
@brooketucker7680
3 жыл бұрын
Excellant, calm and easy to follow. Thank you.
@sudhirpatil2870
4 жыл бұрын
I watched process with utmost "care n attention"- learnt a lot! Thx-
@janetlamping1017
5 жыл бұрын
I’m glad I found your tutorials! You explain it so well I finally think I can try it for myself! 🌟
@kathybray7156
Жыл бұрын
These are so beautiful
@green5sing
8 жыл бұрын
Great job showing all the different ways to use this wonderful resin! I love this resin!
@mariettlinger8965
Жыл бұрын
I’m just starting out with resin, and a bit hesitant. I’ve watched a bazillion videos, and think this is one of the very best I’ve seen, thank you so much! I’ll definitely be ordering from Little Windows
@LittleWindowsResin
Жыл бұрын
Wow, thank you Mari! There are lots more resin tutorials, close up photos, and a tons of inspiration in our IDEAS+HOW-TO's library, so check it out, and be sure to sign up for our e-newsletter as I'm about to announce some great new products :) www.little-windows.com/pages/new-project-ideas-and-how-tos fran@little-windows.com
@Whitney_Sews
8 жыл бұрын
Very cool ideas! I'm learning a lot :)
@nenanew589
3 жыл бұрын
Thank you very nice
@ladycaramela1
6 жыл бұрын
Im just getting into making jewelry,and learning about resin is just another notch I 've added to my jewelry making notes. And I like it. I thought it was going to be hard but Bravo! its not. /Thanks so much.
@LittleWindowsResin
6 жыл бұрын
You are very welcome Diane! Have lots of fun and please let me know how your makings turn out :) - Fran
@datsdatchik
5 жыл бұрын
Awesome video! Very informative, exactly what I was looking for
@LisasLifeThenandNow
2 жыл бұрын
I love these!!
@anna-nn4ix
6 жыл бұрын
excellent tutorial... beautiful designs. u r a wonderful teacher.
@LittleWindowsResin
5 жыл бұрын
Thank you Anna, I hope you're having lots of fun with resin!
@elizabethcarney1010
2 жыл бұрын
Love this technique to make jewelry.!
@LittleWindowsResin
2 жыл бұрын
Thank you Elizabeth! I think you'll love this newest tutorial as well, let me know what you think :) www.little-windows.com/blogs/project-center/resin-in-bezels-2-sizes-with-glow-in-the-dark-additives - Fran@little-windows.com
@vanessathenavigator
7 жыл бұрын
I just got my order today and I am SO EXCITED!!!!
@LittleWindowsResin
7 жыл бұрын
Excellent! Please send me a photo or two of your creations fran@little-windows.com Thank you :)
@OrignialLostintheFifthcorner
5 жыл бұрын
Thank you! This video answered a lot of questions other similar videos did not, troubleshooting etc.
@LittleWindowsResin
5 жыл бұрын
Thank you Heather, have fun making awesome stuff! - Fran
@HouseScraper
5 жыл бұрын
Oh my this is fun over load. Thank you for sharing
@millenialcommotion9543
5 жыл бұрын
what a great video. very informative :) thanks!!
@TheBlackbutterfly62
5 жыл бұрын
Great tutorial. Thank you. JuliAnn
@christopherjohnson1991
2 жыл бұрын
such a creative mind!
@LittleWindowsResin
2 жыл бұрын
Thank you! 😊
@stellabyrd6014
8 жыл бұрын
Loved this video. Can't wait to. Get started
@LittleWindowsResin
8 жыл бұрын
Thank you Stella! I hope you have lots of fun creating :)
@kitchenkhronicleswithk8014
7 жыл бұрын
LittleWindowsResin was just curious to know if you have tried resin that sets in 5 minutes
@jacynthetofcrazycreations4869
3 жыл бұрын
thank you.
@RBLACKPEARL7
6 жыл бұрын
I love these.
@erikaamerica4546
6 жыл бұрын
Great ideas
@shilpanimbaragi877
5 ай бұрын
Can you just add the photo directly? Or have to laminate it before?
@LittleWindowsResin
5 ай бұрын
Hello @shilpanimbaragi877! I don't need to seal them first because I've printed on Special Photo Paper for Resin. It's double-sided too, so you can use it in clever ways in open-back bezels too. Here's a link so you can check it out... www.little-windows.com/collections/special-papers Thanks for asking :) fran@little-windows.com
@alisoncoombswellness
5 жыл бұрын
Great tutorial! Learned so much. Are all the finished products waterproof? Or just water resistant? Thank you for all your insight 😀
@seanditch4419
5 жыл бұрын
Hi how do you avoid (watermarks??) on the photos edges when submerging them into the resin?
@sarahhedley1199
3 жыл бұрын
you can seal with modpodge for sure. I am not sure about clear nail varnish but I am going to try that as I dont want to pay for MP at this time.
@doranziegler2303
8 жыл бұрын
Very well made instructive videos. This series tells you just about every thing you need to know about making resin jewelry. The techniques shown lend themselves to endless creations and methods. (Just one negative in the narration - “these ones?” The word “these” is sufficient. The addition of the word “ones” makes it bad english.)
@LittleWindowsResin
8 жыл бұрын
Thanks so much Doran! If you'd like to subscribe to our e-newsletter, we send out video announcements along with project ideas, promotions and we also share what our amazing customers have been making. You can sign up at little-windows.com :)
@pamcarr4003
4 жыл бұрын
Wow! Thank you so much ! I'm way new to resining and loved th I s tutorial! Did you use a lighter or any heat to pop the bubbles? Just checking. Again thank you so much for your time and this tutorial! Pam
@AM-fr5gl
16 күн бұрын
Have you ever had the resin get inside the little hole at the top of the bezel (where the earring finding or chain should go through)? If so, is there any way to fix it or get it out???
@AM-fr5gl
15 күн бұрын
Thanks for your response! Great!
@LittleWindowsResin
7 күн бұрын
Hello! When that happens to me I drill it out or use an Xacto knife to cut out the extra resin. Hope that helps :)
@seanditch4419
5 жыл бұрын
Hi great video, you make it look easy, the size of the pendants you said were 1" and the punch cut 1" yet in the video it looked like there was loads of room for the picture to go in without it being tight to the sides, what was the inside measurement of the pendant? thank you
@lisajarvis3820
2 жыл бұрын
Please can you do a video showing how to do the Dichro-ish film and fine black glitter resin on clear photo paper adding a photo as well ~ this what I want to learn how to do! Can you please tell if your products can now be delivered to 🇬🇧 ~ In passed not all the items I was after could be mailed here~ I’m hoping things have now changed!!
@LittleWindowsResin
2 жыл бұрын
Hello Lisa! I'll be happy to look into this, but I'm not sure just what you mean. Do you have a photo you can send or a sketch to make sure what I'm imagining is what you'd like? And yes, we can ship anything you'd like :) fran@little-windows.com
@elsabeschmidt9182
8 жыл бұрын
What is the difference between the Ice Resin and Liquid Glass Resin? Is this just another name in South Africa?
@DeniseOConnell-h2i
11 күн бұрын
Do you have to pre-coat the paper or picture?
@LittleWindowsResin
7 күн бұрын
Hello Denise! Not if you use our Special Photo Papers for Resin, here's a link so you can check them out. www.little-windows.com/collections/special-papers Thanks for asking :) fran@little-windows.com
@skyone4950
2 жыл бұрын
I'm new to using resin so I have a few questions. Is this resin the same as uv resin or does it set by itself and if so how long does it take to set by itself. You are not using gloves what happens if resin gets on the skin? Does it smell loud, do we need a mask. Do you need special paper and ink for the photos? Thanks
@LittleWindowsResin
2 жыл бұрын
Hello Sky One! This is not UV resin, it's an epoxy resin, which means it's 2-parts that get mixed together in whatever amount you need, then it sets up on its own and can be handled after 12 hours, which gives you plenty of time to move and add elements. This Brilliant Resin is the safest you'll find, and since I'm usually making tiny things with tiny batches, I don't wear gloves as that tends to make more of a mess as I fiddle. If I get any on my fingers I wipe with dry paper towel then wash with dish soap until it's no longer sticky. This brand does not have much smell at all, but if you are chemically sensitive you can certainly wear gloves and a vapor mask. www.little-windows.com/collections/brilliant-resin-2 I use these Special Photo Papers for Resin, which can be inkjet or laser printed. They make a permanent bond with inks, and do not need to be sealed before resining. www.little-windows.com/collections/special-papers I hope that helps :) fran@little-windows.com
@sherryroberson446
3 жыл бұрын
Can u use a torch or heat gun for removing bubbles? Thanks ms. Sherry
@LittleWindowsResin
3 жыл бұрын
Hi Sherry! Please never use a torch with resin, it's just too hot and can be harmful in many ways, but you can certainly use a heat gun on a low setting. This is especially important as you work in molds as high heat can cause resin to bond to the mold material. Hope that helps :)
@Slimm_Sheedah1
3 жыл бұрын
I am noticing that resin that has been in pendants for a month or so just pops out why is this happening
@LittleWindowsResin
3 жыл бұрын
Hello Elle! This can happen when the inside of a bezel is super shiny and polished, the resin doesn't have enough to grip onto. If you'd like to send me a photo of your bezel and the piece that popped out I'll be happy to advise on how to get it back together, and in future you can lightly sand the inside of your bezels - or at least around the edge rim, to give your resin something to grab. Thanks for asking :) - fran@little-windows.com
@Slimm_Sheedah1
3 жыл бұрын
@@LittleWindowsResin thank you!! Love your channel and products.
@marisolposada8685
8 жыл бұрын
is so love your proyecto is very good condition and proyecto the estudiantes
@ritashea5311
Жыл бұрын
You mention a photo punch but can’t find it?
@LittleWindowsResin
Жыл бұрын
Hello Rita! I'm not sure which punch you're interested in, but you'll find ones that match our bezels, molds, and photo cropping software here: www.little-windows.com/collections/paper-punches-2 Thanks for asking :) fran@little-windows.com
@christinebirch8945
5 жыл бұрын
Love your work can you tell me if you can colour the resin before you put it into your mould as a solid colour thanks Chris uk
@TheShawna78
4 жыл бұрын
Shouldn’t you seal all the photographs with mod podge or something like that before putting it in resin?
@LittleWindowsResin
4 жыл бұрын
Hello Shawna! Yes, unless you're using one of our Special Photo Papers for Resin, which you'll find here: www.little-windows.com/collections/special-papers Thanks for asking :) - Fran
@katerinasindelarova9667
2 жыл бұрын
Hey! Thanks for your video! I have only one question - when you apply epoxy in thin bezels, does it stay in there? I'm scared that it would be easy to pop it out..
@LittleWindowsResin
2 жыл бұрын
Hello Katerina! I know what you mean, but what matters more than the depth of your bezel is the surface texture. If it's super shiny your resin is vulnerable to popping out, so I usually sand/scratch up the inside of the bezel a bit before pouring resin, to give it more grip. If it does pop out you can always glue it back in, but it's better to avoid that if possible and routinely rough up the metal before filling. Does this help? - Fran
@bttarga34
6 ай бұрын
How do you attach the cabochons to the bezels?
@LittleWindowsResin
6 ай бұрын
Hello @bttarga34, sorry for any confusion, these are not cabochons, I'm layering images and Dichro-ISH Films in Brilliant Resin in each bezel. Here's a link to the full tutorial with close-up photos that should help explain the process: www.little-windows.com/blogs/project-center/88157511-resin-in-bezels Please let me know if you have any more questions :) fran@little-windows.com
@bttarga34
6 ай бұрын
@@LittleWindowsResin that’s really useful thank you 🤩
@kiruthikak3175
4 жыл бұрын
Will resin bond with tha metal or will it come off
@LittleWindowsResin
4 жыл бұрын
Hello Kiruthika, that depends on how shiny/smooth the metal surface is. Resin needs something to grab onto so if your metal has a lip that'll hold it in, or a pattern in it you should be OK, if it's super shiny and smooth, you can rough it up just a tiny bit using fine grit sandpaper or a nail file. Let me know how your projects turn out! - Fran
@kiruthikak3175
4 жыл бұрын
@@LittleWindowsResin thank u so much
@judittoth4527
7 жыл бұрын
Great video 🙂🙂 Could you put resin on a ring or a cuff? I mean all the way around. Thanks
@LittleWindowsResin
7 жыл бұрын
Thanks Judit! It's challenging but doable, you'll have to find a way to either 1) let the resin thicken up and apply in thin layers while keeping the piece turning as it sets (a bit tricky), or 2) create a thinnish flat piece, then trim and apply it around your piece before the resin hardens fully. Our Amazing Tape will be a big help with this option. I hope that helps, let me know how your creations turn out :)
@kimhuff
8 жыл бұрын
Fran, where did you get that deep bottle cap type bezel?
@TheReviewKing909
3 жыл бұрын
Can you recommend a gloss spray for when the mold leaves the piece hazy. I cant find the brand you use locally.
@LittleWindowsResin
3 жыл бұрын
Hello, I've heard good things about Krylon Gloss UV Resistant Spray, and you may want to check out this video for 2 other options: kzitem.info/news/bejne/taGe32GOnqp0eW0 Hope that helps :) - Fran
@KristinOSteen
5 жыл бұрын
Hello and Thank you for a great tutorial! I’m just about to try this for the first time and I have a question. When you make you piece first and Then glue it to the tray, you also use resin?
@LittleWindowsResin
5 жыл бұрын
Hello Kristin! You can use a few drops of resin, or a strong adhesive that works well with metal and resin, you can try something like E6000 if you don't mind the smell. Best wishes :) - Fran
@KristinOSteen
5 жыл бұрын
Thank you so much Fran!
@kimhuff
8 жыл бұрын
I so love your videos. I love the idea of the snowflake but couldn't find any small ones. I'd like to get some from 2 inches and smaller. Where did you get yours?
@LittleWindowsResin
8 жыл бұрын
+Kimberly Huff Hi Kim! I got that sticker sheet at Hobby Lobby, here's a link to what they have online, in case you don't have a store near you: www.hobbylobby.com/search/?text=snowflake+sticker Have fun!
@Violettasfood
8 жыл бұрын
I love all this!! I have tried to buy a kit in Italy, but at the moment seems impossible to find it. Maybe in Europe through Amazon?
@LittleWindowsResin
8 жыл бұрын
+Violettasfood Thank you! Sorry if this duplicates our email chain, you're welcome to order directly through little-windows.com Shipping cost is based primarily on the weight of your package, so if you put the goodies you'd like in your shopping cart then enter your full shipping address, you'll see quotes for your shipping options. Here is a code you can use on your first order for 10% OFF, to help offset shipping costs: LW1016 Have lots of fun creating : )
@biddystar
3 жыл бұрын
Your work is beautiful! However don't you have any health concerns working with resin?
@LittleWindowsResin
3 жыл бұрын
Hello Brigitte, thanks for your comment! I understand and appreciate your concern. I use Brilliant Resin, the safest epoxy you'll find. There is safety guidance on the bottles and in all of the maker guides, and I'm typically mixing small batches (1-2 TBSP), to make small projects, I cover them with dust covers, and have good ventilation in my space. Resins are sensitizers, meaning the more you're exposed, the more likely you may be to experience irritation. You'll need to consider situational use of both gloves and vapor masks/respirators, depending on the size of your project and your frequency of use. This is especially important if you're using a resin that contains more harmful chemicals, if you're working in a space that doesn't have good air flow, and/or if you're working on larger projects (canvases, tumblers, large castings, etc), making multiple projects simultaneously, mixing large batches, or not using dust covers. If you have chemical sensitivities, or plan to use a lot of resin, you'll certainly want protective gear. If you have any other questions email fran@little-windows.com and I'll be happy to help. Keep creating :) - Fran
@rosygarcia3135
7 жыл бұрын
Excuse me could you please to say me where I can buy the metalic base? Because I live in México, and I can´t find it THANK YOU VERY MUCH
@deewilliamson9966
7 жыл бұрын
I would go online and check for blank bezels.
@LittleWindowsResin
7 жыл бұрын
Hello Rosy! You can get some on our website little-windows.com, here's a direct link: www.little-windows.com/collections/jewelry-bits-2 You can also search online for blank bezels, as Dee mentioned. Have fun!
@loysheker
4 жыл бұрын
Wonderful! May I ask what do you call that puncher you used for the photo. Where can i buy it?
@LittleWindowsResin
4 жыл бұрын
Hello! We offer good quality paper punches here which are designed to fit our resin molds and our metal bezels :) www.little-windows.com/collections/paper-punches-2
@TheReviewKing909
3 жыл бұрын
How do you make the piece ahead of time in a mold?
@LittleWindowsResin
3 жыл бұрын
Hello, I'm not sure I understand your question, but I'll be happy to help if you can explain further. Thank you :) - Fran
@sandrawilliams1558
3 жыл бұрын
Love your tutorials. Please where can I purchase the stickers you used in this video? Thanks a mil.
@LittleWindowsResin
3 жыл бұрын
Thank you! There are so many projects in this video, can you be more specific? If you mean the silver glitter ones you'll find them at Hobby Lobby or online, if you're thinking of another kind just let me know and I'll be happy to help :)
@sandrawilliams1558
3 жыл бұрын
@@LittleWindowsResin the circle ones that you used the punch cutters then placed in the bezels. They look like they were on film.
@sandrawilliams1558
3 жыл бұрын
@@LittleWindowsResin I looked on your site and didn't locate them.
@taraposton2402
5 жыл бұрын
Hi, your work and the video is awesome! I went to your store online and I only see the part B for resin. Do you only use part B? Or do I need part A also? Thank you agian
@LittleWindowsResin
5 жыл бұрын
Hi Tara! Sorry for any confusion, our special epoxy formula has 2 parts, we sell replacement Part B in case time gets away from you and your Part B starts to tint a little after a year or two. Here's a link to our most popular Brilliant Resin Set, and here's a code you can use for 10% OFF: LW1019 Have lots of fun creating! - Fran www.little-windows.com/collections/brilliant-resin-2/products/resin-12-oz-set
@Calaneet
3 жыл бұрын
עGreat Video!!! What size is the circle made by the hole puncher?
@LittleWindowsResin
3 жыл бұрын
Hello Calaneet, sorry for the delay. We have 2 punch sizes - Our Small Punch is 5/8", our Medium Punch is 1". You can find them both here: www.little-windows.com/collections/paper-punches-2 Thanks for asking :) - Fran
@theguitarpicker
4 жыл бұрын
Awesome tutorial. But, 4 hours to let an alcohol wipe dry off?
@LittleWindowsResin
4 жыл бұрын
I know, it's extreme, but some people douse their projects so you potentially could end up with a 4-hour dry time, and since the alcohol likely contains water, this is a better-safe-than-sorry scenario. You'll have to gauge it yourself but just know that epoxy resins hate moisture. Thanks for the feedback, I think this helps clarify for everyone :) - Fran
@theguitarpicker
4 жыл бұрын
LittleWindowsResin I would never thought of that. I keep a box of wipes, I use them in stained glass and anytime I need a quick clean. I would have never poured it on something like that. Had no idea people do. Thanks for clarifying it.
@TheKelinrose
7 жыл бұрын
Do you think you can make wire frames and do this same technique? I am looking to do some hearts and tear drops as well as squares, ovals and circles.
@LittleWindowsResin
7 жыл бұрын
Hi Christi! Yes you sure can, the trick will be the part where the wire crosses over itself. The resin can easily slip under at that point, so you'll need to either ensure it's flat with a good tape seal, or let the resin thicken up more before pouring so it's not as likely to travel out of any gaps, or you can let the resin flow, let it set up, then trim it off the outside with sharp scissors. Have lots of fun, and please let me know how your creations turn out :)
@TheKelinrose
7 жыл бұрын
awesome, as I said, I have some glass cabochons that Need to be used, I might press them into silicone molding and use that molding that way and find some way else to use them.
@TheKelinrose
7 жыл бұрын
I also order some of the resin before I had received the coupon on the other comment... It's ok though.
@tinafrick6146
5 жыл бұрын
Can you tell me where to find the big bead ring you used as an open bezel?
@LittleWindowsResin
5 жыл бұрын
Hi Tina! Do you mean the black one? If so it's an onyx ring I found at a bead show. I have a few more in my personal stash if you're interested let me know fran@little-windows.com I also have decorative red ones like the one you'll see if you scroll down in this post : www.little-windows.com/blogs/project-center/88157511-resin-in-bezels
@barbaraparker3733
7 жыл бұрын
Where can we find the casing and magnet that you used? I think you said you found it at a scrapbooking show. Curious to know the name of the vendor.
@LittleWindowsResin
7 жыл бұрын
Hi Barbara! Here's a link to our super-strong magnets that were used in this video: www.little-windows.com/collections/accessories/products/super-strong-magnets-small-value-pack-10 Here's a link to that flower bottle cap bezel, only $12 for 50! www.etsy.com/listing/481863267/flower-petal-bottle-caps-set-of-50-great?ref=market Please let me know how your creations turn out, and have lots of fun :)
@myhappynest6125
3 жыл бұрын
How do you minimize the size of your photos to begin with?
@LittleWindowsResin
3 жыл бұрын
Hello! Here's a link to a tutorial in which I demonstrate 3 ways you can resize your photos to fit small projects like these: kzitem.info/news/bejne/zGiAq5ptaYaZiYY Option 1) Using our online Photo Cropping Software at little-windows.com, there is a free version you can try before you buy. Option 2) Using GoogleDocs or MicroSoft Word to resize your photos. Option 3) Using Photoshop to resize your photos. You'll see the pros and cons of each option to see which best fits your needs. (In my opinion our Photo Cropper is the easiest, let me know what you think :) If you have any other questions just let me know, I'm happy to help. - Fran
@myhappynest6125
3 жыл бұрын
@@LittleWindowsResin thank you so much😊
@kimhuff
8 жыл бұрын
Thanks Fran! I found the silver ones for 24 @ $3.99. what size were those magnets. I don't want to get something too big or deep? Thanks for all you do!
@LittleWindowsResin
8 жыл бұрын
+Kimberly Huff The ones I have fit a 1" piece of paper in the inside bottom (matches our 1" paper punch :) I think it's about 1/4" deep, but that's from memory as they're packed up for a show. Let me know how yours come out - photos always welcome!
@50holdingcee49
7 жыл бұрын
do you need a uv light to dry resin?
@robyn7465
6 жыл бұрын
The sun works too.
@mariedriskell8752
Жыл бұрын
Are your prices still the same in 2023?
@LittleWindowsResin
Жыл бұрын
Hello Marie! Yes, despite the chaos in sourcing every element over the last 2 years, I've done my best to keep pricing stable, pushing for efficiency in assembly and production vs. charging you more. So far, so good! Keep creating :) fran@little-windows.com
@sharrontowerzey3642
5 жыл бұрын
what sort of tape do you need for the open bezels would it matter
@LittleWindowsResin
5 жыл бұрын
Hi! You'll want a tape that's strong and flat like clear packing tape. I hope that helps :)
@lenniesoke
8 жыл бұрын
MY RESIN WON'T HARDEN ?
@LittleWindowsResin
8 жыл бұрын
Hello Lennie, I don't see any orders from you in our little-windows.com system, what type of resin are you using?
@sharrontowerzey3642
5 жыл бұрын
do you need to use a UV lamp for the resin. love the videos
@LittleWindowsResin
5 жыл бұрын
Hello Sharron, our Brilliant Resin sets up on its own once you mix Part A and Part B together, no equipment needed :) Thanks for asking!
@heven4923
3 жыл бұрын
Please put the Arabic translation
@sonalpatel6119
5 жыл бұрын
😀
@ThisOLmaan
3 жыл бұрын
you seem like ur a woman that knows her crafting hope you can help me out, I bought the deep circle bezel HERE: www.hobbylobby.com/Beads-Jewelry/Jewelry-Findings/Bezels/Extra-Deep-Circle-Bezel---38mm/p/69301 it's 38mm i assume the inside so I wanted to measure the inside with a digital caliper but one reads 17.9mm so I'm now confoozed, or am i measuring with the wrong tool? hope you could resolve this TY and for the video, i enjoyed watching.
@LittleWindowsResin
3 жыл бұрын
Hello Rom3! Sounds like your calipers are converting your measurements to radius instead of diameter, can you look to see if it has another setting or markings on the other side? That one should be 38mm but the online description doesn't say if that's the inner or outer dimension. If you'd like to email me and let me know what you're trying to fit in there I'll be happy to advise :). - fran@little-windows.com
@ThisOLmaan
3 жыл бұрын
@@LittleWindowsResin : oh maybe hadnt thought or reading radius even in its has MM and In" ? but what you said mask sense is judyt i tried asking or look up videos and none that have measured an actual bezel circle
Пікірлер: 137