Kindly guide about the print of photo like if we have to take print on glossy photo from photostate print shop or from photographer shop
@Jin.art_
4 ай бұрын
Did you get the answer please share with me also😢
@sefaligamit9888
4 ай бұрын
Me also
@kanishaarora7287
2 ай бұрын
It needs to be printed on a photo paper and then you can laminate it
@ShubhiArtsCraftsByNeha
2 ай бұрын
From photographer shop will be the best
@ShubhiArtsCraftsByNeha
2 ай бұрын
If you take printout, need to do laminate it before
@Gourvi-padhan
Жыл бұрын
Ultimate ❤❤❤❤❤❤❤❤❤❤ like this photo frame ❤❤❤❤❤❤❤❤❤ Hi your father is so handsome and you mother is very beautiful ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@nargisbanu2462
Жыл бұрын
Price
@Riyaaa132
10 ай бұрын
First layer uses liquade name ?
@SahalaSalam
4 ай бұрын
Resin with pigment i think they use white pigment
@ShubhiArtsCraftsByNeha
2 ай бұрын
Yes resin with white mica powder
@athirakrishna5709
17 күн бұрын
Hloo baby resin cheyan entha rate
@mansichavan7941
7 ай бұрын
Did u laminate photo how u got photo from print fr9m xerox
@ShubhiArtsCraftsByNeha
Ай бұрын
Yes I laminated the photo.
@nishalath4459
Жыл бұрын
Hv u laminated the photo or hv u put smthing on
@janetbradley97
6 ай бұрын
I thought about laminating them
@ShubhiArtsCraftsByNeha
2 ай бұрын
I used nothing on this but now I laminate my all pics before putting in to the resin
@craft_by_naaz786
Жыл бұрын
Would u pls send d mould link mam
@ShubhiArtsCraftsByNeha
Жыл бұрын
You can find it on Amazon. I ordered it in US because I am in US.
@urfisvlog7850
7 ай бұрын
What is the name of sticker you have used please tell
@nikhlo__7
8 ай бұрын
How to use last glue
@annietremblay1624
6 ай бұрын
My picture or flower always float up how do you keep it so it wont go up put glue under it or a bit of epoxy under?
@ShubhiArtsCraftsByNeha
2 ай бұрын
Yes you should stick them before pouring resin. I use superglue
@sonalisingh5545
Жыл бұрын
What's the cost of this frame according to Indian rupee
@niyatiliya8151
9 ай бұрын
In the end mixture of 3:1 liquid is used or only resin is used?
@ShubhiArtsCraftsByNeha
2 ай бұрын
I use 1:1 ratio resin & hardener
@rjeyabharathi435
2 ай бұрын
Using what you stick the photo?
@ShubhiArtsCraftsByNeha
2 ай бұрын
I use super glue
@peapeachpeaches100
10 ай бұрын
Very beautiful just wondering do you laminate the picture
@ShubhiArtsCraftsByNeha
2 ай бұрын
I did not laminate this one
@ShubhiArtsCraftsByNeha
2 ай бұрын
But if you do laminating would be great
@LindaBoy-fy2ou
Ай бұрын
Hi ! Where do you buy the blower thank you
@ShubhiArtsCraftsByNeha
Ай бұрын
Hi, this is also called heat gun and I bought it from a Art & Craft store in USA called Michael's, it is also available in other store as well as online.
@pg__makeover
2 ай бұрын
Mere photo k color hi uad gya h resin dalte hi aisa kyu hua h koi bto plz
@ShubhiArtsCraftsByNeha
Ай бұрын
Resin peels through the paper, isliye photo ko laminate karna zaroori hai.
@samscam9241
Жыл бұрын
How did you fix the lights? It keeps popping for me? Did you use any glue or tap or anything?
@olubukola7
Жыл бұрын
If you wind the wires together and forn a heart shape to fit the mould it will stay put. Also a small layer of resin to preferable to hold light string in place
@SrinivasaRao-hh3fm
Жыл бұрын
Hi For two layers which type of resin your using 3:1 or 2:1 ???
@akankshayadav6542
11 ай бұрын
Waise to koi v use kar sakte ho lekin casting k liye 2:1 better h or coating k liye 3:1
@ShubhiArtsCraftsByNeha
2 ай бұрын
I use 1:1
@user-kj6xu1kr5r
11 ай бұрын
Anna dhani konte price entha
@359csalonipatil5
Жыл бұрын
what is the name of that circle.... you put liquid... plz tell
@ShubhiArtsCraftsByNeha
Жыл бұрын
Hi, Thanks for watching. I used silicon cups for resin pouring and then using heat gun for any bubble removal.
@karishmayaduka9547
Жыл бұрын
laminate ke bad photo ko kat kar sakte h ky...ya phele cut kr luu kise shape me...fr laminate karwayu
@ShubhiArtsCraftsByNeha
2 ай бұрын
Pahle cut kar lijiye than laminate kare
@lilianalpz302
10 ай бұрын
Do you need the heat gun for this?
@Disneysunflower
2 ай бұрын
Brauchen nein. Damit geht alles nur schneller
@sayenadey114
2 ай бұрын
Dried flowers from?
@ShubhiArtsCraftsByNeha
2 ай бұрын
Amazon
@deepaligupta8042
7 ай бұрын
K kya kya metrail chahiye
@creativehandsbyRuchikaAgarwal
7 ай бұрын
Is it imp to laminate pic for resin frame
@ShubhiArtsCraftsByNeha
2 ай бұрын
It’s Depends upon you paper quality
@karishmayaduka9547
Жыл бұрын
ye printed letter ko normal paper me print kar .then laminate kar fr cut kr apne ...resin me put kiya h ky....
@ShubhiArtsCraftsByNeha
2 ай бұрын
Maine unhe bhi photo paper pe print kara k laminate kiya hai
@ramyamv7714
Жыл бұрын
Can u make dis?
@ChandlerJent
11 ай бұрын
What is the green thing you’re using?
@yaqubjr9482
10 ай бұрын
Its a heat gun heat speeds up the curing process
@Abelincoln249
10 ай бұрын
From where I can this stuff?
@Maham-Nazir
3 ай бұрын
Kon sa paper use krten photo k liye bcz meri to khrab ho jati resin m
@kez9183
3 ай бұрын
Doesn’t seem as if they answer anyone’s questions. Lots of unanswered questions on here.
@ShubhiArtsCraftsByNeha
2 ай бұрын
I use normal photo but do laminate it first.
@ShubhiArtsCraftsByNeha
2 ай бұрын
Sorry for the late response, but I am trying to be more active here now.
@novaprime2123
2 ай бұрын
How long does each section of the layers dry for?
@ShubhiArtsCraftsByNeha
Ай бұрын
Overnight (12-16 hrs)
@funandstudy1012
6 ай бұрын
Liquid names
@ellieboo1007
Жыл бұрын
What is that green thing? A dryer or torch
@ShubhiArtsCraftsByNeha
2 ай бұрын
Heat gun
@ji.couple
8 ай бұрын
What did you use for the raw picture not to get damage by the resin?
@artandresins12
7 ай бұрын
Use gloss paint photo
@ShubhiArtsCraftsByNeha
2 ай бұрын
Laminate the pic
@zeynepstokholm3302
2 ай бұрын
What is the green machine that looks like a blower/dryer?
@ShubhiArtsCraftsByNeha
2 ай бұрын
This is heat gun and you can find it at any craft store.
@zeynepstokholm3302
2 ай бұрын
Thank you 😊 I am a newbie so this was really helpful
@veronicachan1468
Жыл бұрын
Do you let it dry in-between layers?
@ShubhiArtsCraftsByNeha
Жыл бұрын
Yes
@nishagoyal2441
9 ай бұрын
How much time
@nishagoyal2441
9 ай бұрын
Or hot gun ki jgh dryer bhi use kr skte hai kyA
@supriyamatale8584
Жыл бұрын
Photo Xerox paper ke upset print kits to chalega kya?
@ShubhiArtsCraftsByNeha
2 ай бұрын
I don’t know dear. I use photo from photographs
@chamesebrewer4548
7 ай бұрын
How did you get it to lay flat?
@ShubhiArtsCraftsByNeha
Ай бұрын
using heat gun.
@shiromaniprintingworld9902
8 ай бұрын
इसमें फोटो की प्रिंटिंग मे normal कलर है या अलग होता है
@ShubhiArtsCraftsByNeha
Ай бұрын
normal but photo ko laminate karna chahiye
@shubhamchoudhary3940
Жыл бұрын
Plzz location sand
@ritikrajput7806
Жыл бұрын
Mujhe bhi ban wana hai can you share link ???
@ShubhiArtsCraftsByNeha
Жыл бұрын
I am in US, but aap India mein ho right?
@sakshichoudhary6618
Жыл бұрын
Hi , what photo pape you use?
@ShubhiArtsCraftsByNeha
2 ай бұрын
Took the photo from photo shop
@ShubhiArtsCraftsByNeha
2 ай бұрын
I took the pic from photo studios
@nishasvegkitchen6979
4 ай бұрын
How much charge of this frame mam
@ShubhiArtsCraftsByNeha
2 ай бұрын
It depends on customization. It will cost you form 1200-1600/- Rs.
@luvbugz91
Жыл бұрын
Is that a blow dryer you use ?
@victoriarae5337
10 ай бұрын
I need tips on how to plz n what tool I need
@ShubhiArtsCraftsByNeha
2 ай бұрын
I use heat gun
@resin_reme
4 ай бұрын
Laminate photo rahata hai kya 👀
@ShubhiArtsCraftsByNeha
2 ай бұрын
I laminate it first and then pouring the resin.
@srividhyamurthy4383
Жыл бұрын
Price please
@patelneha5326
Жыл бұрын
Dm me the art gallery 2607 mahadev profile
@srilekhagunasekaran
5 ай бұрын
How to contact
@siril2470
Жыл бұрын
Photo laminted or not?
@ShubhiArtsCraftsByNeha
Жыл бұрын
Yes, I laminate the photo first, cannot cover in YOuTube Shorts but detailed video will have it.
@dhanu0518
Жыл бұрын
@@ShubhiArtsCraftsByNeha please put a video on photo lamination and printing words to use in resin
@milolomi8072
Жыл бұрын
wat kin of letter did you have did u printed it that or what
@ShubhiArtsCraftsByNeha
Жыл бұрын
Hi, I printed it on photo paper and cut it into shape.
@swamirajarts4444
8 ай бұрын
How to order
@ShubhiArtsCraftsByNeha
8 ай бұрын
Can you please send me your contact details @shubhiartsandcrafts@gmail.com and I will contact you on WhatsApp.
@cheyanneprivate1942
4 ай бұрын
Did you put hardner on the top as well as have it missed with the pearl colored resin?
@ShubhiArtsCraftsByNeha
2 ай бұрын
I did it in 2 coatings but please note that the Hardner is not used alone, you have to mix both parts and do.
@ajmiya_shan
Жыл бұрын
Price plz
@DDlovelyresinart
Жыл бұрын
Buy from us 650 + shipping
@lulamamhlaba3112
5 күн бұрын
Rands? @@DDlovelyresinart
@sagai5516
Жыл бұрын
Why would you put your parents on it
@ShubhiArtsCraftsByNeha
Жыл бұрын
I made it for my friend's parents as a surprise gift from her. isn't it loving?
@user-pk2wl1nb1y
5 ай бұрын
Fakiy
@setarabegum663
2 ай бұрын
How to order
@ShubhiArtsCraftsByNeha
Ай бұрын
You can share me your location and send an email to shubhiartsandcrafts@gmail.com
Пікірлер: 123