I am using my same mask/seal and tubing for over 4-years now. They are holding up just fine. I change my filter about every 6 months with some felt type material from Michaels that cost me about $1, and I can cut about 20 filters for it! My machine is now about 5-years old and works beautifully. It's obvious the manufacturer is telling us to change our parts frequently so they can capitalize on it... Just keep your AirSense 10 clean and it should be trouble-free.
@paolomazza3377
Жыл бұрын
i agree this is a money grab, this guy get paid on referrals to the parts dealers, why would you jhave to change the water tank if its not cracked or mildewed
@geoffsh100
Жыл бұрын
Same ... I've been sleeping with a CPAP machine for 2 years. Initially, I bought-into the replacement schedule and so I have a collection of masks, two sets of tubing, and two humidifier chambers, but haven't purchased anything for about 18 months. I decided to gamble once and put my nasal pillows in the dishwasher (without dirty dishes) in the silverware basket. I used Cascade and ran it on its most gentle cycle with heated dry off. It works! They come out spotless and without damage. I also bought two dishwasher safe humidifier tubs. This stuff does NOT wear out! I just make sure I regularly clean everything.
@Sleeplayground
Жыл бұрын
Thanks for sharing
@xavern81
Жыл бұрын
Just checked recently, my F20 cushion is used since March 2022 and now it is January 2023. I soak it daily in mild dishwash to remove the oil from my face. Same set of humidifier and tubes since 2019 (yes it's 3 years and more). All is good. Only thing I change every 2 weeks is the filter which is dity cheap.
@matthewbeeler3354
Жыл бұрын
Agreed, there is zero reason to be replacing a plastic reservoir every 6 months. Its literal plastic. As long as it stays clean there is no reason to replace it.
@sherrym4300
Жыл бұрын
FINALLY! Someone who focuses on the CPAP machine, itself, not the supplies. All these videos on how to clean the supplies, none, that I can find, as extensive as you are about the machine, just the machine. Thank You!!!!
@Sleeplayground
Жыл бұрын
You are so welcome! Thank you for the words of encouragement!!
@jared7393
2 жыл бұрын
Best overall video of the Resmed Airsense 10 Cleaning and Maintenance. Finally, someone explains how to remove the rear outlet and the proper methods of cleaning the whole device.
@Sleeplayground
2 жыл бұрын
Thanks for watching!
@mauriced9335
16 күн бұрын
I've been using my CPAP machine for 5 years and the only instructions I got was to use distilled water and change the filter every three months. I don't use distilled water only boiled water left in the fridge overnight and it has worked fine for me. However thank you for showing how to thoroughly clean the actual machine I feel as if It's fresh air now.🤩
@alaska79
4 ай бұрын
I've had my machine for about 3yrs. Never knew that inner piece came out. I've been wanting to clean it. Now I know.
@Sleeplayground
4 ай бұрын
Glad the video was helpful! Anything we can do for you, let us know!
@haveagoodday5737
Жыл бұрын
I have tracheobronchomalacia my trachea is collapsed from delta variant. It's terminal this is how I have to clean my CPAP because any infection I get can give me less time. Thank you for this video. God bless everyone and take care of yourselves❤
@Sleeplayground
Жыл бұрын
God bless you as well! God this video was helpful to you. Please take care as well!
@terrythornock6468
Жыл бұрын
I just started CPAP for the second time in several years. This is great information. I’m a Disabled Veteran, so the VA supplies me with all the CPAP supplies I might need. It’s one thing the VA does quite well!!! They told me I stop breathing 92 times an hour and for them to count it, I have to stop for at least 10 seconds. Yeah right!!! Whatever. If that were true, I’d think I should be dead!!!! How did I ever manage to wake up without a CPAP????🤔
@Sleeplayground
Жыл бұрын
Glad to hear!! Please let us know if there is ever something we can supply you with at Sleeplay.
@silvermane5695
2 жыл бұрын
I love this video, you explained it in great detail the maintenance of the machine; however, you forgot to mention to use distilled water instead of tap water, filtered water or spring water to clean the equipment. The minerals deposit (e.g. calcium) of this type water will accumulate in the reservoir and tubing. I don't clean it every day like the manufacture suggest, I do it maybe twice a month and the filter once a month.
@Sleeplayground
2 жыл бұрын
Thank you for the feedback. We certainly did miss it in this video but we spoke about that in detail here: kzitem.info/news/bejne/rYiKuY5ofoyLYII
@Sleeplayground
2 жыл бұрын
You are correct, thank you for adding that in.
@richardkingadi5511
Жыл бұрын
A little bit of white vinegar will quickly remove any lime deposits
@TerryEdson
2 ай бұрын
Best directions I have found to clean the machine. Extremely comprehensive>
@Sleeplayground
2 ай бұрын
Glad it helped
@vanwrinkle-01
4 ай бұрын
This is an excellent video explaining how to clean the machine. I've struggled with the cleaning of the tank for years. I was always told not to use tap water to clean it because it would cause a calcium build up in the tank when you used the machine. I've come to realize that 2 of the places I used to buy my machines and supplies from were not only clueless but down right dangerous. One of them sold me a fisher price (paskal) machine. Burnt out in the second month of use and apparently there was no warranty on the machine. $1500 for just the machine down the drain. I'll never make that mistake again. Another one, when I booked an appointment the respiratory therapist never showed up for the appointment (left me sitting in my car outside their locked office for a couple of hours before I got ticked off and left) unless it was to sell me supplies and then compared to the place I deal with now they sold me the supplies at a severely over inflated price. The fisher price machine cost me almost double what I payed for my last Resmed machine. Fisher Price machine, hose and mask $1900. My recent Resmed Airsense 10 with the machine, tube, mask and filters just over $800. I also asked both of them how to clean the mask, tube, water tank and machine. You would not believe the bull they tried to feed me. Then I came across this video some time back and your other one about cleaning the tube. They blew my mind. I contacted the respiratory therapist I see now and she explained it all to me. I even bought the brush kit for cleaning the tube. She never mentioned it because she thought I already had the brush kit and knew how to clean everything. She was stunned to find out that the other 2 knew nothing about cleaning anything. Now she takes nothing for granted. You would not believe the crap that came out of the tube the first time I cleaned it. Also the elbow piece that connects the tube to the mask was clogged with mold. I never though to ask her what to use to clean the tank. That was my bad. Now, after watching this video, I know. For that I thank you very much. Your videos are very very informative. I've bookmarked several of them for future reference. Now I know I can find any info on my machine online on your channel and I can trust that info to be correct. I also don't have to spend time on the phone bothering my respiratory therapist. I think that if she knew I said I was bothering her she would kick my ......butt all the way across the parking lot. LOL Again, I thank you very much. Take care and be safe.
@Sleeplayground
4 ай бұрын
Thank you for sharing!
@MlSSadventure
4 ай бұрын
Thanks so much! Visiting Dad for the first time since before Covid -6 years. His mask was full of mold and mildew. The filter was gross. I watched your video to tear it all apart and sanitize it. Too bad the seal from the tank to inside the device isn’t removable. That had mold as well. I cleaned it with rubbing alcohol. Setting it back up tonight. Got him subscribed with regular new pieces - he doesn’t even have to call. I can’t inders 3:34 tand wh
@Sleeplayground
4 ай бұрын
Happy to help!!
@screamtoasigh9984
Жыл бұрын
Thanks for showing how to take the hose piece out @2:28 . You really did a great job thoroughly explaining each part.
@Sleeplayground
Жыл бұрын
Glad it was helpful!
@larryrichards3668
Жыл бұрын
I would like to add that you can air dry your hose by connecting it to your machine and setting the warm up to run for 5 or 10 minutes.
@Sleeplayground
Жыл бұрын
Lol, Absolutely! I mention that in my video on cleaning. That is a great idea and thank you for sharing!
@kerriejohnston3175
Жыл бұрын
Thankyou Am most grateful Have a trial machine. Had stale air & couldn’t use machine. The filter was filthy 😅 Great information & see you have a seperate video on cleaning tubing Many thanks 😊
@Sleeplayground
Жыл бұрын
Awesome! Glad you enjoyed the video and information. Yes, there will be much more to come.
@rchw8052
8 ай бұрын
Resmed is a good product. The downside being the outrageous pricing for replacement parts, which they encourage to frequently replace more often than probably needed.
@Sleeplayground
8 ай бұрын
That is understandable, If you clean and take care f most the items. They could last longer to save you the cost.
@crapvader
7 ай бұрын
I never knew that hose piece came out till today! That’s good info!
@Sleeplayground
7 ай бұрын
Glad this video was helpful!
@edwardlove4300
Жыл бұрын
I use the Fisher Paykel Vitera and I usually get about a year out of it. I've never changed my water container or hose. My doctor recommends changing the air filter every 7 months. Maybe I live on a different planet but my therapy is wonderful. I can't imagine following any of your advice!
@Sleeplayground
Жыл бұрын
Hi Edward Love, I apologize for anything not agreed with. These are the standard routine replacement recommendations advised by all the manufacturers of machines and accesories.
@allisonhermann4973
Күн бұрын
Very useful! Thank you!
@karenvater7573
3 ай бұрын
Great video on CPAP maintenance!
@Sleeplayground
3 ай бұрын
Glad it was helpful!
@kathylgoedert
2 жыл бұрын
Thank you! I had no idea how to clean client's machine!
@Sleeplayground
2 жыл бұрын
Happy to help!
@auntielisa
Жыл бұрын
Good tip on holding the tubing up to the faucet! Also, I did notice that my machine sounded a little "whiny" -- I'll try changing the filter and see if that helps!
@Sleeplayground
Жыл бұрын
Thank you!
@scottcampbell188
Жыл бұрын
Awesome How to Video on properly cleaning the Resmed AirSense 10. Thank you.
@Sleeplayground
Жыл бұрын
Glad it was helpful!
@realrocker777
2 жыл бұрын
Great video. Very detailed, but simple to understand. Thanks!
@Sleeplayground
2 жыл бұрын
Glad it was helpful! Don't forget to check out our site for great supplies!
@andrebruneau6510
4 ай бұрын
Great explanations. Now that I just got my new machine, I'll adhere to a stricter cleaning schedule. I was going to invest in a SoClean machine to clean it, but everywhere it says that this will damage the CPAP machine so, no.
@Sleeplayground
4 ай бұрын
Glad it was helpful! Yes, cleaning is crucial for your unit and accessories.
@VinnieChenzo
2 жыл бұрын
This was great. The handout they gave me told me to hang it in the sun to dry.
@Sleeplayground
Жыл бұрын
Awesome! Yes you can hang out in sun over shower curtain rod or railing. You could even swing outside to get a little more water out if needed. Lol!
@goodbotshop7942
Жыл бұрын
Great video! Simple and use ful. Thank you!
@bassboy8910
2 жыл бұрын
Very well done. Good clear instructions. Very detailed. Thank you!
@Sleeplayground
2 жыл бұрын
Thanks for watching!
@jenniferrodriguez6869
2 жыл бұрын
Great video! I come to this video every time it is time to clean it. :)
@Sleeplayground
2 жыл бұрын
We are glad it helps! Thank you for watching.
@PCJ52
Жыл бұрын
Thanks for a good explanation. I did not see a link that you mentioned the more detailed video. Thank you.
@Sleeplayground
Жыл бұрын
Glad it was helpful!
@richardhane2307
Жыл бұрын
I can't believe I am still alive. I have been using my resmed for over 7 years and never cleaned it this completely. I use one those electronic cleaners for the mask and hose. I rinse out the water chamber and change the filter weekly. Just lucky I guess.
@Sleeplayground
Жыл бұрын
That's great!
@shirleyhall3555
Жыл бұрын
There is a lawsuit on the Soclean machine manufacturer and it is not FDA approved. Be safe.
@baskins3320
4 ай бұрын
Good description but would also like to see this with a different mask, such as the AirFit P10 Mask with Headgear
@Sleeplayground
4 ай бұрын
This was a general cleaning and maintenance video! Will try to include P10 for sure next time.
@Angel-op1ou
Жыл бұрын
I thought the ResMed website says: 'Once a week, soak your humidifier tub in warm water using a mild dishwashing liquid OR in a solution with a ratio of 1 part vinegar and 9 parts water at room temperature'. Not 1:1 vinegar to water but 1:9 vinegar to water.
@Sleeplayground
Жыл бұрын
Yes, you can use vinegar and water as some choose. You can also use mild soap and warm water to clean. It is up to you! It should be at least once a week.
@markhiggins4452
Жыл бұрын
Good video just started using CPAP
@Sleeplayground
Жыл бұрын
=)
@kevinp7300
Жыл бұрын
Cleaning this machine is annoying! It’s helped me not snore anymore boy what a task to clean this! Nonetheless good video!
@Sleeplayground
Жыл бұрын
Yes! Thank you!
@stevecampbell3226
Жыл бұрын
I have used alcohol wipes to clean my mask and water chamber for over 10 years and never damaged anything. Alcohol can damage some, but not all plastics, will not damage silicone, and is the most common method of cleaning medical grade silicone. You replace cushions every month and everything else in 3 or 6 months anyway, right? Replacement supplies are covered by insurance and medicare, so what is the worry anyway? A lot of advice is given by people that have never owned or used a CPAP machine. The disassembly procedure shown for the machine is good.
@Sleeplayground
Жыл бұрын
Thank you for your feedback. Not everyone is purchasing their CPAP machine or supplies with insurance so maintenance of these items is important. Our respiratory therapist has been doing his job for 15 years and he is a CPAP user so I am confident he knows what he is talking about.
@stevecampbell3226
Жыл бұрын
Like I said, I have never damaged anything using alcohol. That speaks for itself. Maybe you never noticed, but alcohol comes in plastic bottles.
@kwhite145
2 жыл бұрын
Just started using machine good info for me thanks
@Sleeplayground
2 жыл бұрын
We hope it's going well for you! Feel free to reach out on our site if you need any assistance or supplies!
@pitbull004
Жыл бұрын
Great video. Thank you for the tips!
@a.h.s5152
2 жыл бұрын
Thanks for the info on how to clean them I'm not happy at all having to use one I'm being forced to
@Sleeplayground
2 жыл бұрын
Hello, We understand it can take time to get used to the CPAP but try to stick with it. It will benefit you long term
@mroudemus410
2 жыл бұрын
Great explanation. Thank you. Just what I needed.
@Sleeplayground
2 жыл бұрын
It's our pleasure! Feel free to check out our site to make it even easier!
@pammcardle40
Жыл бұрын
Thank you!! I wanted something explaining how to take the machine apart to clean. Mine is making a weird whining sound from the machine and Im hoping it just needs the innards cleaned.. 🤞
@Sleeplayground
Жыл бұрын
How are you today? Yeas from my experiences from past patient's the whining is coming from the motor and needs to be replaced. There is usually a 2 year warrant with the manufacturer. So I suggest goint to your supplier and advising and asking to have an RMA on the unit with Resmed done.
@SusanFlanigan
Жыл бұрын
I have a Resmed Airsense 11. I run out of water have thur the night. I wake up with my nose so cold. My health care company tells me to refilll it in the middle of night. make no sense because isn't the CPak machine purpose to help get a better night sleep.
@Sleeplayground
Жыл бұрын
Thank you for asking!! Yes, at times the loss of water in the chamber is due to the mask leaking excessively. I would go to your provider and get a mask refit to make sure you have the correct mask or the one you have fits properly. As far the cold air goes, you can adjust the humidity settings yourself if you were shown. If not while at your provider have them show you how you can adjust the humidity for future reference..
@topcat5777
2 жыл бұрын
Hello and thank-you for posting this helpful video. I have a question that I hope someone will give me the correct answer to; when replacing the while filter (ResMed S9 and AirSense 10 Style), there is a smooth plastic side to it and a fiber side...does the smooth plastic side face inward against the air intake port? Thank-you in advance for answering.
@Sleeplayground
Жыл бұрын
Hello, the fabric side of the filter should be facing inward against the air intake port.
@topcat5777
Жыл бұрын
@@Sleeplayground Thank-you for your response.
@larryrichards3668
Жыл бұрын
@@Sleeplayground I didn't know that. Thank you.
@larryrichards3668
Жыл бұрын
Good question.
@andysweeney2167
2 жыл бұрын
Thank you. Very informative
@Sleeplayground
2 жыл бұрын
That's what we're here for!
@MikeBroderick33
Жыл бұрын
Nice video. Why does the machine have to be below your head?
@Sleeplayground
Жыл бұрын
It is suggested to have the machine lower than your head to prevent condensation from collecting inside the tubing.
@MikeBroderick33
Жыл бұрын
@@Sleeplayground Thanks. I don't get condensation in my mask, but the air sure is cold even with a hose cover.
@Sleeplayground
Жыл бұрын
@@MikeBroderick33 Are you using the humidifier on the machine?
@MikeBroderick33
Жыл бұрын
@@Sleeplayground I don't have the water tub for mine, so no. I generally don't have rain-out or dryness with it. My two issues are cold air and sore eyes.
@MrNunna
Жыл бұрын
One thing I've been wondering about above & beyond what cleaning tasks were mentioned here is: Does dust build up INSIDE the machine (Airsense10) ? If dust builds up inside, would it be safe to blow some compressed air into all the openings on the unit? Like "Air in a can". I could imagine if one wasn't careful, you could damage something inside, just be careful with it...?
@Sleeplayground
Жыл бұрын
Hi, Good question I do not believe that it would be an issue.
@alvinprettyman1802
10 ай бұрын
THANKS for posting
@Sleeplayground
10 ай бұрын
Our pleasure!
@jameskeener7251
Жыл бұрын
Thank you for the good information.
@Sleeplayground
11 ай бұрын
Our pleasure!
@jaym5938
Жыл бұрын
I don't wash mine near as much. My hose is three years old and seems very clean. I'm more concerned with the insides of the machine. Nobody gets inside there to clean.
@Sleeplayground
Жыл бұрын
Hi, How are you today! Yeah if your hose is 3 years old mostly likely even with cleaning occasionally, it would be time to change I would say. As far as the machine goes recommendation is just wiping the outside of it. They last over 5 years if not much longer. There shouldn't be any issues internally. Thanks for reaching if you have any question please let me know, I would be happy to help!!
@marcopewe4185
2 жыл бұрын
Exactly
@Sleeplayground
2 жыл бұрын
Thank you.
@turbokidtb
Жыл бұрын
What about cleaning after covid??
@Sleeplayground
Жыл бұрын
Hello turbokidtb, Thanks for the question! Best practices for cleaning CPAP equipment Follow the manufacturer’s recommendation for cleaning. Read the fine print in the manual that came with the equipment. Every product is a little different, and the manufacturers test their equipment to know what might be harmful to its integrity. Most CPAP equipment cannot go into the dishwasher or the dryer, but some products can. The manual has that guidance. Some products are listed as dishwasher safe, but the fine print says it’s only ok to use the dishwasher once a week. If the manual or package inserts are long gone, no worries! RespShop has the manuals for most items available for download on the product page of each product. The manufacturers also keep them on their product pages. Establish a ritual. Clean those parts that need daily cleaning as soon as possible after you get up to keep mold and bacteria from growing in the moist environment. Even if you do not use a humidifier, your exhaled breaths create a damp environment in the mask and tubing that is very inviting to mold and germs. Dump the water out of the humidifier right away, rinse it with some distilled water, and let it start to air dry. The equipment needs to be dry before you use it again, so it is also essential to allow for enough time for air drying to occur. Create a clean start with a clean finish. Clean the container you soak your equipment in before you start. Soaking in the sink is possible, but ideally, get a plastic bucket or bin that you can wipe clean before and after each use with bleach wipes, Lysol wipes, etc. Any of those products on the CDC list are excellent choices for cleaning your container. Dry parts on clean surfaces. Draping the tubing over the shower with the ports pointing downwards is an efficient way to air dry it. Lay the mask and associated parts on a clean towel while it air-dries. Sunlight is damaging to the plastics, so do not place pieces near a window to dry. If you are using a water/vinegar mixture, replace it with each cleaning session. After everything is set aside to dry, clean your soaking container again and the surfaces of the space you cleaned in. Bleach wipes, hydrogen peroxide products, and Lysol products are all excellent choices. Next, WASH YOUR HANDS with soap and water. Say the alphabet twice in your head while you scrub your hands. Then get on with your day! Washing your hands at the end of your routine protects you, your family, and your friends.
@grumpyolemann
2 жыл бұрын
What would be better. I am using a quart of warm water with 1 teaspoon of Dawn Dishwashing soap. I have thought of maybe using Tide liquid detergent, but worry it may be too harsh? Your opinion please. Thank you.
@Sleeplayground
2 жыл бұрын
Hello, The Tide detergent would be too harsh. I would recommend something like Cetaphil gentle cleanser and warm water.
@janholman6192
Жыл бұрын
I was told to use baby shampoo, and have for the past 5 years, no problems
@lourdesdayao7443
3 күн бұрын
❤❤❤
@varschnitzschnur8795
9 ай бұрын
I'm able to use my tubing for 2 to 3 months. After this, it doesn't fit securely into the machine. If yours lasts longer, then replace it less often.
@Sleeplayground
9 ай бұрын
Absolutely!!
@MexhomieXlll
Жыл бұрын
I use a sleep8 cleaner. No water no mess.
@Sleeplayground
Жыл бұрын
Yeah that's a great product! I just did a video on that device yesterday, it is nice and simple. I agree, Thanks for commenting!
@danakibby627
2 жыл бұрын
Replacing the mask every three months that’s ridiculous and the one thing you forgot to mention as it’s distilled water not just clean water for your Reservoir
@silvermane5695
2 жыл бұрын
I think is overkill to clean the reservoir and the tubing once a week if one is using distilled water. I do it like twice a month if not once and I check the filter once a month. It's too expensive to do this weekly in my opinion.
@lunarcryptid
Жыл бұрын
@@silvermane5695 cleaning your tube is important to do frequently, and it's not just to get rid of hard water residue. It's to make sure there isn't bacteria in it because you can get sick like getting lung infections if you get bacterial build up in there. You're breathing directly into that tube all night
@yvetterenee8256
Жыл бұрын
@@lunarcryptid , Amen. I clean it more often than recommend.
@profesor245
9 ай бұрын
Ball💩 dude!!! I use my mask 3 years now and it’s working perfect!! And about water, yes u can use clean water!!!!
@CJMarco-nq1yf
9 ай бұрын
I agree!! This CPAP maintenance and replacement parts requirement is nothing more than a cash grab. If we replaced all the components on the schedule that these people tell you that you should, then we would be broke. A hundred and a half to replace a piece of molded plastic! C'mon!! You have to remember that the air comes from the machine, and not the other way that it would be infected. I clean my mask with rubbing alcohol and run that thru the hose. Then I rinse it and let it dry. In seven years I have never had any issues mechanically with the machine or health wise because of bacteria on the components. Sleep apnea is big business and a lawsuit against Resmed for kickbacks only cements the idea that it's all about profits.
@jonpaolochua792
7 ай бұрын
Thank you very much
@Sleeplayground
7 ай бұрын
You are welcome, Let us know if anything i needed!
@cherrytreeblossom8475
Жыл бұрын
This guy must be on a retainer from ResMed. Replace the water chamber every six months? I don't even think it says this in the instructions. My son's sleep therapist did say that the tubing is guaranteed for twelve months, so I guess it would bear replacing then, but this guy is over the top with the replacement schedule. How much money does he think we've got?
@Sleeplayground
Жыл бұрын
Hello Cherrytree Blossom, That is what Resmed recommends as the timeframe to replace each item.
@andreaburkhart8367
Жыл бұрын
I wasn't told or shown how to clean the elbow in the back of the machine and it contained mold. Which I'm pretty sure has been making me sick for a while now. I was only told to clean the accessories. I now know to wipe out the inside and how to take the air outake elbow in the back out (which is the piece that contained mold). Should you use tap water or distilled water to clean everything?
@letitiatyner8571
Жыл бұрын
Distilled water only
@Sleeplayground
Жыл бұрын
Hi Andrea Mable, I would recommend Distilled Water.
@trmon8890
7 ай бұрын
My CPAP is 8 years old and it has begun shutting off while in uses with a blocked tube warning and it also seem to have lower air pressure. What do you recommend I do to fix this issue? Yes I've checked the hose and it's clear
@Sleeplayground
7 ай бұрын
Hi, Thanks for reaching out! The manufacturer recommends Check air tubing and remove any blockages. Press dial to clear message. Allow sensor to dry and recalibrate and test device. If that does not work they say to replace the mother board. As far as the pressure goes. The machines lose calibration after years of use, there is nothing you can really do about that one. You may just need to get a new machine at this point. We are actually offering them at a super low price, I think $399 right now. Let me know what worked for you or what you decided. I am here if I can help further. sleeplay.com/collections/auto-adjusting-cpap/products/resmed-airsense-10-autoset-with-humidair-cpap-machine-card-to-cloud
@terematos1519
Жыл бұрын
Love it. Muy interesante video. Thankyou
@Sleeplayground
Жыл бұрын
Thank you for the nice comment!
@danakibby627
2 жыл бұрын
The fact that they say you should replace the reservoir every six months means the product either is not high-quality or it’s a scam and they’re trying to make money
@Sleeplayground
2 жыл бұрын
Hello, The reason the water reservoir should be replaced every 6 months is that the silicone seal around it can start getting loose as time goes on and that can cause water to enter your machine. I can assure you Ms. Kibby that we are a legitimate company and not trying to scam you.
@craigcook9715
Жыл бұрын
@@Sleeplayground I have two humidifier chambers which I alternate nights, so one gets thoroughly dry (especially where I live), would then every year work for replacement? Each of the two is getting half of the use. Also, you haven't replied to the question above, if it matters which side goes out on the fine filter, from @TopCat577 (7 months ago as of when I'm writing this) ... does it matter which side goes out on the fine filter? I've been googling this and haven't yet found an answer. Thank you for posting, especially as I learned here about cleaning the piece under the tubing, I didn't know it was removable.
@Sleeplayground
Жыл бұрын
@@craigcook9715 Hello, Since you have 2 water chambers, replacing every year should be okay. As for the filter, the fabric side should be facing inward.
@jacobmees8040
Жыл бұрын
It's atrocious that resmed or an aftermarket company doesn't sell the seal separate. Absolute waste of plastic and resources for zero reason.
@sheldonnorton9035
Жыл бұрын
Over the last couple of weeks, regardless of a clean tank,hose and mask, and using distilled water, the water becomes cloudy overnight. And there is an reoccurring odour from the air in the mask as well. What would cause this? Thanks for your time!
@Sleeplayground
Жыл бұрын
Yeah this is what I found. Because other than that if you weren't using distilled it would be from the calcium deposit I would say. One possibility is mineral deposits from the water you're using. If these deposits aren't cleaned out on a regular basis, they can build up and create a film over the humidifier's water chamber.
@sheldonnorton9035
Жыл бұрын
@@Sleeplayground Thanks for that! I have since done the extra steps of cleaning the accessible area of the machine itself and the removable pathway part I didn’t know about. That seems to have done it. I’m sure it’s not recommended but I use diluted CLR which is of course really thorough.
@sheldonnorton9035
Жыл бұрын
@@Sleeplayground The deposits inside the machine are almost certainly from the handful of times I’ve had to use hotel tap water. 👍🏻
@morenaprotti
11 ай бұрын
hi! in the video you said to don't dry the air chamber with paper towel to avoid to breathe paper fibers in the lungs, but then how can we dry it fast when we're traveling and cannot wait the whole day for it to dry? Thanks!
@Sleeplayground
11 ай бұрын
You can use a dry cloth perhaps! Try to avoid with a lot of lint.
@TheTrickyTD
2 жыл бұрын
Super helpful!
@Sleeplayground
2 жыл бұрын
Glad it was helpful!
@ImAshlynnCarter
9 ай бұрын
Great video!! Tysm
@Sleeplayground
9 ай бұрын
Glad you liked it!
@escope1959
Жыл бұрын
Good stuff. Thank You
@Sleeplayground
Жыл бұрын
Our pleasure!
@shilpisingh8203
Жыл бұрын
Thank you
@Sleeplayground
Жыл бұрын
Absolutely! Please reach out with anything needed. I will be happy to help!
@bemzzyofficial2819
Жыл бұрын
Thank you ❤
@Sleeplayground
Жыл бұрын
You're welcome 😊
@cshigenaka
7 ай бұрын
How can you sterilize and clean the motor area? Also can I use alcohol prep wipes to clean my machine ports and mask pieces?
@Sleeplayground
7 ай бұрын
Hi, Thanks for reaching out! You do not want to use alcohol on the cushion of the mask. You can use on the plastic frame etc. As far as the motor you would have to take the machine apart that s not recommended really. You can just wipe down the outside of the machine with a very lightly damp cloth or dry. Even the tubing port and where the chamber connects.
@erainalewis6092
Жыл бұрын
Is great video thanks
@cwkhonda
10 ай бұрын
What about the hose? I'm always wondering about using water to clean the hose and not being able to use it for days due to moister residual inside the hose. How do we dry the hose out well? because I tend to not clean it for this reason.
@Sleeplayground
10 ай бұрын
Yes, good question. We'll if you would rather pour purified or distilled water into a bucket or container that may be better for you. But your not going to get all the water out. So after you let it drip dry from a railing or shower rod. I suggest to patient's in my office, don't laugh to go outside and kind of lasso swinging it around to get as much water as able. Also you cold connect the rubber end to the machine and turn machine on and let blow if another suggestion. Hopefully one of those works for you. But yeah you are not going to get all the water out and once you use it is going to accumulate once again.
@Mdonnadesigns
9 ай бұрын
When you remove the gray elbow from the inside of the machine, is the clear part supposed to be attached to the gray part? Mine is only partially attached.
@Sleeplayground
9 ай бұрын
Hi, Thanks for reaching out! Yes, so the silicone circle should be attached loosely. But it is attached to the grey plastic that comes out. I am not sure what you mean by partially attached. I apologize can you explain.
@ghorner11
2 жыл бұрын
Is it ok to fully submerge a heated hose for cleaning?
@ThatGuyNL
2 жыл бұрын
yes
@Sleeplayground
4 ай бұрын
.
@Sleeplayground
4 ай бұрын
a
@paolomazza3377
Жыл бұрын
why do you have to replace the water chamber, its plastic and its clean, its not cracked and not full of mildew, so whats the reason to replace a piece of plastic
@Sleeplayground
Жыл бұрын
Good question! The chamber may develop cracks, pitted areas, or discoloration owing to minerals in the water and buildup inside the chamber. As the material deteriorates, cracks may trap bacteria from moisture. If this happens before six months of usage, you should replace it.
@AnascoNice
Жыл бұрын
Muy buen video!
@Sleeplayground
Жыл бұрын
Glad it was helpful!
@deanhenry4668
2 жыл бұрын
What type of cleaning machine would you reccomend for the AirSense 10 autoset machine ? Thank you for any information.
@Sleeplayground
2 жыл бұрын
The SoClean might be a nice option for you as you can connect the cleaner straight into the humidifier. The SoClean can also clean CPAP supplies inside the machine.
@MrMikesMondoVideo
10 ай бұрын
DO NOT USE SoClean. Notwithstanding the current lawsuit, no one in this industry should have ever recommended that device or any other like it. It was disturbing enough that providers ever sold these devices, And far more disturbing that they still are. Both UV and ozone will destroy parts in these machines including the sound insulating foam (see the Philips recall). After a period of time those items will break down and you will be breathing into your lungs that particulate matter.
@MrMikesMondoVideo
10 ай бұрын
@@Sleeplayground You don't mind me correcting others when they make mistakes, but when I correct you and your dangerous recommendation here, you delete my post. You're fragile ego is more important than the safety and health of the people reading these posts.
@rasmusharrasmus
7 ай бұрын
Thanks for the vid. I searched for it because I couldn't get the internal connector out. Still can't. I could remove it from my AirSense 11 but not getting it out of the AirCurve. The power port is to the side of the filter. What am I doing wrong. Is there a specific point on the tab that needs to be pressed? TIA (PS Thanks for the tip about the paper tower, I was drying the mask and tank with paper towels)
@Sleeplayground
7 ай бұрын
There is a tab that you press to allow the port to come out of the back. If that is what you are speaking of.
@rasmusharrasmus
7 ай бұрын
I was pressing the tab. I had to resort to using the end of a spoon handle to press down hard enough to release...for anyone else having problems@@Sleeplayground
@jojopuppyfish
Жыл бұрын
3:08 "The permament seal that doesn't come out" What happenes when that gets full of germs and it needs to be replaced? I found out its a complicated part to replace. Part # is 111004
@Sleeplayground
Жыл бұрын
That can be wiped down daily if you need! To kill any germs or bacteria I would say. Where did you locate that part number I checked on Resmed please?
@mariekrikava2294
Жыл бұрын
I have a air sense 10 bi-pap . I can't get the water chamber our. It has a gas get in and I think it may be stuck preventing me from opening it
@Sleeplayground
Жыл бұрын
Yes the Airsense 10 is the CPAP and the Aircurve 10 is the BIPAP, just to advise! Not sure have you ran the machine without water in the chamber sometimes that causes it to get stuck. But if you grab the top and bottom of the chamber and wiggle front and back, not up and down. It should dislodge from the machine, let me know if that workes.
@Zarathustra-H-
10 ай бұрын
Is there any way to clean the interior working parts of the AirSense 10? I clean my machine and accessories religiously. Mask, Tube, reservoir, and all the easily accessible surfaces of the machine itself, but I still have a foul odor emanating from the interior working parts of the machine, behind that seal you said was non-removable. Presumably this is where the actual air pump itself is. Is there any way to clean inside there?
@Sleeplayground
10 ай бұрын
Hi, Thank for reaching out! You can wipe around the outlets where the chamber gets pushed in. Also take take out the gasket where the hose connects. I would not recommend pulling it apart and cleaning. Mask, Tubing, Water chamber weekly and check the filters.
@darlenehelms7494
Жыл бұрын
How do you clean heated tubing with electronic connection. And how to clean mask with foam edges,?
@Sleeplayground
Жыл бұрын
Hello, You can rinse out the heated tubing since the electrical component can get wet. Please make sure it is completely dry before plugging it back in. As for the foam mask, since the foam cannot get wet I suggest you use a CPAP wipe to wipe the mask down.
@debrajackson8072
5 ай бұрын
can you use an antibacterial wipe on the machine parts and the accessories?
@Sleeplayground
5 ай бұрын
Yes!
@BanduKhandu
10 ай бұрын
Instead, I use a Slo-clean machine to keep the device clean. Is that okay?
@Sleeplayground
10 ай бұрын
You still would need to clean warm soapy water weekly, or they recommend to!
@cathyrobi3891
Жыл бұрын
Ok I've done all this and it worked for 1 night but its back to smelling again. I brought my cpap with me to a home that smelled like mildew and 2 weeks later its all I can smell from my machine even after deep cleaning it and replacing all the equipment- please advise
@Sleeplayground
Жыл бұрын
Wow! Who did you receive the machine from? If us can I have your Order number. That may be covered under warranty. That is strange.
@cathyrobi3891
Жыл бұрын
Reliable respiratory ..they emailed your video to me so I can clean it better @@Sleeplayground
@cathyrobi3891
Жыл бұрын
oh and by the way I don't use water in the reservoir but this smell is from the cabin environment I just stayed in @@Sleeplayground
@andrewdyke5561
7 ай бұрын
I cant ever get that outlet part out
@Sleeplayground
7 ай бұрын
Hi, Thanks for reaching out! Which outlet part are you referring to, I apologize!
@deirdremccrohan6710
2 жыл бұрын
When you clean the water chamber with one part white vinegar, one part water, can I use regular water or do I have to use distilled water for the cleaning as well?
@Sleeplayground
2 жыл бұрын
You could use regular soapy water just fine.
@silvermane5695
2 жыл бұрын
You distilled water for the reservoir and to clean it; you don't want to use tap water, filtered water or spring water. The minerals deposit will accumulate and create mold faster.
@spacep0d
Жыл бұрын
@@Sleeplayground So, you're recommending they mix soapy water with vinegar? When using vinegar, I think just one part distilled water to one part white vinegar would be best. Also, you never mentioned what kind of 'soap' you're talking about. Dish soap?
@Sleeplayground
Жыл бұрын
@@spacep0d No, I am recommending that after using the vinegar to use warm soapy water to make sure the vinegar smell doesnt linger. The soap you can use is something mild like dawn or a gentle cleanser like cetaphil.
@janholman6192
Жыл бұрын
@@Sleeplayground I was told to use baby shampoo to wash mine with and have been doing that about 5 years now
@sunnyvalecali6071
4 ай бұрын
I don’t even have filter cover on my machine, I guess I never paid attention and it broke.
@Sleeplayground
4 ай бұрын
Hi, Thanks for reaching out! We do provide the covers at sleeplay. I provided the link below to view and purchase if you choose. sleeplay.com/products/resmed-filter-cover
@bonniebell94
Жыл бұрын
How do you get it off the machine the tubing I’m having a trouble doing it
@Sleeplayground
Жыл бұрын
Hi, I apologize I am not understanding. Are you asking how do you get the compliance off the machine?
@gailfrance4582
2 жыл бұрын
My tubing in the back of the machine is stuck. I am having a hard time taking the tubing off.
@Sleeplayground
2 жыл бұрын
Hello, Try grabbing the silicone cuff of the tubing and twisting it side to side until it comes out.
@gailfrance4582
2 жыл бұрын
@@Sleeplayground ok I will try but it is on tight.
@brewsmack
2 жыл бұрын
use only distilled water in the resevoir and cleaning is easy and you won't breath in minerals in tap water
@spacep0d
Жыл бұрын
*breathe
@serialkiller979
Жыл бұрын
Breethe
@Sleeplayground
Жыл бұрын
=)
@ms.c3
Жыл бұрын
This is a pain in the a** cleaning these stupid machines. I heard - the key to not using cpap machines is to lose weight- one doesn’t need to use these machines anymore. (this came from a respiratory therapist) Nothing against the narrator. Thank you 🙏🏽
@michaelclermont
Жыл бұрын
Some sleep apneas are also caused by other factors than being overweight
@Sleeplayground
Жыл бұрын
Hello, The machine doesn't need cleaning inside, that is not recommended. You do need to clean the accessories (mask, tubing, water chamber). While weight loss can help with reducing or getting rid of sleep apnea altogether, for a lot of people sleep apnea is caused by something other than weight gain. It is not good to generalize since everyone's situation is different.
@user-bb8vb1ek4d
Жыл бұрын
does it matter which side of the filter faces inward?
@Sleeplayground
Жыл бұрын
Hi, Thanks for reaching out! No, ether side is fine.
@msres22
Жыл бұрын
Hi! Is it safe to get the chip looking part of the hose in water?
@Sleeplayground
Жыл бұрын
Hello, Yes it is safe. Make sure they are completely dried off before you plug it back in.
@yogiegemini2053
10 ай бұрын
How can I lower the air flow. The air flow comes in to fast and hard. The air dries out my nose.
@Sleeplayground
10 ай бұрын
Hi, Thanks for reaching out. I would not recommend changing the pressure honestly! If the air is dry you would need to up the humidity level until it is right for you in the My Options menu.
@yogiegemini2053
10 ай бұрын
@@Sleeplayground thanks I'll try that.
@rubydejesus9119
2 жыл бұрын
This machine goes off for more than one minute while I have it on my face it's scary like hell. Please let me know why this machine keeps on stopping for more than two minutes while In use.
@Sleeplayground
2 жыл бұрын
Hello, Please check the tubing and mask to see if there is an air leak. Usually, if there is a big enough air leak the machine will stop automatically.
@rubydejesus9119
2 жыл бұрын
@@Sleeplayground Ok thanks for replying but tubing is fine.
@Sleeplayground
Жыл бұрын
@@rubydejesus9119 If the tubing is fine, you should contact your supplier and let them know what is going on with the machine.
@mizchocolit7
11 ай бұрын
How do I clean the inside of the machine e itself
@Sleeplayground
11 ай бұрын
Hi, Thanks for reaching out! CPAP equipment manufacturers recommend regular cleanings. They advise washing out the mask, tubing and CPAP humidifier chamber at least once a week. Rinsing the mask and hose daily is also a good practice that helps keep them clean in the interim. Experts also recommend washing the parts out daily if you are sick.
@TheMightsparrow
Ай бұрын
Would descaler work on my airsense 10 humidifier?
@TheMightsparrow
Ай бұрын
I've got citric acid as well
@Sleeplayground
Ай бұрын
Work soapy water I would say is best.
@NettaMitchell62
2 ай бұрын
What’s that weird tubing you have there
@Sleeplayground
2 ай бұрын
Yes, that is just a standard 6 foot tube.
@observer8430
2 ай бұрын
so dish soap is fine?
@Sleeplayground
2 ай бұрын
Hi, Thank for watching and reaching out! Yes, dish soap is fine I would recommend a mild scented or unscented even.
@markhiggins4452
Жыл бұрын
Told replace filter and mask once a year
@Sleeplayground
Жыл бұрын
Hi Mark Higgins, Replacing the CPAP mask may seem wasteful at first. After all, masks often appear to be in perfect working order even when they hit the standard replacement interval. However, the material of the mask loses its elasticity over time, which causes air to leak. Replace your mask every 6-12 months. Cushions break down and lose their seal over time, so replace them every 3-6 months. Swapping the filters on your CPAP machine is important to continue breathing clean, purified air. Make sure you swap out the filters based on the manufacturer’s recommended intervals. Because CPAP machines use a variety of filters, there is no set time-frame in which to replace them. Some use a two-week maintenance interval, while others will have a six-month interval. Simply follow the recommended replacement time-frames and you’ll continue to breathe clean, healthy air. Hopefully that helps!
Пікірлер: 320