Hello folks! I will show you a new restoration and renovation project of bayonet Mosin system. I bought it at a flea market and I decided to restore it and change it a little. Let's start restoration!
First, I put it in a jar with a rust remover, then took it out, washed and dried. On the anvil, align the bent end of the bayonet and clean the surface with an iron cord brush. The length of the bayonet - about 15 cm, turned out to be a soft part, why? Don't know. I broke off a part and sawed off the rest exactly.
I sharpened the end on a sanding machine, the edges of the bayonet were lightly sanded with sandpaper. Furthermore, I came up with a design for the handle of the bayonet, and carved the handle out of a piece of wood on a wood lathe.
I also made a case, not a scabbard so that I could store this bayonet. I used thin and natural leather. Well, as always, I did a bayonet test. I hope you enjoy this restoration and update video!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #bayonet #restoration
Негізгі бет Тәжірибелік нұсқаулар және стиль Restoration and Renovation of MOSIN bayonet
Пікірлер: 240