These aren’t just restoration videos. I watch random restoration videos when I’m bored. I watch YOUR restoration videos when I want to learn about the history of a computer, how it works, and how I can keep my vintage equipment running forever. Your channel is an endless spiral of knowledge and while I love EVERY video you make, something about your restoration videos makes them stand out from all the rest. I’d never tell you how to run you channel, but know that your restorations are top-tier for a multitude of reasons and many people wish to continue seeing your passion.
@sireuchre
Жыл бұрын
What I notice is the clear focus on the particular failures of the restored device, and when they are common ones, the little explanations of that. Otherwise it would just be just another montage of restoring a device, with 'replaced failed ejector gear' being more of a footnote at best.
@vaughn1804
Жыл бұрын
💯👍
@brusspup
Жыл бұрын
The restoration videos of yours are my favorite. There is an authenticity and charm about them that no one else on youtube comes even close to.
@Kat21
Жыл бұрын
oh hi brusspup, watched your illusions videos years ago
@1MadJack1
Жыл бұрын
@@Kat21 ok
@Ronaldo-eu1nz
Жыл бұрын
Finally its here. YES kzitem.info/news/bejne/q2trvYKwgoR6iII
@1MadJack1
Жыл бұрын
@@Ronaldo-eu1nz ok and?
@WolfgangMahringer
Жыл бұрын
@@1MadJack1 Its a common spam. Report him.
@buserror1
Жыл бұрын
Watching David restore old computers is like watching Bob Ross paint. There's a certain Zen to it...It's oddly comforting to see another person treat something you care about with care and respect.
@raven4k998
8 ай бұрын
I see these videos and wonder what will he do next make a copy of the apple 2 c plus🤣🤣🤣
@MikehMike01
5 ай бұрын
In both cases they’re not trying to impress you and it’s nice
@henryatkinson1479
Жыл бұрын
I really enjoy the restorations. They're always enjoyable. No 2 computers lived the same life, and restoring them tells their story. Your VIC-20 is a prime example of that.
@mitchboynunn
Жыл бұрын
Please don’t let all these other KZitem channels influence your restoration videos. They are my favorite videos you make other then the history of videos. At the end of the day no one is the 8 bit guy but you.
@milk-it
Жыл бұрын
Well said. Just keep doing what you enjoy doing and uploading it for us :-).
@PcVgLife
Жыл бұрын
Atleast do restore videos on new models he hasn't done before. I've used a few as reference for my own restores.
@revine9243
Жыл бұрын
Most of the other restoration channels don’t have what 8-Bit has. Personality. He’s just such a fun guy who has a great personality that makes me want to see more content.
@kelvin1316
Жыл бұрын
The thing with an "arm's race" is to just ignore and do your own thing. Adrian's digital Basement does exactly that with his restorations.
@emmettturner9452
Жыл бұрын
Exactly. Also, the fake channels only prove there is a market for the real thing. If, in response, everyone stopped doing it for real then all we’d have left are fakes!
@Jrose11
Жыл бұрын
Honestly, my favourite are the restoration videos. The fact is, you do a great job not only explaining what's going on, but also the significance. Most other videos either go into way too much detail for people like myself, or don't explain enough what they are testing/why they are doing what they are. I do understand the idea of them getting repetitive though, at some point how many bad ROM chips/blown capacitors can we see replaced. Still they are very relaxing and educational, so I'm a little sad we won't be seeing as many going forward.
@davidsiemers196
Жыл бұрын
Jrose, this isn't Pokémon KZitem, what'cha doin' here? In all seriousness, I totally agree. There's something so wonderful about how David does his restoration videos. They're approachable, relaxing, and it's refreshing to have a KZitemr who isn't playing into the oneupmanship that many others in the restoration space are unfortunately starting to partake in.
@allentoyokawa9068
Жыл бұрын
favorite**
@sanjicook08
Жыл бұрын
Hey Jrose, how's it going?
@SonicBoone56
Жыл бұрын
Holy shit, Jrose watches retro tech channels?
@abvgztooo
Жыл бұрын
Your restorations are top notch, I even rewatch the old ones quite often.
@steventyler6441
9 ай бұрын
Over and over.
@mattsparks3546
Жыл бұрын
Your authenticity, professionalism, and very evident passion for these older computers, (after all, you have developed several games for these older platforms, simply because you like them) is what makes *your* restoration videos incomparable to other restoration videos, there's a feel to your videos that other creators cannot ever replicate. In short, your videos could never compete with other restoration videos, don't let it get to your head.
@mbogucki1
Жыл бұрын
Personally, I think restorations, where there are MAJOR issues to solve, are the best ones. Watching you problem solve in an honest manner, sometimes leading to dead ends, is entertaining and informative.
@adriansdigitalbasement
Жыл бұрын
Two callouts in one video! Thanks. It’s nice to see one of these looking so nice again. Also, seaking of your other IIc, I noticed that one of my IIc machines that I retrobrighted a while back has also started to yellow again. Funny as I have stuff I did longer ago that hasn’t began to re-yellow. As all can imagine, there is no sunlight down in the Digital Basement, so it’s not that.
@The8BitGuy
Жыл бұрын
Well, to be fair. Your videos were a great help in solving both issues!
@TheSulross
Жыл бұрын
Adrian, you and David should do a live chat session together - like the one you did with Bil Hurd - just rap about all things retro computing and inside baseball youtube content creating
@xp8969
Жыл бұрын
@@The8BitGuy disappointed that you didn't say the name of his channel, the 8-bit KZitem Poop channel could have made excellent use of you saying the word basement
@tarstarkusz
Жыл бұрын
But what are the downsides to retrobrighting? I've never done it because I got used to it long before retrobrighting became widely known and, more importantly, I have heard that they are never really the right color again and that it will reverse and yellow again. But this is ancient plastic that is brittle and I have to wonder what the retrobrighting, basically dipping it in bleach is doing to the plastic besides changing its color. Is the plastic leaching anything during the process? Has anyone ever done chemical testing on the water/bleach after the process is done (I don't mean for getting rid of the water. I mean is it changing the plastic)? Are there chemical changes in the plastic? Is it still fire resistant?
@SpearM3064
Жыл бұрын
@Adrian's Digital Basement It's not just UV light that can cause the reaction, it's heat. How warm is it down in the basement? And contrary to what everyone probably thinks, it's not the bromine that causes the yellowing. If the BFRs degraded into a bromide or bromate salt, then they would simply dissolve in water and the plastic would not stay yellowed. Yet that doesn’t happen. Another suggestion is that it degrades into bromine, which would also not keep the plastic yellow. Bromine is a volatile liquid and evaporates very quickly. It is also one of the more pungent smells that you could experience and even little amounts linger. It doesn’t cause the plastic to yellow. The yellowing is entirely caused by the degradation of the ABS plastic.
@Tall_Order
Жыл бұрын
I'm one of those people who enjoys watching you restore things. I'm subscribed to a number of people who do it, with various things, rather it's computers, radios and TVs, pocket lighters from the 1940s, it's fun to watch the process making something old and rusty / yellowed / dirty resemble what it once looked like.
@zenithseeker7
Жыл бұрын
Alps SKCM "Orange" - nice! The other keys were most likely PBT double-shots, because of the vintage, and those don't yellow after UV exposure. Space bars, then and now, are often made from ABS due to its cooling properties.
@StariusPrime
Жыл бұрын
By the way, the keys didn’t need retrobryting because they’re PBT and the space bar did because it’s ABS. Pretty common practice in mechanical keyboards.
@jaysoncowan5763
Жыл бұрын
They should have made the whole computer from PBT, but i love the old IBM metal cases. Those will never need a retrobrighting.
@StariusPrime
Жыл бұрын
@@jaysoncowan5763 I think they generally don’t cast larger parts out of PBT because you risk warping as the plastic cools. ABS is better at that, but the downside is that it yellows over time.
@daemonspudguy
Жыл бұрын
@@StariusPrime that's why. As far as I know, IBM was one of the only companies who made PBT spacebars, and Unicomp continues that tradition. No one else seemed to do it reliably.
@naysmith5272
Жыл бұрын
cool to know. Its interesting the other computer has yellowed again.
@dh2032
Жыл бұрын
@@jaysoncowan5763 rust :-(
@KOrgan0414
Жыл бұрын
You DON'T need to defend yourself for using Petscii Robots as a demo floppy!! If anything, you deserve to plug your hard work a little! Wonderful job, David!
@HOLLASOUNDS
Жыл бұрын
Be cool if there was an Android version.
@Brfff
Жыл бұрын
Like in the "olden days" when running MS Flight Sim was one test of "IBM compatibility" ... these days we use PETSCII Robots to verify retro computer functionality ;) /Brett
@Ronaldo-eu1nz
Жыл бұрын
Finally its here. YES kzitem.info/news/bejne/q2trvYKwgoR6iII
@jaydylantyler
Жыл бұрын
There’s been more than a ‘little’ plugging of the game! The channel felt like QVC for a long time. It’s so nice to get back to some real content now.
@Cemi_Mhikku
Жыл бұрын
@@jaydylantyler You sound as boring and entitled as you look, mister linkdin profile pic.
@tianshi8453
Жыл бұрын
The way you do your restoration videos is exactly what (almost) everyone of your fans wants to see. You don't have to worry for the "competition" (what competition? *g*). Just do them when you want/need to and how you want them to be. It will be just fine!
@npenplz
Жыл бұрын
There's a bunch of fake restoration videos that go around, but I've only seen them for game consoles and such. They are annoying though because they clog any searches for good restoration videos, which pushes these ones to the bottom.
@SquirreliciousMe
Жыл бұрын
The restoration videos are great - it's not about how often you've done it, it's about seeing how you're bringing an old computer back to life - sometimes not working at all, sometimes working but in poor quality so we can see how it looked originally and also how you're keeping computing history alive. I wouldn't worry about any of the competitive nonsense - it doesn't matter what someone else is doing, you've always been authentic and people know it.
@Boojakascha
Жыл бұрын
All key caps but space are made of PBT. Space is made of ABS. PBT tends to move when curing, so it's hard to make long parts. The switches are Alps SKCM Orange and are among the best ever made =)
Жыл бұрын
Praise be to SKCM.
@dc9662
Жыл бұрын
I have one with Amber Alps, which sound and feel fantastic.
@Ronaldo-eu1nz
Жыл бұрын
Finally its here. YES kzitem.info/news/bejne/q2trvYKwgoR6iII
@sean640
Жыл бұрын
And the little metal piece is a stabilizer !
@CommodoreFan64
Жыл бұрын
I have an Zenith Datasystems 286e Supersport laptop with Alps SKCM Baby Blue switches I personally think have a better key feel, but Orange is not bad either. 👍I wish more laptops/all in one computers these days would come with these kinds of awesome switches at least as an extra option.
@PluckyD
Жыл бұрын
Count me in the pro-restoration videos camp. It's sort of like the first step in introducing a newly covered PC IMO. I would also say you do them quite well to begin with. I'll be watching your content regardless, but just wanted to say I've been watching since "How oldschool graphics worked pt. 1" and still love the resto videos too. :)
@ShaunDreclin
Жыл бұрын
Hey I think that's how I found this channel too! It was that or the one on sound, don't remember now
@f.k.b.16
Жыл бұрын
The very slow fade in between scenes when you are putting the keys back on to the keyboard really gives that 80's music an extra pop!
@ericbuell3701
Жыл бұрын
Would literally watch you restore the same exact PC 1000 times. It's not about the specific brand or model. It's about the care and passion you display for each one. I've been watching you for a really long time and your drive to bring old hardware back to life to be remembered properly hasn't ever changed.
@tjaldfeen
Жыл бұрын
Don't worry about the repetitiveness of restoration videos. It's like watching Bob Ross do a painting. I don't know how many happy little trees I've seen that man paint, but I'd gladly see it again. The process, and your thoughts and commentary, it's like having an older brother with a neat hobby that you love to get a glimpse of. Whenever you release a restoration video, I'll for sure be there to see it! :-)
@jmkeller
Жыл бұрын
Well said and a great comparison with Ross. It really is therapy for me at the end of a long day.
@robertsherman7978
Жыл бұрын
That is a PERFECT analogy!!😀👍🐕
@IG88IGLOO.
Жыл бұрын
I really like your restoration videos. It offers up an oportunity to learn a bit about the history of the computer and the innards. I think its interesting to know about what has failed over the years and you do a great job showing that and fixing it especially compared to some that might fix electronics for a quick buck or weird asmr.
@ronsku57
Жыл бұрын
SAME
@Leofwine
Жыл бұрын
Yes!
@Ronaldo-eu1nz
Жыл бұрын
Finally its here. YES kzitem.info/news/bejne/q2trvYKwgoR6iII
@FrecciaBensino224
Жыл бұрын
Me tooooo
@nickwallette6201
Жыл бұрын
I have used the restoration videos as a reference to what the inside should look like, if I’m doing repairs or comparing what I got when I acquired something new.
@misterPSYCHOPATH3001
Жыл бұрын
The restoration, documentary of older hardware and learning how older software works are the types of videos i normally watch when i feel bored or feeling curious, keep up the good work!
@MelancolicoCatrin
Жыл бұрын
Retro restoration videos are therapeutic for me, the way 8-bit guy does them and explains them is the best.
@ExplosiveAction
Жыл бұрын
Honestly I love watching the restoration videos. There is always something new each time, like the electronic eject mechanism in this one. Sure the retrobrite part is the same each time but restoring the mechanics is always fun to watch.
@jeremiefaucher-goulet3365
Жыл бұрын
Nobody makes restoration videos like you do. Please don't stop doing them, they are my favorites!! While I like everything you do, it's still my favorite thing. I was waiting until the end of this video to say "Thank you for finally putting up another restoration video" and then you drop that bomb on us of being weary about them. Damn... If you feel weary, I understand why you may not be so keen on doing them. And obviously, you should only do what you want to do. If anything, don't let other youtubers influence you. Just do your thing. It never was a competition to me.
@SollowP
Жыл бұрын
These restoration videos that you make are so much more than just restoration. It's basically a little history video more than restoration, you go over how they're made, what makes them work, how they differ from other computers and a ton more.
@nfistfu
Жыл бұрын
If I'm honest part of what I like about your restorations are that they're not just "Look I repaired this dirty machine" you actually get into the weeds of things, show us what the system is doing and how things work, and even provide little tidbits of information like history on the machine and what you find odd about it and such like that. You could bring in a machine that's in mint condition and "restore" that and I'd still watch it
@BachiloDmitry
Жыл бұрын
no no no no, even if you will make restoration videos of the same computer 100 times, I'll still watch! Please never stop!
@fffUUUUUU
Жыл бұрын
лапоть 🇷🇺💩 вернись нах запарєбрік
@robertsherman7978
Жыл бұрын
Amen!😀👍🐕
@detrage5483
Жыл бұрын
Nah.
@RengaBeats
Жыл бұрын
its funny.. I don't even watch these to learn how to do this stuff.. It just relaxes me to watch it!!
@martinwashington3152
Жыл бұрын
I 100x thumbs-up this comment!
@mkonji8522
Жыл бұрын
Hey David, I wanted to comment on the clear coat experiment you mentioned. I actually have had great success with this method *however* , only with a specific type of clear coat used for hobby plastics. Initially around 2012 I tried rustoleum clear and krylon clear after doing (what was eventually called) retrobrighting but both of those unfortunately yellowed again over about a 3 year period. After that didn't work I spoke to a friend I grew up with in Japan that does a lot of model building and he suggested *Mr. Super Clear - UV Cut* and I have to say It is the *BEST* at preventing these devices from yellowing after retrobrighting. I've used it on every device I've done since (at least 20 or so different systems and many peripherals) and after about 8-9 years none of it has even begun to yellow. My friend who let me in on the secret has Gundam figures that are known to yellow that he built in the 90's that still have not yellowed. He sold me by sending me an image comparison of new in box ones from 94/95 to the ones he built with the uv clear spray and man is it night and day, white vs golden brown. Process- Please thoroughly scuff up the plastic prior to painting with a red scotchbrite to ensure that the paint bites to the plastic evenly (be sure to get the vents with a flathead and the scotchbrite). When painting do two very very light coats initially and wait about 20 minutes in-between each coat so they can gas out (very important). After apply a third medium thick coat then wait 2 hours to gas out and a finally apply a forth and final medium thickness for matte paint or if using gloss use a heavy thickness coat and wait 24-48 hours to handle to yield best results. Here's the paint Matte- www.hobbylinc.com/gunze-sangyo-mr-super-clear-uv-cut-matt-spray-polycarbonate-hobby-and-model-paint-b523 Gloss- www.hobbylinc.com/htm/guz/guzb522.htm Thank me later ; )
@The8BitGuy
Жыл бұрын
Thanks, I'll look into this.
@watcherzero5256
Жыл бұрын
@@The8BitGuy Yes be careful what you use, many clear coats that 'protect against UV' will themselves yellow for the same reason as the plastic.
@LeoA2600
Жыл бұрын
I never tire of restoration videos of classic machines like the Apple II and Commodore 64.
@Helmutlozzi
Жыл бұрын
I love your restoration vids! Even if they might seem "sameish" the pleasure is just as much from seeing the hardware restored to proper glory again. Thanks!
@dressupgeekout
Жыл бұрын
I can't believe that some people wouldn't trust the NES restoration was real! Those must be the same people who couldn't believe you wrote Tetris in BASIC in a few hours that one time
@misterkumquat7911
Жыл бұрын
Restoration videos, no matter how simple, are my favorite videos of yours. I appreciate this one!
@timmoen1083
Жыл бұрын
I will never tire of 8-bit showing us the weather in Kennedale and then running out to his driveway for some top quality retro Brite. Also, I know nothing about computers. I am here for David Murray. I know I’m not the only one.
@TheKorath
9 ай бұрын
I thought I'd post my thoughts about your restoration videos a year too late. Personally I don't come to them to see the most extreme restorations, I come to them to see the gear I remembered from my childhood getting fixed up and working like new. I bought my first retro computer a few days ago, an old Apple IIe, and prior to picking it up and watching as many restoration videos as I can to see what I'm in for. So more of this sort of content is always better.
@killingtimeitself
Жыл бұрын
i love the cathartic and repetitive nature of the restorations, the music and your narration is always super relaxing, plus its always interesting to see what problems a specific piece of hardware has, even if they arent particularly grueling restorations i enjoy them.
@beastmtl
Жыл бұрын
You are right on spot for me those vidéo are relaxing as equal as interesting.
@SonicBoone56
Жыл бұрын
Right? I like watching tool and toy restorations when I need to relax
@killingtimeitself
Жыл бұрын
@@SonicBoone56 its one of the better ways to relax, especially when its computer related, its always so much more interesting when it comes to the restoration.
@rafaelm.5148
Жыл бұрын
It's like a mix of ASMR, nostalgia, spring cleaning! I love the retro vibe of the music, 80s synth!
@shootytheturtle
Жыл бұрын
I enjoy the restoration process: it is always satisfying to see something old that was once an exciting new purchase and that has suffered neglect and abuse being restored to almost brand new condition. Please continue to include this process in your future videos whenever it is merited. Thanks!
@camwhitehead4440
Жыл бұрын
I love your restoration videos. I don't know anything about OLD computers, but I look forward to every restoration video you put out because I LEARN SO MUCH. If people watching this aren't satisfied or think it's fake, they are more than welcome to make videos themselves.
@GenXHippie
Жыл бұрын
I worked for Apple in 1987 and 1988. Watching you restore the old girls fills me with joy. If you stop doing them, that's fine, I'll just go watch them restored somewhere else. How many times can I watch you do the same thing? Every time. I worked on a design team and see some of my old ghosts when you do these, so yeah, I'll watch every restoration you decide to do.
@dark0hannibal
Жыл бұрын
Those who are in the modeling hobby can tell you that there are varnishes for plastic that protect from UV light and contact with oxygen from the environment. They are also extremely easy to remove using alcohol and rubbing if you don't like the finish. Some products that I recommend are the MR. SUPER CLEAR UV CUT and MR. SUPER CLEAR.
@rudeskalamander
Жыл бұрын
WHY ARE YOU YELLING
@retro8696
Жыл бұрын
@@rudeskalamander I don't think UV does anything to these I had a super nintendo that turned yellow and it was in a box in a dark room with no UV light and it still turned yellow I just think the Yellow happens from time.
@rudeskalamander
Жыл бұрын
@@retro8696 why did you ping me lol? I was just commenting on the fact that the product names listed by op were both all caps
@vinnycordeiro
Жыл бұрын
Spacebars usually are made of ABS, while the other keycaps are made out of PBT. PBT doesn't yellow with age but has the tendency to easily warp immediately after injection molding, so manufacturers usually only made the smaller keycaps using this material, using ABS on the spacebars simply because it's easier. And those are salmon ALPS key switches, if I'm not mistaken (it has been years since I was into custom mechanical keyboards). You can only remove the metal plate by desoldering all the switches.
@AtariBorn
Жыл бұрын
Interesting tidbit. Thanks.
@EvergreenTheTree
Жыл бұрын
I believe those are ALPS SKCM Orange key switches (Deskthority's article on the Apple IIc series of computers confirms this), which are the SKCM variant of tactile switches.
@TommyFenstermacher5150
Жыл бұрын
@@EvergreenTheTree Yeah, those are orange Alps. Salmon Alps were their successor.
@mrchom
Жыл бұрын
I like restorations when they're partially about the uniqueness of a machine, or how the internals worked, or even odd form factors. They're just another way of visiting why something was special, and getting a glimpse of how it would have looked 30+ years ago
@HypherNet
Жыл бұрын
I will never be mad at you showing off your own software. Or charging an amount so you can pay yourself fairly. You're insanely talented and probably a little too humble for your own good. Great work, as always. The iic was my first computer, and it takes me back to a lot of great memories with my late stepmother who wrote games for small children for the early apple computers.
@bobris
Жыл бұрын
You say "don't get mad" but I don't think you have anything to apologize for. Great video, thanks for sharing.
@lis6502
Жыл бұрын
David obviously takes care about what others are saying and there were some comments on him sticking his game whereever possible ;). I think that he might as well print posters of PR and Planet X3 making them as a background of all upcoming videos because there defienetely IS something to be proud of.
@lis6502
Жыл бұрын
13:36 as much as you gonna do it :) There's a difference between "another restoration video" and 8-Bit Guy's restoration video :) Your videos were at the very start of series somewhat educational slash entertaining, nowadays there isn't much to be told (disassemble, gather dirt and do retrobrite), yet it's still very satisfying to watch. So as long as pure entertainment and idea of saving these artifacts from scrapyard are concerned, you should keep posting ^^
@tassadoul
Жыл бұрын
I've always seen your restoration videos as more of a teardown of how and why the computers work, with a pinch of history mixed in. The actual restoration is more like a "happy ending" for the poor machine. Like a makeover.
@mightymattd8822
Жыл бұрын
For what it's worth I still enjoy the restoration videos. Each computer is different so there's enough variety that I don't get bored by them.
@elduderino1287
Жыл бұрын
I LOVE your restoration videos, I neverget tired of watching them. Forget what other people are doing, keep up the great work.
@ToumalRakesh
Жыл бұрын
I enjoy the restauration videos. I don't care if they're "less fancy" than what other youtubers produce, and it's been fun to watch you learn and grow over time. I'm glad this channel has a little bit of everything, and not just one type of content.
@eroc1024
Жыл бұрын
Please don’t stop your restoration vids. They are so relaxing to watch. I mean dig all your vids but those really stand out.
@DerekSmit
Жыл бұрын
I like the restoration videos, especially when there is a technical problem, because you take use the viewer along the ride of finding out what's wrong. It's a nice mix of learning and just watching someone skilled do his thing. It's the same reason I like watching people with great carpentry skills build something out of wood. It's a skill I don't have and enjoy seeing people do. I think it's why a lot of people enjoy sports.
@mrb5217
Жыл бұрын
David, to get those Alps keyswitches out, you'd need to desolder them all, then the PCB will come off the back and then the switches will snap out through the front of the plate.
@cheezitupp
Жыл бұрын
Love restorations though, definitely have re-watched your other restorations. Your videos aren’t fake and you always do the best you can. I enjoy learning alongside when you find out you can’t use a certain retrobrite technique or when you learn certain chemicals don’t work. I love the experimental process because your videos are very down to earth and real. Love your videos, keep it up!
@DragonBlue68
Жыл бұрын
Brings back memories😁 I had an Apple IIC back in high school in the 80s. The memory was boosted, had the Apple green screen monitor, "clone" external floppy drive, and "color" (black/red) dot matrix printer to go with it. Used it up until about 1994. Back in the 80s, Apple ruled our school district... Apple II, II Plus, IIE, Lisa, and Mac were about the only systems in use at my high school.
@yas1945
7 ай бұрын
I really enjoyed this. When I was a kid I treasured my IIc far too much to "risk" open it up, unlike so many other electronic devices. Only many years later did I start tinkering with and re-assembling hardware. Thanks very much!
@RudeFoxALTON
Жыл бұрын
Personally I love the restoration videos, especially when there's some kind of technical problem where you do hardware diagnosis. It's like a puzzle/mystery but more fun since I dont have do the work to solve it lol.
@w2ed
Жыл бұрын
I wouldn’t worry about “competition” with your restoration videos - many of the ones I see offer little to no commentary about their experiences, the hardware involved or what they are doing, whereas yours (and a few others I like) offer those insights. I would rather watch one of yours because of that. Keep doing what you do.
@detrage5483
Жыл бұрын
Same shit over and over and over and over and over and over and over and over and over and over and over
@w2ed
Жыл бұрын
@@detrage5483, if you think he's just repeating himself, if you don't like what he does, watch something else. He gets enough statistics that, if it really is a problem, it will show in his viewership and - regardless of what you and I say - he can choose what to do about it. I voiced my comment because of one thing that bothers me, when creator's come on their videos complaining about a type of video and then defending himself for what he does. HE DOESN'T NEED TO DO THAT - what he does compared to the other repair and restoration videos I usually also watch is he puts himself, his home and his stories into the equation. I have a better understand of why he retrobrites (not sure if spelled correctly) and does what he does better than I do other creator's, and when I get the money to tackle projects like these, I'll have that to reference. He does enough to make his videos stand out that he doesn't need to cut those type of videos back to avoid being competition or being repetitive. Sometimes letting someone know their positives can help rest concerns or understand how they can improve what they are uncomfortable with.
@alpzepta
Жыл бұрын
Most people creating video the most modern way possible while David do it using the 80s 90s style which is my prefer
@therealScopolamine
Жыл бұрын
Rare to find people like David who don’t shit out low quality videos everyday with the intention of revenue. He takes his time and uploads infrequently to focus on quality over quantity. Love it.
@gnarlin4964
Жыл бұрын
It doesn't matter how repetitive restorations are. The only thing that matters is that each is a new retro computer you've saved. Would saving yet another suffering abandoned pet be too repetitive? I'm aware that this is hyperbole, but I think the point works. Old computers will quickly become rarer and rarer so each one that is saved and preserved today will become that much more important in a few decades or even centuries. It's not about competition, it's about preservation and there is just something soothing about seeing something neglected getting the love and care it needs from a competent restorer. Please keep making restoration videos. They are my favourite.
@andrasbradacs6016
Жыл бұрын
I think you just can’t do bad videos no matter what topic you choose. And I think the retrocomputer repair community can thank you so much because of the exploration of retrobrighting process. Keep up the good work, I will watching your videos! 😊
@EndOfForever
Жыл бұрын
It's a good day when an 8 bit guy restoration video is uploaded
@Cr0ssUP
Жыл бұрын
Your restoration videos are the main reason why i subscribed to your channel. Most retrobrite restorations i've seen dont have the same level of passion and love for these PC's like you do. Your care and attention to detail really shines but most importantly these videos are extremely relaxing with chill vibes. I hope this comment encourages you.
@TechDeals
Жыл бұрын
David, please don’t stop…. I love watching your restore videos, I watch them all several times. Your pacing and how you show things is lovely,
@TheRogueMaverick
Жыл бұрын
SOOO worth supporting you on Patreon! You are, without hesitation, my absolute favourite KZitemr! I remember discovering you in late 2016 and one of the first videos I watched was the one on early digital cameras like the Sony Mavica. It’s been fun watching you grow as a content creator! I joined when you were somewhere in the 400k subscriber range and now, at the time of writing, you’re at 1.38 MILLION! Keep up the amazing work! I’m sticking around for as long as KZitem exists!
@B3Band
Жыл бұрын
I'm genuinely curious what your feed looks like then lol
@HisVirusness
Жыл бұрын
@@B3Band Same. Anyone who has The 8-Bit Guy in their feed is obviously a person of culture.
@HOLLASOUNDS
Жыл бұрын
Good for you.
@TheRogueMaverick
Жыл бұрын
@@B3Band - It really depends on how many videos I’ve rewatched. But I have had many videos come up in my feed before! What really drew me to the channel was and still is his impeccable ability to be technical and complex while making it more friendly to understand! I’m a tech-minded person and I still can get hopelessly confused by some topics. One example of The 8-Bit Guy helping me was when I was watching some “Behind The Code” videos from Displaced Gamers. Thanks to 8BG’s video on Assembly/Machine Language, I was able to understand the videos a little better with the coding language they used. I’m familiar with some coding, particularly in BASIC, but I’m still very much a newbie.
@Markimark151
Жыл бұрын
As much I love vintage Apple computers, I hated their motorized floppy drives since they lack a manual eject button and they often get stuck! Our school’s Macintosh classics had their disks stuck because of the design flaw.
@thelaughingmanofficial
Жыл бұрын
Computer Restoration videos always give me a cozy feeling even if they're not exactly cozy for the person restoring and cleaning the computer.
@dave4shmups
Жыл бұрын
I agree with you about not getting involved in any kind of retro computer restoration competition on KZitem. You always do a fantastic job and your videos are a blessing to watch!
@GenericJeebus
Жыл бұрын
Honestly while I do love pretty much every video off this channel, the documentaries, the unboxing of donations, I especially loved the studio and original dream desk builds too, I think the restorations have always been my favorite as well, there's a particular style to the explanations on troubleshooting, and the methods to solving each problem that I've always really enjoyed since I started watching back in 2015 or 16 or so. It got me into working at restoring old tech I've either found through work or storage from family, and I'd always found them extremely helpful and entertaining.
@PatrickM-dm6sf
Жыл бұрын
Midnight on the East coast, screw it I’m in.
@ZachryMedearis
9 ай бұрын
Why would anyone get mad at you testing your own game on the device? You made a freaking game (more than one) and you should be proud of it.
@RedGr33nBlue
Жыл бұрын
got busy with work so didn't have time to watch alot of 8 bit guy but it was a blessing in disguise because it's so good to binge watch these, always a blast to watch. keep up the great work, love these restoration videos
@lishd
Жыл бұрын
I could watch you restore computers for 12 hours a day without getting bored of it. I would enjoy a constant stream of watching you competently being detail oriented while making things cleaner and better than they were. You are my "lo-fi beats to relax or study to". ^_^
@0fuxTaken
Жыл бұрын
I enjoy the restoration videos. They certainly hit the "oddly satisfying" spot. I don't watch any other channels for such content.
@mybrainisshortcake
Жыл бұрын
I remember some of these Apples looking that dirty back in 1990! So satisfying to watch. I grew up around *three* Apple II labs, IIe, IIc, IIgs. Great memories.
@fatyg5682
Жыл бұрын
I personally enjoy the restoration videos with diagnosing broken parts and fixing them, however, just watching any restoration video is great. I hope you keep doing them, but do what you gotta do! Thanks for the content.
@ellesmerewildwood4858
Жыл бұрын
I'm not a programmer or into computers in any big kind of way but I do love restorations. As a restorer myself, been restoring for 40 some years, I can always spot a fake. Sadly, you're right, there are so many fake restorations and restorers on youtube trying to out-do each other with all kinds of restorations. On the flip side, there are also many true and brilliant craftsmen/women out there working real magic with their skills. So far, I've never seen you fake one, so as far as I'm concerned keep up the restorations.
@alt842
Жыл бұрын
What do you restore? Just out of curiosity
@ellesmerewildwood4858
Жыл бұрын
@@alt842 Classic car instruments. Old school instrument guy. Don't go near any of the new car instruments, I don't have the deep electronics know-how or the software. Just the classic mechanical instruments. So I love watching restorations because I'm never above picking up a new tip or a trick from someone else.
@Vaskomyr
Жыл бұрын
Just love seeing the restoration giving what ever you're working on new life. Shouldn't worry about other channels or people making ridiculous claims that you fake it. I've seen those ones and they are terrible especially when it's a newer item that is obviously intentionally damaged just so they can make a video. Just keep doing what you do and know we appreciate you and what you bring.
@ridiculous_gaming
Жыл бұрын
All I can say is what a wonderful piece of technology. Such quality to run decades later unlike today's electronics.
@infinitecanadian
Жыл бұрын
Your restoration videos aren't a competition; they are an important part of the series.
@nopenottalib4366
Жыл бұрын
Hell yeah - an 8-Bit Guy upload! THANK YOU!
@beeftacosss
Жыл бұрын
Happy to see more restorations, honestly some of the best content here, keep it up!
@Collinsfamilylights
Жыл бұрын
Don't let other KZitem ass hats change what you do I enjoy watching your restoration videos thats what got me into watching your channel.
@party4keeps28
Жыл бұрын
There will always be detractors but it's obvious that you're an honest person and take your work seriously. I appreciate what you do very, very much.
@PerfectPilot
Жыл бұрын
I LOVE these restoration videos! I can’t wait to watch
@Dukefazon
Жыл бұрын
I found an old AT keyboard (no Windows key) at my local fleamarket, it had some plaster spilled on and the both ENTER keys were not working (looked like they were stuck down or something), I bought it for about 25 US cents (current exchange rate), brought it home, it was perfectly fine, only the spacer thingies were missaligned under the two ENTER keys. Took it apart, washed, then retrobrited the top of the case and the keys and now I have a beautiful retro keyboard for a quarter of a dollar. I'm so happy that I found your channel all these years ago and inspired me to do this kind of a work, it was so satisfying even for a little old common keyboard.
@finkelmana
Жыл бұрын
Since so many of us like the restoration videos, keep making them. If people dont want to see those videos, they dont have to watch them.
@glitchedmac5969
Жыл бұрын
This is the only Apple // I've ever personally owned and still have! I've done so much to keep it preserved and functional. I absolutely love watching this beautiful machine get the love here :D
@wysiwygscomputerrepository4905
Жыл бұрын
David! Love these restorations, but something stood out to me about this one that could've been improved, if just slightly! The Apple logo on these machines, at least from my experience with most other Apple products, usually has a small hole in the back side of the logo on the underside of the plastic. This is so that it can be removed and changed if needed, but also really helps when it comes to whitening these plastics, as the logo often times (in your case not *too* bad) will bleach along with the plastic!
@Octamed
Жыл бұрын
I noticed too. It's definitely lighter. Probably worth covering with paper tape or clear coating just the logo (the paint is VERY flimsy as I found out when cleaning mine)
@pulsatingsausageboy2076
3 ай бұрын
Beautiful! I love seeing old machines like that restored.
@ThorstenWieking
Жыл бұрын
Watching your restoration videos plays for me in more or less the same league as many Adam Savage videos. Watching a person creating/enhancing/repairing/restoring/preserving something with their hands, dedication and knowledge. They are motivating and inspiring.
@Valdaemonium
Жыл бұрын
One of these reasons you've got to do these restorations, I may bet which is: the love and achiving excellence in everything you do for classic techs. Thanks for this!
@discingaround
Жыл бұрын
Your restoration videos are my favorite. Fantastic job!
@mackenziemcintyre1378
Жыл бұрын
My old computer teacher before he retired let me play around with his IIc was way different than I expected considering I mostly did hobby stuff with a 98 PC and he inspired me to get my XT and mac plus
@fruit9441
Жыл бұрын
your restorations are special because you actually explain what youre doing, what it means, and how the computers work. that makes it such an interesting experience AND i learn more about computers/technology. id watch you restore ANYTHING
@paincreatesfame
Жыл бұрын
Echoing a lot of the other comments here but I love watching the restoration videos! It's always so satisfying seeing the backstories behind these machines and watching them being restored to their former beauty. I never grew up with most of these things so it's also just cool to see what came before my lifetime and how things have aged after so many years.
@McTroyd
Жыл бұрын
I was blown away the first time I saw one of those 3.5" drives eject a disk itself (on a IIGS). Must have cycled that drive dozens of times before I got bored. Haven't seen the broken gear phenomena yet, but good to know to look for it! 👍️
@lucasrem
Жыл бұрын
My original Macintosh did that, this apple II model is newer than that, they used the same mechanisms. for me it was normal, drives that did not do that were old crap drives, LOL
@vladimirpopoviclipovac9689
Жыл бұрын
Restoration videos are kind of meditative. They provide the similar calming effect. While they might benefit from novelty, they will certainly not suffer without it. They will never get old, no matter how similar they are.
@trashpandatee
Жыл бұрын
Your restoration videos are the exact reason I stumbled upon your channel, and how I learned the term 'retrobrite'. Please keep these videos coming, you do have fans that love to see them, please don't feel like you need to compete!
@JayCAlan
Жыл бұрын
I love the restoration videos! There is just something absolutely comforting about your process of tearing down, cleaning, and re-assembling. I just love seeing them cleaned and restored. I think it's the same reason I like the Hoarders shows, watching ickiness become clean somehow makes me feel better about the world or something. Keep it up, please! I promise to watch every one.
Пікірлер: 2,3 М.