From one father and husband and homeowner to another: great to have a short video from you, I do appreciate your time spent in recording, editing, etc. Thanks. You rock!
@shephherd
2 жыл бұрын
I can't tell you how pleased I am to see you only brushed, cleaned, sharpened and oiled - and did not take it apart and 'restore' it to a gleaming state :)
@anthonyh1956
2 жыл бұрын
Wonderful to have you back (as oft’ as obligations will allow). Nice to see an old tool revived and used. I’ve watched all you videos over the years and if you have a website, might suggest a synopsis article or two on apartment woodworking and insights on it.
@glenmatthewwilson
2 жыл бұрын
What a great tool! I was happy to learn that you can soak rusty tools in boiling tea to convert the rust to magnetite. The magnetite is much more stable and resists further rusting. Maybe fun to try on other old tools. Happy to see you back!
@jbtoki9979
2 жыл бұрын
I think the blade says, Made in 土佐 (Tosa) in Kōchi (Shikoku Island). Made by 善之助? (Zen-no-suke). Not sure. Made with 安来 (Yasuki) Hagane.
@Lemongrasspicker
Жыл бұрын
Thank you so much for writing that out.
@mattevans-koch9353
2 жыл бұрын
Nice to see an old tool resurrected. You might look for some rust treatment used in the steel boating industry. It is used to neutralize the rusting action prior to painting; very similar to bluing firearms. The nata reminds me of the hewing hatchet used in green woodworking which also is flat one side and beveled the other. Thanks for the video. Now go get that young man started on woodworking.
@Lemongrasspicker
2 жыл бұрын
I'll look into that thanks for the recommendation.
@connorhart7597
Жыл бұрын
I've found with using the wire brush for surface rust, using the vinegar helps act more like honing solution on a diamond stone. It kinda helps keep the dust out of the air and helps clear it away from your work surface, if that makes sense. Not the only way to do it, just figured I'd give my input. Sick tool man, I know I'm late, but yeah I'd love to see more content using this thing
@BenKingEagles
2 жыл бұрын
I highly suggest you get a container of EvapoRust. I use it for all my old tools and it works wonders. It also has the added benefit of leaving a safe film on the metal that will continue to protect it against rust. You want to follow up with light oil regardless, but evaporust is great stuff.
@AdventuresInDIY
2 жыл бұрын
I love it!! Looks great with the patina. I'm always eyeing those on ebay. One day :)
@charliekingpine3893
2 жыл бұрын
Hi good to see you again, in England that would be called a Billhook very useful tool with greenwood. The one you've got is a handy size, most Japanese seem simple but that are simple the best., Thanks for sharing it with us
@bens2573
2 жыл бұрын
Great to see you! What a cool and useful tool. I've always thought axe/hatchet carving feels awkward because I'm used to splitting wood with it. Would love to have something like a Nata.
@vladimirkovacevic1656
Жыл бұрын
awesome video,i love Nata so much
@thebigredwagon
2 жыл бұрын
I’ve started getting into Japanese tools. My chisels are razor sharp but I cannot get my kanna to work properly. My pubic hairs can shave wood better than what I’ve got. How did you learn to tune your kanna?
@Lemongrasspicker
2 жыл бұрын
Trial and error honestly. The best thing I ever did was try sharpening a completely different way.
@thebigredwagon
2 жыл бұрын
@@Lemongrasspicker I’m having alot of errors. It’s like trying to plane with a brick.
@Lemongrasspicker
2 жыл бұрын
@@thebigredwagon is it just not cutting at all? Or are the shavings wonky?
@thebigredwagon
2 жыл бұрын
@@Lemongrasspicker it is cutting but the shavings are so thick I could build you a sturdy ship out of them. I’ll keep trying. I’ve watched so many Japanese tutorials i’m fluent.
@matthewbrady5214
2 жыл бұрын
Cool tool
@jamiefigueroa
2 жыл бұрын
I want to start woodworking. I'm thinking of making a small wooden box for my pilot projfct. Something of the size of an iPhone box to serve as a kit for my things. What tools and wood would recommend for me to use?
@Lemongrasspicker
Жыл бұрын
What tools do you already have? If you want to start a ryoba saw, medium and small (24mm and 10mm) chisels, 450g weight hammer and a sharpening stone around 1k-5k is a good place to start.
@JoshIbbotson
Жыл бұрын
Just wanted to say, miss your videos, hope you come back! Family first though of course.
@deathkid411
Жыл бұрын
what is a Japanese jack plane? I am new to would working and thought I would try this still to see if I like it more
@Lemongrasspicker
10 ай бұрын
I'm not sure what you'd call a jack plane honestly. I just refer to them as kanna in general.
@restorationconstantines7731
2 жыл бұрын
Best👍
@paeduuka64
Жыл бұрын
I hope, I see you soon. Your Videos are very interesting!
@iaintheater6027
Жыл бұрын
You should try making Yosegi-zaiku it's a japenees wooden mosaic style, just look it up maybe you can add it to your guitars?
@Lemongrasspicker
10 ай бұрын
I've seen that type of work and it's very pretty. I've actually had to stop doing guitar work at home. It was becoming far too much of an unnecessary stressor
@robertward9533
2 жыл бұрын
It’s a gardening and forestry tool so it works best on Greenwood so no one judge the kiln dried lumber
@Lemongrasspicker
2 жыл бұрын
It's not going to hurt anything to use it on a 2x6. It was just to see how the edge was.
@thebigredwagon
Жыл бұрын
They are used for green wood.
@Lemongrasspicker
10 ай бұрын
Yes
@tigacub
Жыл бұрын
Can you make more videos
@Lemongrasspicker
10 ай бұрын
Yes
@josephlaviolette146
2 жыл бұрын
Well, off to find a left handed tool that doesn't exits!
@Lemongrasspicker
2 жыл бұрын
You could probably regrind one to a lefty bevel pretty easily I think. Or set it up like an axe with a convex grind.
@garymosier1239
2 жыл бұрын
I hope you and your family are well. I look forward to your videos. Thanks
@robertward9533
2 жыл бұрын
Get a higo
@Lemongrasspicker
10 ай бұрын
What?
@robertward9533
Жыл бұрын
It's for limping trees. There are very few until the bush craft Era. As if the Japanese don't have axes.
Пікірлер: 48