Excellent tutorial on Resuming a Failed 3D Print Using Cura. Essential skill for anyone with a large volume printer.
@sim-racing2277
2 жыл бұрын
Thank you. I hear some users with the BL Touch are having issues doing this so it’s probably for old school manual height adjusters like me :)
@greerengineering
Жыл бұрын
Thanks for this great video. Helped me save a print after the controller reset.
@superninja396
Жыл бұрын
thank you for this video. I was running low on filament and i really didn't want to start the print over.
@sim-racing2277
Жыл бұрын
Glad I could help!
@lilqueeniescraftingismypassion
Жыл бұрын
I am struggling to do this, any help would be much appreciated, following the steps I can do but when I try to save it from notes it won't save as a g.code what am I doing wrong?
@UltraJorgos
Жыл бұрын
Ìsn't it .Gcode?
@antonioscrittorale1718
2 жыл бұрын
Hey I'm in need of help, I am trying to do as you explain in the video in Cura but my version of Cura (4.12.1) does not let me edit or move anything and it tells me that " PRINT SETUP DISABLED. G-CODE FILE CAN NOT BE MODIFIED" I have the z-offset plugin installed . What do I do now? HELP PLEASe 48+ hours into my print and the power went out less than 10% left to do.
@sgtkill
2 жыл бұрын
Hello, I am new to 3D printing as well but the only way I’ve figured out how to bypass that error is by downloading the print again, entering the exact measurements you used on your original print (I take photos of my measurements before I start printing) and then you can follow his steps. I just finished doing this myself. Hope it helps sorry it is probably not the easiest method
@sim-racing2277
2 жыл бұрын
Sorry I missed this. Have seen a similar problem once and as @average gamer said, the file might have become corrupted due to the power outage. I always ‘save project’ in Cura now so I can always load it and regenerate a fresh G-code file quickly if the old one is gone or damaged.
@richardbail4890
2 жыл бұрын
Awesome awesome, thank you Soooo MUCH!
@sim-racing2277
Жыл бұрын
You're welcome!
@danielaaguilar1655
2 жыл бұрын
Perfect!!! Thank you so much saved me so much time and filament!!!👌🏻👍
@sim-racing2277
2 жыл бұрын
Great to hear! Me too. I was so sick of all the wasted time and materials.
@TJFeik
Жыл бұрын
This was very helpful! Thank you so much. The "skidmark" priming line almost took out my existing print but I was able to stop it and go back in and adjust the settings. Awesome video.
@berdineluscherberry4801
2 жыл бұрын
Thank you for this tutorial. I don’t have the same menu as you do on the left hand side to sink the object into the build plate… just the standard “move, scale, rotate, mirror etc” how do I change this?
@Gaudy_Azk
6 ай бұрын
Not all heroes were capes, you save my day
@IlanPerez
3 жыл бұрын
This was technically helpful. Alas i coudln't get mine to restart properly because I have a BLTouch. :( Anyway
@sim-racing2277
3 жыл бұрын
Right ok. Yes I’m totally running manually.
@olhakesta
2 жыл бұрын
Dear fellow: thank you very much for this great video and tutorial. You saved me time and filament and taught me the trick for new situations (I hope there isn't, but...) Well done!
@sim-racing2277
2 жыл бұрын
Good to hear and happy printing.
@TheR00Z
2 жыл бұрын
I dont have Z offset setting :/
@sim-racing2277
2 жыл бұрын
Check because you should be able to enable it in the Cura printer settings options. It will then appear in the settings window pane.
@AMLagonda
2 жыл бұрын
you really kept the bed hot for 20 hours?
@sim-racing2277
2 жыл бұрын
Yes the print was still running with no filament coming out so I paused the printer but maintained the printer bed temp and then continued printing. I’ve also done it from a cold bed and let it heat up and print again.
Пікірлер: 25