Fixing, detailing, improving a low KM Mazda3 Maxx Sport (BK series, 2005) for grandson. One appeared to require a new battery. I disassembled the remote to access the battery and as it was face down, thought I better take it out and check it definitely was a CR1620. I probably contributed to the issue, but not putting the low voltage battery back in and ventured out to get a replacement. A nice bright red LED when the buttons are pushed, but that was all she wrote. Ignition wise, it would start the car, so this was a remote connection/sync loss. This short and precise video tutorial saved the day. Many thanks. A cheap sheet has been written up (including observations of the warning beeping for this car) and placed with the owner's manual.
@garethwiltshire7490
3 ай бұрын
I just did it after 2 days of the remote thar stopped working and now it works . Thank you mate. Have a blessed day .
@Christianperonis
2 ай бұрын
Absolute legend. Worked a treat with the wife's car after it randomly stopped working!
@bigmikemustang66
3 ай бұрын
Thank you! It worked perfectly.
@TheSnackerer
3 ай бұрын
Hello, could I ask you for some advice? Following the above procedure, I get the car into programming mode, but after I press the lock button twice on the new unpaired remote nothing happens. Do you know what it could be? Thank you.
@sandratracey1235
2 ай бұрын
Same problem here. My car came with a plain key, no remote functions. I bought two remote fobs from Amazon, and have tried this procedure dozens of times with no luck.
@crispybacon91
Күн бұрын
What do i do if both keys are unpaired?
@weeebie
4 ай бұрын
holly hell it worked.. for better of ½ a year my remote only semi worked and dont work lol.. i thoat it was broak or battery ran dry.. so i change batteri but that made it even more wanky.. so thoat it was broake.. so used normal key hole to open lol.. stumpel on this will looking up how too change factory radio with a 2din frame.. and now it works again lol.. i feelt soo stupid open closing door and such but lol .. i will newere laff at ppl ther turn watter on and off x times lol
@markmummery8765
Ай бұрын
Any idea why on my 2011 mx5, 5 button fob the boot release button does not open but the button next to it works??
@bruce6364
5 ай бұрын
Nice. Thanks for making video. I have couple requests for you. I have 2014 Mazda CX9 and wanted 1) to get all doors unlocked when I turn off ignition so i can access back seat and truck for unloading. 2) When unlocking from keyfob, I want all doors to unlock by pressing unlock first time, not defaulted twice. Would you mind finding programming instructions for me please?
@Nielutz
3 ай бұрын
And what's the process if you only have one key?
@PoorImagination
15 күн бұрын
real question right here
@simontowell
5 ай бұрын
I’ve done this and it works but the boot release no longer works. Any ideas please?
@paulgriffin4745
5 ай бұрын
Great video Question? When I finish the open door part of the procedure - my locks cycle I think 3 times - is this telling me of a fault with the actual car. The keys after completing the procedure do not remotely lock or unlock the car still. 2011 Mazda 3. No boot release on my key fobs.
@FobFix
5 ай бұрын
Does double clicking the keys after placing the vehicle into programming mode cause the locks to cycle ?
@Miller__197
5 ай бұрын
It worked 🎉
@emilkatzarski4215
8 күн бұрын
What about the keyless version with a start/stop button?
@FobFix
8 күн бұрын
We are currently working on a Mazda prox programmer. It *should* cover Mazda 2,3,5,6 and MX5 Prox keys and will be due out soon. Its an extension of our existing MX5 prox programmer, modified to suit other models.
@Fynzou
2 жыл бұрын
I did this, but the locks didn't cycle after I closed the door 3 times. Do I have to open it a certain amount? When you say turn the ignition on 3 times, do you mean to the "On" part, where the radio and such works, or do you mean like, actually turn the car on?
@FobFix
2 жыл бұрын
Just do exactly the same as the video.
@gazzathegreat7820
Жыл бұрын
You have to open the door at 70mph then fling yourself out ..... after that you won't need to fix your key .. 🤕🤕 ( just your head )🤕🤕🖕 xxx
@anotheryoutubed
7 ай бұрын
@@gazzathegreat7820 🤣🤣🤣🤣🤣
@af252
2 жыл бұрын
Can you tell me whether the door handle lock cylinder can be rekeyed or if it’s sealed shut?
@FobFix
2 жыл бұрын
It can be rekeyed with the correct tools/knowledge.
@af252
2 жыл бұрын
@@FobFix simple Enough with a KZitem tutorial and some DIY skills?
@wildscorpion73
6 ай бұрын
Both of my remotes cant be programmed even i enter programming mode. Both worked until i had to change batteries in them. Both sending waves on 433 Mhz so they are operating just refuse to be programmed in programming mode. What could be cause of this?
@FobFix
6 ай бұрын
Thats either an environmental issue (neighbour has a faulty wireless doorbell), or a coincidental fault with the receiver in your vehicle.
@darrenhodgson6163
Ай бұрын
@@FobFix The old stuck on 433Mhz flood can be such a issue, for more than just that. Well pointed out.
Пікірлер: 30