I do like the sleeper esthetic, but personally I'd get one of those ide to sata boards and have kept those floppy drives and the retro disk drive. Starting up the PC with all the correct retro sounding components that's still fully functional.
@walterlegere1403
8 ай бұрын
I tried using those IDE to SATA converter boards and they didn't work. I tried them on several different drives CD and DVD drives but no go! I don't think they are even real.
Very nice! I would have painted the entire case beige to really give it a retro look
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@hosikkim8066
11 ай бұрын
Wow, I watched it without any pause or skip. why is it so interesting
@ZoruaZorroark
Жыл бұрын
imagine someone from 30 years ago watching this
@FalseOracle617
6 ай бұрын
This is one of the coolest videos on YT, so freakin satisfying.
@nasilemak868
10 ай бұрын
Used to do these pc modding in the early 2000s, lol
@qwertNickqwert
Жыл бұрын
Water cooling magically swaped to deep cool 🙂
@pcmod-1
Жыл бұрын
😂😂
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@iam4740
9 ай бұрын
What is a "swape"? OR is it "swapped"?
@fayne1
9 ай бұрын
@@iam4740at the end you can see that the white AiO is swapped out for an black Deepcool one
@bhume7535
10 ай бұрын
Lmao. I've had one of these as a footrest for the last 3 years. It has a Core 2 Duo e8600 and GTX 275 in it. I often compare steam game requirements to my footrest as a joke.
@xxx-lq7ho
8 ай бұрын
It look like small Aircon I like it looks Cool pun* you very good at making things
@MarkHallG
10 ай бұрын
The sound it makes makes me think the fans are not secured correctly and they are producing a little bit of rattle.
@iamstrom518
Жыл бұрын
keep up the good work brother
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@thecarkidonyutub
10 ай бұрын
Such a cool video I like it allot! 10/10
@UzmaN345
10 ай бұрын
Keşke kapağın ortasını kesip temperli cam ekleseydin 👌
@S1eepM0de_Forever.
6 ай бұрын
Does it run good? We should get a review.
@verovieira1
10 ай бұрын
Beatiful case !
@MrAli3433
10 ай бұрын
Beautiful 😍😍😍😍
@ammi74656
10 ай бұрын
Very good Job.....👍🏻👍🏻👍🏻🇩🇪
@dreamshooter90
Жыл бұрын
Beautiful case and PC!
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@dannygrant251
3 ай бұрын
Subscribed 👍🏻
@СоловьевСергей-ш6д
10 ай бұрын
Неплохая идея и воплощение, но почему не сделал стекло боковое???
@mikedasneves
10 ай бұрын
Why not a Ryzen 7600 + DDR5?
@curvingfyre6810
10 ай бұрын
SHould have gone with air cooling so you could keep teh expansion bays, that's like half the value of an older case like this, genuine shame.
@schnitzelsamy
Жыл бұрын
Cool
@intuitivesafehaven
Жыл бұрын
on 13:27 what is the name of those screws you hammered in the top of the case????
@rohon4972
Жыл бұрын
they are pop rivets
@marcw2604
7 ай бұрын
What Retro Case is this i had a non tower Flat Case that looked kinda like this one.
@hitesh2348
10 ай бұрын
u r sick in negative way and me too as i am watching it.
@DiegoInfoTech
10 ай бұрын
16:44 noooooooooooooooooooooooo
@ickyficky
9 ай бұрын
Poor little InWin...=(
@Angel_Daniel
4 ай бұрын
Holy s 😮😮😮😮
@spasitekto
10 ай бұрын
Круто но мне кажется корпус будет душноват
@THEISTT
Жыл бұрын
Can you make mac pro like no cable no wire management pc Challenge
@ViceStunt
9 ай бұрын
приемлемо
@Guns4Protection
10 ай бұрын
Знакомый видос)))
@gk7979
7 ай бұрын
впечатляюще. прям совсем заняться было нечем, видимо ))
@old_liquid
10 ай бұрын
Регард по русски написано.
@MARK2580
10 ай бұрын
лютый колхоз с нулевым охлаждением, смотреть исключительно на х2 скорости
@vwbug1975
10 ай бұрын
That paint looks terrible! So much orange peel. The person spraying doesn't know the correct distance to hold the spray gun from the work, so the paint is starting to dry before it lands on the surface. If you look at the reflective paint surface in the light, it looks like it as millions of tiny hollows, so the surface looks rough.
@VYACHESLAVx
Жыл бұрын
О! Регард) А вообще делаешь нормально, спустя время твой канал может стать популярным)
@stekansky2233
10 ай бұрын
так же не ожидал что реставрировать будут систему от регарда, пендосы удивляют
@BigBenAdv
Жыл бұрын
That Inwin case brings back memories of a bygone era! I remember having one during the early P4/ Athlon Classic days though not with the same front bezel.
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@Borismolotov
9 ай бұрын
InWin S500 first generation from end of the 90s, immortal classic. 1mm anodized steel, heavy weight, all i miss now.
@heckintech
Жыл бұрын
Absolutely stunning work! I desperately want to do something like this myself! :D
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@acidandrey
10 ай бұрын
Этот корпус неубиваемый.стенки толстенные инвиновские корпуса лучшие что я видел.железо толстое
@AphexWebb
10 ай бұрын
Really clean restoration. There's something about old retro PC cases that makes me feel happy. Good to see an ol dcase being cleaned up and put into use.
@SpartanIV
10 ай бұрын
I had that case from a junk pc I picked up. It was strong enough to use as a stool. They don't make them like that anymore.
@JollyJokerTheMetalhead
2 ай бұрын
Very nice! But If I were you I'd put the 5.25" media dashboards to the old optical drive slots, because the old cases lack the USB 3.0 ports in the front panel.
@arlenegando9658
Жыл бұрын
I just subscribed because the AIO magically transformed into DeepCool 🤣👍
@marioikada
Жыл бұрын
YOU SUPPOSED TO HAVE HIGHER VIEWS. PLEASE DO 4090 rtx with OLD PC LIKE THIS
@SidTheGeek
9 ай бұрын
Now when you open and try to restore Chinese case they come off like tissue paper
@thebayandurpoghosyanshow
8 ай бұрын
"How to take a good retro case and convert it to a bad modern case". Now the intake is just hot air with insufficient clearance, the pressure in the case is negative, a buttload of turbulence in the airflow, no cable management features :)) maybe it makes for some content, but not something I'd do or recommend.
@ariannanightingale4054
10 ай бұрын
Tf this is build done by FLFn. Either you're the same guy (though I don't see any links on his channel to yours or vice versa) or what's going on? Original video: kzitem.info/news/bejne/2Juvz22Za3R0pH4
@oetech
10 ай бұрын
Bah Cupinxa! Oh, you made me waste my time, watching this video with the font inverted. Disappointed. Kind regards, Beve.
@MRPcModified
Жыл бұрын
🇧🇷 I have a pc just like this one to customize 🙂 I also do this type of work, and I can say that it turned out super amazing, great job congratulations 👏👏👏
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@mirrorcatz
9 ай бұрын
impressive work but... I think you forgot about the cable management, luckily you didn't show the inside of the Case as much at the end 😂
@dim0n1
8 ай бұрын
it was pefrect case for retro setup, sorry for my honest opinion, at least i don't lie, it was hard to see... i mean you are really handy, and it looks like you know what you do, just my heard cries because of that case, which really reminds me one of first lian li cases...
@ahmedhemdan707
5 ай бұрын
wow nice work
@blanco4787
10 ай бұрын
I have a 2001-2004 era Gateway Case that i'm dyeing to restore, but i don't have the equipment
@Proolock
11 ай бұрын
bad conection in the gpu , dont use the same cable x2 gpu power. use x1 x1 . u can overcharge the line if use x2 in 1 cable.
@KM-Katarai_Mitsu
9 ай бұрын
Ну то есть... Ты вначале обезжирил поверхность , после использовал абразивный материал, и опять обезжирил ? Я ничего не упустил?!
@larietournelle7904
10 ай бұрын
People, why pc come from grey and now are all BLACK ( sometimes white )?
@bigdeagle1331
6 ай бұрын
Whatever happened to “falcon cases” everyone had to have one back in early 2000’s!
@mudgem3742
10 ай бұрын
Aside from the front panel, lack of front airflow, mismatched colors, good job for a first time resto.
@BigPin
10 ай бұрын
жарковато ему будет, и как то странно начинка черная, внешку оставили белой. Ну каждому свое
@renatomatias6024
9 ай бұрын
O único perigo é a mãe jogar fora, pensando que é um PC antigo.
@djesboco
4 ай бұрын
classic asus sticker from the 2000s... wow
@advsfidascatania
10 ай бұрын
hi, where can i found your stl files to replicate your project?
@PubgLover-zd4oj
2 ай бұрын
what happened make part 2 you no more pc buidl videos
@bwprh
2 ай бұрын
you should put a tag for sleeper pc since thats what you made
@atlasworld
10 ай бұрын
long time job good work but front panel look bad
@Cal97g
6 күн бұрын
Bro is literally a mute that's wild enjoy that
@qutaibahamwi
10 ай бұрын
just buy a new case you put time and materials worth more then the new one
@Pyovali
25 күн бұрын
Why can't manufactorers make these retro vibe cases for todays standards? I'd buy immediately.
@dilligafzilla
6 күн бұрын
demand being too low 99% prefers rgb fish tank so unless beige becomes cool again or some super niche brand emerges we are limited to restoring old rusty boxes
@Agidelis
9 ай бұрын
Si, if you dont have what to do in your life,then thats ok :)
@iiivanych2012
10 ай бұрын
Кажется, этот компьютер потом разыграли на стриме
@B_M_A
10 ай бұрын
Very well done, I kind of wish the paint would have been a satin or matte type but otherwise you did a good job!
@Animitsa
10 ай бұрын
А что это мы шифруемся под англоязычный канал??)
@CorsoOZ
10 ай бұрын
Зря, испортил классический корпус фирмы invin😢
@garyr7027
10 ай бұрын
Did good, lots of work put into it... nice job. One piece of advice that many overlook and think it's not necessary. It really does matter where those hoses on a radiator are located when using closed loop liquid cooling. Despite what some claim, the most efficient and effective way to mount a radiator like these are at the top with the hoses hanging down. You can also place the hoses at the bottom when mounting for a vertical position. This ensures all the air in the radiator is at the top and will remain there so your pump isn't pulling in air and make gurgling noises for more efficient cooling. My personal preference is at the top in a horizontal position, but then it depends on the case.
@roasthunter
10 ай бұрын
Yeah you want the radiator higher than the pump, any air will rise to the top of the radiator.
@MrChernov
9 ай бұрын
Водянка тянет горячий воздух в корпус? Лол
@PubgLover-zd4oj
2 ай бұрын
make part 2 then testing games with benkmark
@KChurros
2 ай бұрын
thx for the satisfying video !
@thevitas1
10 ай бұрын
Руки за стачивание ребер жесткости и утончения из-за этого металла поотбивать! Особенно доставляет установка 120 мм вентилятора на заднюю стенку, и отсутствие для него вменяемого отверстия для выдува воздуха, куда он там интересно дует то?
@2298839082508923859
10 ай бұрын
🤡
@Volodka7000
10 ай бұрын
Regard?? Are you from Russia?
@EBIKESWN
10 ай бұрын
It looked prettier without the lid.
@pristbaiser9443
10 ай бұрын
A great job but in my humble opinion, it would be better to create something from scratch based on an old cabinet, why is restoration leaving it original, or with a couple of modifications that do not alter its structure or appearance?
@barneybarney3982
Жыл бұрын
Powering graphics card like that is bad practice. If possible use two 8 to 8 cables instead of one 8 to 2x8 pin.
@waldfruchttee
Жыл бұрын
i like the harddrive activity in the background
@gabrielcosta3301
9 ай бұрын
I really loved it, but since you seem to be able to 3D print as much as you want, I'd print a grill for them bottom (only the filter feels too flimsy). Great job nonetheless, absolutely wonderful result
@raultebelin5354
11 ай бұрын
I have an old casing from South Korea and almost the same as this one... maybe i'll give it a try too hehehe. Thank you for the idea. edit: sadly I don't have 3D Printer but I'll think of some other way maybe
@michaelbassett7896
4 ай бұрын
Still one of my fav PC case refresh / diy / mod. Any more of these type videos planned??
@gnarlin4964
10 ай бұрын
This reminds me of the videos by My Mechanic. Were you inspired by his style? I would have also cut a square hole into the motherboard tray so that the motherboard doesn't have to be removed from the case if a different cpu cooler requires a different backplate. Also, there are reverse facing fans that can be put into the bottom of cases that look more fitting.
@pcmod-1
Жыл бұрын
Full pc build on my second channel - kzitem.info/news/bejne/zY2ty4SFqIt3nn4
@JuanGonzalez-hv6vs
Жыл бұрын
Fantastic job, super job, excellent modding
@Fr0stY_D0G
Жыл бұрын
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles kzitem.info/news/bejne/2Juvz22Za3R0pH4
@davidfranklinv2860
13 күн бұрын
This was superb
@WadeOmaha
11 ай бұрын
Incredible! The best sleeper I've ever seen! I wish I had your knowledge and tools (3D printer). It's my dream to build sleepers not only out of old PCs but also strange things like classic stereo amps and stuff you'd never guess were PCs. Great work sir, you have a new subscriber!
@tuff_lover
10 ай бұрын
So, LTT sleeper doesn't count?
@athmaid
9 ай бұрын
There are services like PCBWay you can send your CAD files to to have printed
@Daehanseok
10 ай бұрын
Outside : 👴 Inside : 😈💀
@Finix.W
10 ай бұрын
Zalman -> Deepcool?
@syarafikasim1818
8 күн бұрын
nice work
@MrPartalh
10 ай бұрын
Really good craftmanship, a little bit less paint i would use and you need to fil the space on the back fan so air goes out!!
@sirhempsen3841
10 ай бұрын
But can it run Crysis?
@m.a6416
Жыл бұрын
Excellent work but retro is lost when the floppy and cd rom is removed. Should have kept the façade of them in the front for loks
Пікірлер: 200