Nice start to the Apache, Paul. Looking forward to the build. Cheers to you and Sue
@plasticmonkey5594
Жыл бұрын
Thanks Paul appreciated, look after your self.
@Marley-k2i
Жыл бұрын
Hi PM, that’s a beast of a kit you got there! I look forward to the rest of the build and the finished model.👍🏾
@plasticmonkey5594
Жыл бұрын
It is I hope I shall do it justice has one of my subs give it to me ,so no pressure. Have a good week
@ZinzanModelling
Жыл бұрын
Dear Mr Plastic, An excellent start on this kit! Nicely done on the cockpit- lovely little details there! Regards, Z
@plasticmonkey5594
Жыл бұрын
Thanks zin appreciated
@ThatMofoDamon
Жыл бұрын
You are working on all the cool choppers I want to get in my hands Paul 😂😂! I have plenty of your builds I'll visit in the future again. Nice work done. Thanks for sharing, take care and keep up the good work my friend.
@plasticmonkey5594
Жыл бұрын
Thanks George. Hope you guys are safe and well, looking forward to your next video.
@fiftiesbinman2083
Жыл бұрын
New week and a new kit, love it.... it is a big old kit.. the detail looks good on it...
@plasticmonkey5594
Жыл бұрын
tHANKS BINMANmuch appreciated.SO far so good
@seamybmw
Жыл бұрын
Great start to this big chopper Paul and you did an excellent job on the cockpit 👍👍
@plasticmonkey5594
Жыл бұрын
Thanks 👍
@collinmccallum
Жыл бұрын
The details are awesome! looking forward to seeing it again.
@plasticmonkey5594
Жыл бұрын
Thanks Colin much appreciated
@LarrysModelShop
Жыл бұрын
This thing is pretty big. Looking good so far. I'll be watching for the updates.
@plasticmonkey5594
Жыл бұрын
Thanks Larry have a good week
@brendongunnell1299
Жыл бұрын
That cockpit is looking AMAZING Paul😉👌👌👌👌, that section worrying you is part of the tail rotor assembly😉
@plasticmonkey5594
Жыл бұрын
Thanks Brendon much appreciated.
@DutchDaveModels
Жыл бұрын
Nice progress on the Apache. See you figured the probe out being the back rotor. 👍
@plasticmonkey5594
Жыл бұрын
Thanks Dave appreciated
@RimsModels
Жыл бұрын
Great video my friend the apache is coming along nicely the details are amazing the cockpit is looking fantastic can’t wait to see what you do with it keep up the great work and thanks for sharing 👍👍
@plasticmonkey5594
Жыл бұрын
Thanks Rob appreciate your comments
@michaelbenjmitchell1
9 ай бұрын
I've built this kit ages ago and I do have another in the stash that I have had in the old Monogram boxing that I got for free in one of Monograms old mail in offers decades ago.
@plasticmonkey5594
9 ай бұрын
It built up without any problems nice kit .stay safe and have a good week 👍
@NigelsModellingBench
Жыл бұрын
Cockpit looks great Paul/ i was about to say the bit you asked about was the tail rotor then noticed your pinned comment..
@plasticmonkey5594
Жыл бұрын
Cheers Nigel
@411maintainer
Жыл бұрын
nice size kit, you can do your great work on the detail with this size! i cannot wait to see how it looks finished.
@plasticmonkey5594
Жыл бұрын
Thanks Dave appreciated
@harryaudia6
Жыл бұрын
looks a fair size Paul, the pilot sits in the rear and the gunner in front. You've made a good job of the pilots dashboard👍
@plasticmonkey5594
Жыл бұрын
It's pretty big Harry appreciate your comment
@GaryGMW
Жыл бұрын
Hi Paul,looking good mate especially the detail work on the control panel.Thanks for the video.All the best and enjoy your time off from work cheers Gary
@plasticmonkey5594
Жыл бұрын
Thanks Gary ,Have a good week
@davidguy6823
Жыл бұрын
Great start to a mammoth model!
@plasticmonkey5594
Жыл бұрын
Thanks David appreciated
@wendyhickson5284
Жыл бұрын
Looking great Paul. A large kit for you to work your magic on
@plasticmonkey5594
Жыл бұрын
Thanks Wendy have a good week and stay safe
@jamesvancornewal6994
Жыл бұрын
You'll be an expert helicopter builder Paul, at the end of this mate!🍻👍
@plasticmonkey5594
Жыл бұрын
Thanks James
@baymodels
Жыл бұрын
Great job Paul. I really should finish y little Apache at some point. It's mostly done but 1/72 scale. The cockpit is looking awesome :)
@plasticmonkey5594
Жыл бұрын
Thanks Ian appreciated
@JeffDonahueScaleModeling
Жыл бұрын
Hi Paul, nice progress on the Apache, Thanks for sharing. Have a great day. Jeff
@plasticmonkey5594
Жыл бұрын
Thanks, you too!
@paulprice1994
Жыл бұрын
Monkey parts 6o, 61, 76, 78 are the tail rotor shaft that go thru the tail😁
@garyconstable179
Жыл бұрын
Looks like the tail rotor Paul
@plasticmonkey5594
Жыл бұрын
PROPER JOB YOU COULD BE RIGHT GARY JUST HAD A LOOK . STAY SAFE
@hobbytime2098
Жыл бұрын
Looks like the shaft for the tail rotor paul
@greybeardmodels
Жыл бұрын
Getting right into your choppers Paul? Have fun mate. Cheers Bob 👍
@plasticmonkey5594
Жыл бұрын
Seem to be Bob haven't built so many planes
@tronmcconnell4465
Жыл бұрын
Paul, I don't know, it looks like another set of confusing Revell instructions. It sounds like they would benefit from a complete rewrite. Also your painting on the cockpit looks absolutely great.
@plasticmonkey5594
Жыл бұрын
Thanks Tron, Why on earth they would put the rotor details at the beginning my mind boggles. Have a good week.
@skullfish
Жыл бұрын
its part of the anti spin spiny doo-hicky..oh youve got it lol, Shes a big Bird, dont think the Tamiya fast is gonna do much with the jolly green giant old revell plastic
@plasticmonkey5594
Жыл бұрын
Thanks Jason .Yes am useig revell contact
@michaelslade4271
Жыл бұрын
Paul it’s the tail rota😊
@wombat_models
Жыл бұрын
Looking good Paul. 👍
@plasticmonkey5594
Жыл бұрын
Thanks Wayne appreciated
@daleaddison2988
Жыл бұрын
Is it the tail rotor?
@hacheyp
Жыл бұрын
That plastic looks hard and brittle?
@gavinbooth
Жыл бұрын
Well i defy you to loose any of those parts Paul 😁 its proper huge marra . Regards Gav.
@plasticmonkey5594
Жыл бұрын
Cheers Gav appreciated lol. Have a good week
@HughGordon124c
Жыл бұрын
Nice Monkery...im looking for one in 1/48th.
@plasticmonkey5594
Жыл бұрын
Been told the hasagawa is the best 1/48
@steve08717
Жыл бұрын
is it the tail rotor
@plasticmonkey5594
Жыл бұрын
THINK YOU COULD BE RIGHT THANKS
@hacheyp
Жыл бұрын
Actually I should have said the plastic sounds hard and brittle…
Пікірлер: 71