Nice work, I haven't plucked up the courage for panel lining yet, maybe the next one!
@lowrentrick
Ай бұрын
Go for it! I was a bit nervous tbh haha Thanks for watching
@videnema8391
Ай бұрын
Excellent build matey
@lowrentrick
Ай бұрын
Cheers!
@UncleTadhg
Ай бұрын
Mine's been languishing in the stash for about a decade, but seeing this has inspired me to grab some 80 grit sandpaper and have a go at her. Great video, thanks for posting!
@lowrentrick
Ай бұрын
Excellent!! It is a bit of hard work.. please let me know if your end wing sections have recesses to accept the lugs, or if they are just blank like mine and I got dodgy kit and had to cut off the lugs and glue flush.. thank you very much for watching. 👍👍👍
@UncleTadhg
Ай бұрын
@@lowrentrick Just checked, mine DOES have slots, but they're very narrow (less than 1mm) and poorly defined. I'll no doubt end up down the superglue route too!
@lowrentrick
Ай бұрын
@@UncleTadhg thank you for checking!! I didn’t see even a 1mm gap on mine.. it did have quite an edge on the larger pieces too.. at least you know it’s something you’ll have to do now instead of it being a surprise like I got 😂😂
@UncleTadhg
Ай бұрын
@@lowrentrick Knowing the kit's age and pedigree, I was sure nothing would surprise me!
@lowrentrick
Ай бұрын
😂😂😂
@Ash-ju3xj
Ай бұрын
I have shared this video on my local model club Facebook group
@lowrentrick
Ай бұрын
You’re a legend thank you so much! It’s a real struggle getting the views as a small channel so this helps a lot!!
@KimOverton-id6ef
Ай бұрын
Another great build, even with the issues that you faced with the kit 👌
@lowrentrick
Ай бұрын
Thank you 🙏
@evotika
Ай бұрын
Great build.. excellent effect on the paint! 💪💪
@lowrentrick
Ай бұрын
Thank you! Cheers!
@typhoon2827
Ай бұрын
Enamels are fine paints, in my humbrol opinion.
@lowrentrick
Ай бұрын
Must admit this made me laugh out some coffee!!
@andrewedwards7467
Ай бұрын
😀😀😀
@andrewedwards7467
Ай бұрын
@@lowrentrick😂😂😂
@andrewedwards4095
Ай бұрын
Nice
@lowrentrick
Ай бұрын
Cheers
@epos79
Ай бұрын
nice one bro, I just picked up the same kit a few weeks ago, looking forward to that build :-) cheers
@lowrentrick
Ай бұрын
@@epos79 you’re very welcome.. it’s an in depth build.. watch out for the wing slots at each end.. mine didn’t have any! Enjoy it, thanks for watching 💪💪
@OldGamingGeezer
Ай бұрын
Hi. Nice job on the Victor. Beautiful plane. I had this same kit, but never finished it. Like you I used it to test painting methods. My kit was really bad, lots of parts just didn't fit together. I had huge gaps, and the canopy was totally warped. But, in fairness it is a very old tooling. I have been thinking about picking up the Airfix model.
@lowrentrick
Ай бұрын
After a lot of sanding and superglue I was pleased with it, if nothing else it taught me a lot..
@fiveminuteworkshop
Ай бұрын
fantastic work 👌👌👌
@lowrentrick
Ай бұрын
Thank you! Cheers!
@andrewedwards5057
Ай бұрын
🙏🙏🙏
@lowrentrick
Ай бұрын
:-)
@Rich77UK
Ай бұрын
I would guess the lacking slot in the wing will possibly be down to tool wear/damage and repair/refinish. It's common to laser weld repair or remove a feature creating a cavity if it becomes damaged. Normally it's wouldn't fly (pardon the pun) but as its a hobby kit most moulders won't worry as what's a little fettling in a model kit? wonderful finish there. I love the Victor and especially the Vulcan. I tend to build 1:48 and have a hankering for the new 1:48 SR71 but would love a 1:48 vulcan and Victor... alas I don't have a spare room for them...so I will likely pick up good 1:72 versions at some point.
@lowrentrick
Ай бұрын
@@Rich77UK pun pardoned 😂 I didn’t spot the lack of slot until I’d glued the pieces 😂 live and learn.. thanks for watching 👍💪
@duncanling2127
Ай бұрын
Beautiful work as always Rick when I made one a a few years ago I got some old shoe laces to simulate the refuelling lines and attached them to a tornado sadly I don’t have either kits any more :(.
@lowrentrick
Ай бұрын
Thank you!!! Good idea for the refueling.. do you think you’ll build another??
@duncanling2127
Ай бұрын
@@lowrentrick I hope so I was thinking about the recent Airfix one but it’s too expensive so I might go back to the won you’ve have built and thank you it looked cool hanging from the ceiling :)
@duncanling2127
Ай бұрын
@@lowrentrick I am not sure the shoe laces where to scale but but in my head it looked good lol 😂
@lowrentrick
Ай бұрын
Agreed 👍
@lowrentrick
Ай бұрын
😂
@DB.scale.models
Ай бұрын
I never seen white used for pre shading. Very good work for first-time air brushing😊 👍 What little camera are you using ? Thanks for sharing!
@lowrentrick
Ай бұрын
Thank you! The little camera is a GoPro Hero 5, Main camera is an Obsbot Tiny 4K. Thanks again for watching my videos.
@411maintainer
29 күн бұрын
Nice job you did on that awesome plane. 😊
@lowrentrick
29 күн бұрын
Thank you very much 😊😊😊
@robjohnson2821
10 күн бұрын
Great job mate 👍 thanks for sharing.
@lowrentrick
10 күн бұрын
Thank you! 👍👍👍
@Tconcept
Ай бұрын
It's a Matchbox kit, shame people don't acknowledge it's heritage.
@lowrentrick
Ай бұрын
I didn’t know this..
@evotika
Ай бұрын
@@lowrentricknot a lot of people do…..
@andrewedwards7467
Ай бұрын
People probably don’t know that!
@gapratt4955
29 күн бұрын
Watching this video it would be hard to tell you are a novice on the airbrush. Practice is the key.
@lowrentrick
29 күн бұрын
@@gapratt4955 thank you! This really was my first time! I have just got another kit with a compressor so practice will not be a problem!! Thank you for watching 👍🙏💪
Пікірлер: 58