You probably won’t see this comment but, I have been searching for a model car or just model channel to watch a see how to put things together or tips on how to build the car. I found my channel here I just bought the 918 kit myself and you have helped me through it since it is my first one. All I can say is thank you!
@TheScalemodelingChannel
6 жыл бұрын
Good luck ;)
@Toppervision1
8 жыл бұрын
I could watch your airbrushing all day. Primer coats look great. I see that part 3 is posted. Going there now...
@rsaturn9
8 жыл бұрын
The primer looks nice and smooth
@awash-mg8ce
8 жыл бұрын
Amazing build buddy
@ultimatedoubleteam
8 жыл бұрын
Great video
@ronzufelt1428
8 жыл бұрын
Great video.
@JungleJamesModeling
8 жыл бұрын
Yo dude have a Happy holidays. u do nice work
@oldbeatercars
8 жыл бұрын
Now that is nice
@pturley84
8 жыл бұрын
Good stuff!
@pierrededinard1957
8 жыл бұрын
Great video, once again... BTW, you never use primer spray ( Tamiya for example), you always use your airbursh. Why that ?
@TheScalemodelingChannel
8 жыл бұрын
+Pierre De Dinard Airbrushing is a lot more precise and controlable. I can get in to a lot tighter spaces with my airbrush then i could with a spray can, plus a can of primer is a lot more exspensive then a bottle of primer that lasts a lot longer.
@lukeknights7381
7 жыл бұрын
does rubbing the body with sandpaper before primer give a better paint finish? Also, can't wait to see the 570S finished.
@TheScalemodelingChannel
7 жыл бұрын
The smoother the primer, the easier it is to get a nice finish.
@lukeknights7381
7 жыл бұрын
The Scalemodeling Channel OK thanks!
@Homerlovesbeer2
8 жыл бұрын
G'day. The build is coming along nicely. A couple of questions. Have you ever used Badgers Stynelrez primer, and what spray booth do you have? And one last question, why 3 coats of primer? Wouldn't two be enough? Cheers ☺
@TheScalemodelingChannel
8 жыл бұрын
+Homerlovesbeer2 1. No 2. SparMax 3. to build it up a bit in case i would have needed to sand it down. Though it was smooth enough it ended up not needing any sanding
@Homerlovesbeer2
8 жыл бұрын
+The Scalemodeling Channel ahh ok cheers. What sparmax model? I'm in Australia so probably hard to get here (as usual).
@TheScalemodelingChannel
8 жыл бұрын
No idea wich model, mine was sold under an other brand name
@Homerlovesbeer2
8 жыл бұрын
+The Scalemodeling Channel righto. Well I'm really keen to see the next part. Thanks again for the effort in producing these vids. Cheers 😄
@ambrosiohernandez2898
6 жыл бұрын
I saw the 918 at my local hobby lobby. But I had one reason not to get it....painting it. See I don't have a fancy paint pen thing that you use. So I was wondering if spray paint was just as good? Or another cheap alternative?
@TheScalemodelingChannel
6 жыл бұрын
+Ambrosio Hernandez its a good place to start from
@ericpuckett2364
8 жыл бұрын
Do you enjoy this build?
@TheScalemodelingChannel
8 жыл бұрын
+Colderapollo 882 Jup
@radicalracinghd4246
8 жыл бұрын
Have you ever made your own decals using an inkjet printer? My uncle makes them for ones he can't get
@TheScalemodelingChannel
8 жыл бұрын
I have, for the ford raptor build
@MD4ProductionsMD4
8 жыл бұрын
How do you print your own decals?
@TheScalemodelingChannel
8 жыл бұрын
Print the decals on decal paper and seal them with cldearcoat or decal film.
@autofiend4868
8 жыл бұрын
Hey I mixed 1ml of the tamiya surface primer with 1ml of tamiya x20a thinner and the mixture turned lumpy...anyone know why?
@TheScalemodelingChannel
8 жыл бұрын
Did you mix it good enough?
@autofiend4868
8 жыл бұрын
The Scalemodeling Channel it seems like as soon as I put the tamiya thinner in the primer, the primer becomes like a plastic ball and I'm left over with a light white paste and a ball of hard gum. it doesn't change after lots of mixing with a stick and shaking.
@brycemorrowvlogs313
7 жыл бұрын
Do you live in the USA
@leomorse7605
8 жыл бұрын
Are Gravity paints cellulose based like Zero?
@TheScalemodelingChannel
8 жыл бұрын
+Leo Morse Not sure, though i do think they are ok to go over zero paints, from the FAQ on their website i did not really get an awnser either: www.gravitycolors.com/eu/faqs/
@leomorse7605
8 жыл бұрын
+The Scalemodeling Channel It says solvent based, but to use acrylic thinners should you need to thin further.....interesting!
@TheScalemodelingChannel
8 жыл бұрын
+Leo Morse Exact thought i had.....
@GravityColors
8 жыл бұрын
+The Scalemodeling Channel Gravity Colors paints are solvent based lacquer paints. Zero paints are lacquers as well. Not acrylic.
@GravityColors
8 жыл бұрын
+Leo Morse You can use any type of high quality automotive lacquer thinner to thin Gravity Colors paints. You should not use the cheap lacquer thinner you can buy at home depot or hardware stores. They are only good for cleaning your airbrush. Those type of lacquer thinner is way too aggressive on plastic models. The reason we are using and recommending acrylic lacquer thinner because it is less aggressive on plastic. It does not have that high level of acetone like the cheap hardware store lacquer thinners.
Пікірлер: 38