Cool little tool. Be sure to have it on you for our trip, who knows we might need it
@klu777
Жыл бұрын
😁
@OskarNy97
6 ай бұрын
Really nice video, thanks for showing the images in between it really helped out 🙂
@klu777
6 ай бұрын
glad it helped!
@craigkennedy5328
9 ай бұрын
Nice video and explanation. Is there a point at riveting where you can’t tighten any more or it gets to the end so you cannot tighten any more. Interested to know if the tool tells you when to stop tightening for riveting. You mention tightening to 17Nm. Do you tighten to the end or is there a point you stop. If you have a calliper, the diameter could be measured I guess. Thanks for posting. Looking to buy the tool.
@klu777
9 ай бұрын
there is no point where the tool stops by itself. Just tighten it to 17 nm and if you want to be sure is good, measure the diameter of the flared pin. has to be between 0.5-0.7 mm. The chain manufacturer usually has a chart with the diameter of the flared pin for each chain. if it does not have one, use 0.5-0.7 mm. Here you have a chart example from RK chains: www.google.com/imgres?imgurl=https%3A%2F%2Frkexcelamerica.com%2Fwp-content%2Fuploads%2F2020%2F05%2FRivet-Diameter-MIN-and-MAX-768x725.jpg&tbnid=OxAkHw2uJ6g0CM&vet=1&imgrefurl=https%3A%2F%2Frkexcelamerica.com%2Fproducts%2Fchain-tool%2F&docid=dW34Fk1jg4BCmM&w=768&h=725&hl=en-GB&source=sh%2Fx%2Fim%2Fm4%2F3
@craigkennedy5328
9 ай бұрын
Thanks again for sharing your experience and helpful hints. Kind regards.
Пікірлер: 7