just bought the combo from Lowes , the stand is free when you buy the saw... your review was very helpful
@drdwgmd14
4 ай бұрын
Extremely helpful! thanks. does the stand stay bolted to the saw even during transport with the bolts you showed?
@goldfamily6852
4 жыл бұрын
I just assembled mine now and yes, you installed the yellow base backwards.
@cjpatterson21
3 жыл бұрын
If by base you’re referring to the yellow mounting brackets that are mounted to the bottom of the saw, then you’re incorrect. The mounting brackets are clearly labeled with “front” and an arrow, front referring to the side of the saw that you work from. He has them installed correctly in this video. You might want to check your saw. I have this saw and stand as well. It is mounted correctly.
@ocdmachine
8 жыл бұрын
Nice review, was considering the stand since Lowes had special combo price now for both. Your review was most helpful!
@rafaeldelgado4985
4 жыл бұрын
Good review I just bought the compact version you were kinda slow setting up the stand that's good being safe I myself probabably woulda ripped some skin off lol thanks for the review.
@DR-zi3wz
6 ай бұрын
At 54 sec into your "review", what is that "bow-tie" looking metal thing on the stand's track? I've had this stand for 5 years, and I can't find anything that tells me why it's included with the stand. The other thing is that one of the release handle's push-button to unlock the handle broke. Watch out for that. You can still use it, but you have to stick your finger up in there and fiddle with the lever to unlock it.
@christopherlittle7719
8 жыл бұрын
Thanks for the video review. Decided to pick one up.
@lubetester
3 жыл бұрын
You have your saw mounted backwards
@nicolebraxton6273
2 жыл бұрын
Does this comes with a mounting bracket that goes to the miter saw ?
@kasiecoelho4337
4 жыл бұрын
How do I disassemble the stand and take the saw off safely? Is it really heavy?
@Snurre86
8 жыл бұрын
This and my DE7400 stands lost all there rubber feet after 2 years use. Now I can't use them inside without having a chipboard under it. New replacement rubber feet are more expensive then buying a new stand!
@rafaeldelgado4985
4 жыл бұрын
That's so sad
@Snurre86
4 жыл бұрын
@@rafaeldelgado4985 OK mr. robot
@Adam-tl6jo
2 жыл бұрын
where did you get those wing lock handles?
@mojzi
4 жыл бұрын
what length is the table ?
@MrTubs911
7 жыл бұрын
how much does the stand weigh?
@johnmiller9219
3 жыл бұрын
i detect a canadian accent?
@samuelkobielnikjr.2377
3 жыл бұрын
You stood in front of it I can’t see how you put the saw on the stand plus I wasn’t sure where do you push the button to open the legs again there’s no close-up and you stood in front of it so I can’t see nothing
@Cockroach2008
8 жыл бұрын
You installed the saw on the stand from the wrong side! If you approach the stand from the back with the operator's side facing away from you, the saw balance is better & installation is not so clumsy. You forgot to mention the locator clip to but the saw brackets in to prevent lateral movement. Also, the DeWalt instruction manual says you need a #2 Phillips screwdriver to adjust this locator clip. However my stand has a 1.4" allen screw to adjust that clip. Also, would like to mention that "unloosen" is a not a word & is a double negative. Use "loosen" instead. People will understand better.
@mr.wizeguy8995
7 жыл бұрын
Sadly he installed saw just the way it is described on Dewalt installation guide which is also more stable way to do it. Pretty sure you both don't even own this saw stand.
@Mike--K
7 жыл бұрын
I have the DWS780 and this stand. Although he installed on the wrong side of the stand (if he wanted to use the locator bracket), he did install it on the stand correctly. I agree with Mr. Wizeguy in thinking you don't own the stand or don't move it much. I move my saw a lot during the day, and the only safe way to move it is by approaching the stand from the front and tilting the saw back so the latches engage on the back of the stand.
@timfiskum5866
6 жыл бұрын
No that is correct look in the manual. Think about it why would u want the saw side hanging off your stand? The backside hangs off so the front stays stable
Пікірлер: 25