Special Thanks to Fred Dodge for the 3D Printed guard rails. Time Stamps: Specs & Packages: 0:09 Building Tips: 3:01 Setup: 5:25 Test Drive: 6:59 Conclusion: 8:50
@andidiningrat8608
4 жыл бұрын
Saya sangat senang noton youTube anda... Saya hanya pengumpul barang bekas rc sudikah anda memberikan yang tak berharga, agar saya dapat melepas hobi saya, karna saya tak seberuntung anda tapi saya nerusaha 🤗🤗🤗
@ryanhickey9984
4 жыл бұрын
Wish there was a pre-built option available 😭
@BeaversHobby
4 жыл бұрын
@@ryanhickey9984 Aliexpress seems to have a pre-built version. www.aliexpress.com/item/4000212209722.html
@uploader11459
4 жыл бұрын
You only have the name of the car in the thumbnail...
@mansivarpe2181
4 жыл бұрын
How to buy
@ishigamiyu1991
4 жыл бұрын
"How much steering angle do you want?" "Yes"
@alexanderthegreatish4079
4 жыл бұрын
360 degrees
@brian8808
4 жыл бұрын
Ow yeshhh
@atifams130
4 жыл бұрын
@@alexanderthegreatish4079 90
@bigtoeflip
3 жыл бұрын
😂😂 isn't that what you want
@TrafficCheck1126
4 жыл бұрын
probably the greatest accent of all time
@javierruiz9087
4 жыл бұрын
Johnson Nash some people love cheap shots
@siiiiiiiiiimo
4 жыл бұрын
Its Mort from family guy and a samurai
@dominicw8868
4 жыл бұрын
Simon Monto he sounds nothing like mort dude
@roshangurung1042
4 жыл бұрын
I can’t disagree with the comment of “the greatest accent”.👌
@atifbelim2005
4 жыл бұрын
One moment he sounds like a Indian next second he sounds Japanese .
@N35QU1K
4 жыл бұрын
Dude that test drive at the end blew my mind, you are a really good driver! You make it look so easy but I'm sure you've had a lot of practice.
@BlvlWmpower
4 жыл бұрын
That is a paid voice over after for the chinese. This is intellectual property theft.
@j_will7305
4 жыл бұрын
Vapletrichs Gne how?
@thegarf5677
2 жыл бұрын
@@BlvlWmpower what the hell are you even saying
@kylesmith6515
4 жыл бұрын
I was big into 1/10th had a glam yd2 and a yokomo dp the local track went bankrupt unfortunately and I don't have much space for them. Finding your videos really got me back into the hobby. Now I got 2 of these and I run them on my billiards table. I used MDF board and used a nice carpet for drifting on it and it's good fun.
@draganblastovicz7487
3 жыл бұрын
By far the best mini rc channel in the world imo. Honest, very informative and the place to learn the nicest tips and tricks about mini rc. Thank you very much for all the great help you provide kind sir.
@STANCED
4 жыл бұрын
Thanks for mention me Beaver, that's a very detailed review!
@narechok1489
4 жыл бұрын
Always loved 2wd drifting It’s like different experience
@smotakioo2455
4 жыл бұрын
Bever's hobby, you are my favourite youtuber, keep going like this!
@GarageMiniRCUK
4 жыл бұрын
Thanks for the mention. Always love watching your videos for accurate tips, love the little giggle that you had to use Toyota ae86. Gotta love the ae86. 👍🏽
@coolasrc
4 жыл бұрын
Excellent video my friend! I have been into micro losi 1/36 scale at the moment, I do have the WLtoys p929 and 959. This video has inspired me to get back into the Wl toys and I may have to pick one of these up! They look really awesome. Thanks for making these in depth videos on these micros, definitely inspired me. Thanks beaver 👍
@admiralisshobattousai2806
3 жыл бұрын
Thank you soo much Beaver for review and tips!. Its really hard to assemble without manual.
@Outrjs
7 ай бұрын
Cool video. Precise and clean!
@gmodesike
3 жыл бұрын
Love the way he talks. Nice
@WalterNut99
4 жыл бұрын
I love your accent. Im spanish and i can understand perfectly!! Jqjqjajja 10 of 10!
@mjrsndwrx7515
4 жыл бұрын
Superb, thanks for posting this. The chassis looks amazing and I’m loving your driving skills.
@ironj100
4 жыл бұрын
One thing it look so hard to do.BUILD THEM UP. THEY ARE AMAZING LOOKING
@BeaversHobby
4 жыл бұрын
This is the easiest 1/28 RWD to build right now. It's a bit fiddly but still not driving people insane like Atomic DRZ.
@CK-pv5yq
3 жыл бұрын
Great review! I just bought one through your link.
@Auranapse
4 жыл бұрын
Great review! I actually expected the DRZ to be easier to drive. I only just got a DRZ and haven't finished building it. Would be interested to see a review on the super skeeter DRZ or XRX, but those are a pretty large investment.
@GarageMiniRCUK
4 жыл бұрын
Agreed. I think it took me less time to set up HGD1 and impressed it handles well as 90mm. Still think drz is smoother once you get it set up correctly... But it does take more fiddling to set up. Im gonna have a look at xrx next. Can't face super skeeter yet. Building front bulkhead on Drz nearly broke my sanity. 😂
@BeaversHobby
4 жыл бұрын
Looking at the Super Skeeter price and I could buy a whole XRX DPA... I think I'd go with XRX. DRZ is good as long as you don't go beyond what steering angle can work effectively. It's really smooth and I like that about it. I'll continue to tune HGD1 a bit more to see how much can I get out of it.
@Auranapse
4 жыл бұрын
@@BeaversHobby Maybe will try getting the XRX DPA in the future, really like how the steering pivot is very close to the wheel.
@Auranapse
4 жыл бұрын
@@GarageMiniRCUK Haha luckily hadn't had much trouble with the front assembly. Just missing some parts and waiting for them to arrive. Hopefully can get it to handle better than my HGD1. Tuning and drifting RWD drift cars is too addictive xD
@RcModwerks23
4 жыл бұрын
Awesome little drift car!
@zeno6111753
4 жыл бұрын
As always, great review! Now build another one as a fully fledged racer :)
@kishon3061
4 жыл бұрын
Thankyou for the great review as always beaver !
@_gummikko_
4 жыл бұрын
Thanks for the honest review 👍 You drift like a king 💎💎
@Fantabiscuit
4 жыл бұрын
I LOVE your accent. More please
@EXTRA_SLIDEZ
Жыл бұрын
with the servo horn spacer, I am pretty sure you are supposed to attach the tie rods to a lower point and trim the rest so it won't rub.
@BeaversHobby
Жыл бұрын
Attaching the tie rods to a lower point will decrease the steering angle and this car needs all of that.
@matthutch5919
4 жыл бұрын
Fantastic video. Thanks for uploading
@karny97
4 жыл бұрын
Bloody awesome
@MiniRacersRC
2 жыл бұрын
Sweet lil car...
@UnwrappingByMimiKoteng
4 жыл бұрын
Amazing
@ElliotM8
4 жыл бұрын
Very informative thx bro I'm getting one soon. I'm DEFINITELY saving this
@foxhoundra6444
Жыл бұрын
This is awesome dude, once again youre the best! Anyways, I got my HGD1 in finally and I am trying to extend the wheelbase to fit this Tamiya 1/24 scale model body, I am super excited to get it up and running I hope the brushless motor/esc set I bought comes with a pinion! Do you suggtest metal or plastic pinion?
@BeaversHobby
Жыл бұрын
Normally the motor won't come with a gear but the car will. It'll be a plastic gear and that's perfectly fine. I prefer plastic to metal because it's easier to remove. And if the metal gear doesn't have good quality it will last the same as plastic.
@HighhScore
4 жыл бұрын
My cat will love this!
@vektr6278
4 жыл бұрын
Thats a great review. Looks very interesting. Since you mentioned it, Can you make a video on how to use an Aoshima 1/24 body shell on this HGD1 Chassis. I think it would be an interesting video because Aoshima has lots of nice mods body.
@BeaversHobby
4 жыл бұрын
Absolutely. I'm looking at how to import that sexy FD RE Amemiya. If that doesn't happen then I'll have to settle with something like M5 I can find locally. Or a Trabant... that would be quite funny.
@virtualpinball5065
4 жыл бұрын
Beaver you are doing a great job to promote this hobby. Please, let me make a question. My problem is this. I've: -flysky gt3c, esc and servos - mini q5 brushless: this one is not very good to drift because lot of potency and bad body componets (poorly shock absorber, and plastic diferentials and knuckles) - mini q trq1: i like this one but not very easy to change body shells or perfect to drift - i recently a firelap l408 because now is only 38€ and i have others body shell compatible with this model So now ive lots of trasmitter and diferent components but no one is enough to get a good experience. My Desire is use my gt3c and focus my efforts to one model. Mini z is hard to get components, usually are out o stock. For that reason i try to get a good banggod and get components easily. My questions are: 1)coud be this the best drift kit for me? 2)or: do you recomend me upgrade my other models? 3) could be better buy a wltoy k989 and upgrade it? I have a a989 and is a good car. Thanks a lot for your work.
@BeaversHobby
4 жыл бұрын
Yes, Firelap IW04 or L408 can be a good drift car with a bit of upgrades. It also has very good compatibility with Mini-Z bodies too. I'd suggest you upgrade the bearings first, you can buy them off ebay, don't have to be from a Kyosho dealer. Here's the tutorial. kzitem.info/news/bejne/yXic14p3s6yUZoo Then since you already have a transmitter, you can get the Emax ES08MDII servo and a cheap ESC to overhaul the electronics. Here's the tutorial. kzitem.info/news/bejne/0oKDmYWeb52cqGk Then you can upgrade the wheels and tyres to use Mini-Z tyers. I'm not sure if Japan open the air mail route to your country yet but check out banzaihobby for Mini-Z parts. Wheel set for every offset: bit.ly/2VeVZsc 1.5mm offset narrow wheels: bit.ly/2WSecRf Drift tyres: bit.ly/2I3a74k Wide drift tyres (in case you want to use wide wheels): bit.ly/2nZaLIw
@virtualpinball5065
4 жыл бұрын
@@BeaversHobby thanks a lot
@BeaversHobby
4 жыл бұрын
@@virtualpinball5065 My pleasure. Good luck with the project.
@e36m3ba
4 жыл бұрын
フロントタイヤの切れ角度が増えると、ドリフトの自由度が一気に上がる事に驚きました。
@cinedronefpv8783
4 жыл бұрын
Nice video
@AddyRCBuddy
4 жыл бұрын
Awesome video man, as the car itself. Gotta get one someday :D
@tlfbshti364
4 жыл бұрын
I'm surprised you didn't exclude the spacer for the top deck, just moving the ballstud one hole lower on the servo horn, and trimming the excess off
@BeaversHobby
4 жыл бұрын
Since I wasn't sure how much servo throw I would need, it's better to have more than less. I'll fix the steering anyway so we'll see if I will keep the spacer later.
@angkhanhtran7176
4 жыл бұрын
thank you very much
@ps6k4trk33
4 жыл бұрын
Super cool, i want one 👍👍👍
@dominikvanvugt331
4 жыл бұрын
Hello sir, i am really interrested in the hgd1, but i cannot find a shop that sells spare parts , in my expierience, rc cars brake every now and then...and the kit is to expensive to collect dust because of a broken axle or something. The support for atomic drz is way better where i live,but it doesnt has an option for 90mm wheelbase,what limits the body selection quite a bit...Is there any information on the company that produces the hgd1 and if they are planning to release different Upgrades or spare parts? Really appriciate your Channel,already helped quite a lot,stay Save! Dominik
@BeaversHobby
4 жыл бұрын
Unfortunately I don't know which manufacture made this car. However it's based on Mini-Q Q5OP so all the consumable parts are shared with Mini-Q and Mini-Z AWD. The parts you can't find are front bulkhead, servo mount, rear gear holder plate, side clip mounts and chassis plates which are almost impossible to break because they made of aluminium and carbon fibre. Unless you put 10500KV motor in and crash it into a wall at full speed that is... The things that can break like CVD, wheels, tyres, diff, spur gear are the same as Mini-Z AWD. All other parts are the same as Mini-Q. I'm sure this car will last, just like all Mini-Q does.
@RaafieNL
4 жыл бұрын
Nice review. Looks like a lot of fun. Too bad it's pretty expensive.. 240 euros for a 1/28th scale is pretty steep even though the quality seems very good.
@BeaversHobby
4 жыл бұрын
Yes, even the chassis alone costs as much if not more than 1/10 RWD. I have no idea why 1/28 RWD are this expensive either.
@foxhoundra6444
Жыл бұрын
Hey beaver's hobby, do you have a video of you adjusting the wheelbase? Also I need to see how the servo is mounted haha I got a metal chassis version on ali express, and it comes assembled without electronics or wheels. I am trying to figure out how to install stuff without losing all the screws haha it would be cool to see a video for it, but I understand youre probably working on other stuff by now.
@BeaversHobby
Жыл бұрын
Here are my build videos. These should help you with putting it together. Part 1 kzitem.info/news/bejne/oqyQtqCAcHiomII Part 2 kzitem.info/news/bejne/lmtsr3WMcaOWmZw
@adyjw33
4 жыл бұрын
Great Video!! You are Awesome!!
@ivanluhi
3 ай бұрын
Nice review, as always. Just got one (frame only) and while I'm waiting for it to arrive, I'm just getting confused about what servo I need, "micro" or "mini" servo or just a "5g" servo? There seems to be many size variations in each category. Was looking into AFGRC A06CLS or A11CLS or the cheaper B05CLS.
@gmodesike
3 жыл бұрын
Drift Master!
@ollilehtonen6764
4 жыл бұрын
The gyro enables automatic adjustable countersteer? That's neat and good for beginners
@BeaversHobby
4 жыл бұрын
This car is good for beginner but not because of gyro, it's because of massive steering lock that let you catch any drift. Gyro is necessary for RWD drifting and doesn't make it any easier for beginner. If this was an AWD car, yes, gyro will make it very easy.
@faishalaulias
4 жыл бұрын
Nice bro
@mikedyess1340
4 жыл бұрын
Man this is cool it reminds me of my xmod days I got a alot of them xmod with custom parts and mods
@killahkay2112
4 жыл бұрын
Great video man . I still can't decide between this and the DRZ . Both are expensive .... do you think it is possible to fix the slop in the steering ?
@BeaversHobby
4 жыл бұрын
Yes, I believe it's possible. I'll be working on that after I finish reviewing Mini-Q Q2 refresh.
@yackablejohnson1485
3 жыл бұрын
Hi. Does the budget Radiolink receiver feature the same options for limiting steering, gyro, etc? Also, it will work with the kit that includes the brushless motor? Thank you. I love your videos. They keep inspiring me to learn about 1/28 scale drift cars.
@BeaversHobby
3 жыл бұрын
Yes, it does. Radiolink has all the basic features just like an expensive one. It just doesn't have graphic interface when doing crawler mixing.
@DerperyPooslinger
4 жыл бұрын
Have you heard about the Leya DS1 3D printed chassis? Andrian Irawan has some videos on it!
@BeaversHobby
4 жыл бұрын
Yes, it looks really well designed. I kind of question the durability though (I have had bad experience with 3D printed chassis) but as far as the design goes, really good. Another interesting 3D printed chassis is PWK V2 which is designed for minimal scrub radius.
@Croccolucho
4 жыл бұрын
I think i want it NOW
@rcadventuresmalayalam3840
4 жыл бұрын
Pretty good
@hyunwoogoh9643
3 жыл бұрын
Hello Mr. Beaver I'm a middle grade student from south Korea, and Iove your videos because it is really detailed. Please keep doing this :) I want to get into micro drifting, because I want to drive it at home. Since I am new, I want to get some advices from you. My first question is that what do you prefer? -Brushless kit or brushed kit? Also, these kits include all things that I need, but except for the radio and the receiver. My second question is that I have a "futaba 3pv", which is the best radio that I have... Do you know which receiver / micro receiver that fits futaba 3pv at micro drifting car? If nothing fits, then what radio and receiver do you prefer? (I cannot buy expensive ones, so can you pick a cheap one?) -is it the one on the description link? Third, is Hgd1 noisy? I'm going to run it at home, and I live at a apartment, so I am not able to run it if it is noisy;; Lastly, is making the kit hard? I'm a noob at making these cars, so... I hope it is not to hard THANK YOU FOR MAKING ALL THESE WONDERFULL VIDEOS!!!
@BeaversHobby
3 жыл бұрын
Brush VS brushless depends on the kit you get. If it's HGD1 then brushed is a safer choice because generally brushless ESC that comes with this kit is not that good. Anyway, getting the brushless and change the ESC later on is also a good option. It depends on whether you want to spend a bit more for a better ESC or not. If you plan to keep it as it is, brushed. If you are willing to change the ESC later, brushless and it'll be better in the long run too. For other cars or if you can choose the ESC yourself, brushless is better. Futaba 3PV is good, no need to change that. The original receiver will work if the body is big enough to accommodate it. There's micro receiver for it too, here it is. bit.ly/2Xcwv2D Talking about noise; the drivetrain itself is quiet. However the thing that makes noise with this kind of car is the plastic tyres rubbing on the floor. If you have a wooden floor, forget it. It'll be extremely loud. You'll have to lay down some carpet or EVA mats to drift. As for rubber tiles that I have, it's not loud. Building HGD1 is not hard. However you'll need to look at the Mini-Q exploded diagram because it doesn't come with a manual. If you can, get some other car like Atomic DRZ V2 or GL Racing GLD. Those are much better cars as well and they are not hard to build and the manuals are very well-written which makes it much easier for a first time builder.
@luckypickle3982
2 жыл бұрын
Great video! Would you possibly know the maximum battery dimensions for the shortest wheelbase? Thanks in advance!!
@BeaversHobby
2 жыл бұрын
300mAh
@rc3151
4 жыл бұрын
Thank, love your videos they are really Well put together and love the style.
@cactuscat8009
4 жыл бұрын
Good video!😉
@SCW82492
4 жыл бұрын
Nice!
@rdbb-pv7et
4 жыл бұрын
Thanks for making all these really informative videos. Now that the HRC Arena GL Racing GLD is out, how does the HGD1 compare with with the GLD? BTW is the gyro basically the same thing as the HackSlider YE-0025?
@BeaversHobby
4 жыл бұрын
GLD is much easier to drift and very pleasant to build. However the parts quality can be a bit ropy as I was unlucky enough to get every known defects on my car. However it's undeniably a great car with pinpoint accuracy handling. Here's my first test drive with broken parts. kzitem.info/news/bejne/mI6etmqPcHV5hag I'm still editing the fix video and will have to film some driving as well to complete it. And yes, the Hackslider V2 is the same as this gyro. Now there's V3 with EPA setting so get that one instead. Mine is with AFRC badge. kzitem.info/news/bejne/0qGp2GtjoYV2Y34 I think YeahRacing will have the update as well.
@rdbb-pv7et
4 жыл бұрын
@@BeaversHobby Thanks for explaining this further and EPA settings.
@kl2633
2 жыл бұрын
Great video. Online I am seeing a chassis called HGV1. It’s looks the same as this HGD1 but cheaper. What is the difference? Is it just a knock off?
@BeaversHobby
2 жыл бұрын
Basically the same car but with plastic knuckles and some other plastic bits. I don't know if it's from the same manufacture but it's a cheaper option than getting a full aluminium chassis.
@RCTruck1688aa
4 жыл бұрын
nice video content
@leeboh87
2 жыл бұрын
Thanks for the great video. What is the tool that you have used to measure the camber angle and how did you measure the toe in angle?
@BeaversHobby
2 жыл бұрын
The tool for camber is the same one on 1/10. I think I got it with Yeah Racing brand or something like this www.rcmart.com/yeah-racing-3-in-1-camber-gauge-bu-for-all-1-8-and-1-10-on-road-cars-yt-0056bu-00030118 . You'll need to be careful because small cars are difficult to measure. As for the toe angle, I use this setup sheet (page 23) www.dropbox.com/s/4e7u09lsm70uuif/MIT%20Set-up%20manual.pdf?dl=0&fbclid=IwAR3Wpns2hQkXcM5BF2PG22oDGho00WlTlaavE87bCyEDYr9e7YppoAxq75Y . You can also draw a straight line on a paper, put the car on it in parallel and then use ruler to draw the wheel angle then measure that with a protractor.
@leeboh87
2 жыл бұрын
@@BeaversHobby thank you, you are too kind 👍🏼
@BeaversHobby
2 жыл бұрын
@@leeboh87 My pleasure.
@joshualockwood3321
2 жыл бұрын
Hi there, live the video and am looking to get one, do you know if you can get any spares for it at all?
@BeaversHobby
2 жыл бұрын
The spares are available on Alexpress. Still, most of the parts are cross-compatible with Mini-Q and Mini-Q and also the ball links are standard parts for any car so you can get those pretty easily.
@amarnath2935
4 жыл бұрын
Cool
@wesleyng7912
4 жыл бұрын
are there replacement parts for this kit?
@BeaversHobby
4 жыл бұрын
Yes, you can use most parts from Mini-Q Q3-Q7 which can be found on Aliexpress. Wheels & tyres are from Mini-Z AWD. And the parts that are not compatible are unlikely to break.
@wesleyng7912
4 жыл бұрын
@@BeaversHobby Thank you so much!
@BeaversHobby
4 жыл бұрын
@@wesleyng7912 My pleasure.
@defintelynotGeo
4 жыл бұрын
KANSEI DORIFTO?! NANI?!
@unick599
3 жыл бұрын
Hey Beaver! Thanks for your great Videos! Do you think the K989 electronic will fit in the cheapest hgd1 chassie without the electronic parts? Thanks a lot!
@BeaversHobby
3 жыл бұрын
Yes, it will.
@unick599
3 жыл бұрын
@@BeaversHobby great thanks! I think, I will try your K989 RWD Tuning first. But good to know...
@BeaversHobby
3 жыл бұрын
@@unick599 My pleasure. Good luck with project!
@BobBobsta
3 жыл бұрын
in your opinion what is the best hybrid car that can do racing and drifting with just changing wheels?
@BeaversHobby
3 жыл бұрын
Can't be done with RWD. You'll need an AWD for that. So either Mini-Q Q7, Atomic AMZ or GLA will be great.
@BobBobsta
3 жыл бұрын
@@BeaversHobby I thought about the wltoys k969 and some rubber tires. just trying to get into the mini class and want something hyprid to not spend to much money.
@BeaversHobby
3 жыл бұрын
@@BobBobsta Yes, K969 or K989 is the best in the budget category. It has a lot of room to modify as well so definitely go with that. I'd say K989 is better because it comes with open diff that can be locked for drifting. K969 comes with locked diff for drifting and will struggle if you want to drive normally or touring.
@BobBobsta
3 жыл бұрын
@@BeaversHobby what are the disadvantages and advantages of locket and unlocked diff then?
@BeaversHobby
3 жыл бұрын
@@BobBobsta Here is why a car needs differentials, just at the beginning and you'll get the idea. kzitem.info/news/bejne/xJ9rmpihm5WQdZg Locked diff is for drifting because there's no difference between 2 wheels and all the wheels get the same amount of power keeping them spinning to provide constant sliding especially with AWD.
@raffyturc
4 жыл бұрын
damn! much more expensive than droning! 👍
@DriftSpotLincoln
Жыл бұрын
I have 2 x 1/10 drift rc, and I'm thinking of buying a 1/28th, I've seen now you have reviews of so many chassis, if you were getting into it now, which would you buy? HGV2, Atomic, GLRacing, DriftArt?
@BeaversHobby
Жыл бұрын
DriftArt3 all the way. Atomic DRZ V3 also seems to be a good car although I haven't tried it yet. GLD is alright if you are OK with doing some upgrades. Anyway, with your experience from 1/10 DriftArt's tricky build should pose no problem to you. It will deliver the best out of the box driving experience.
@Tomzak11
4 жыл бұрын
trie to put a ruber bandconectin the knuckles on the sterin link point from knuckle to knuckle, the ruber band tension will take all the slop away, that is what i do on my 1/10 scale cars rhat have some slop
@BeaversHobby
4 жыл бұрын
Thanks for the tip! Will do!
@mtbtrial1112
4 жыл бұрын
Wow smallar!!!
@tomwright943
3 жыл бұрын
Hey dude, hope all is well 😎👌 I'm just having a go at trying to set this hgd1 up, I think I'm almost there 👍 I was just wondering as I'm a novice with rwd, what is best for a beginner..... a locked rear diff? or a ball diff? Also I was wondering what is the best servo and gyro for this scale rwd thanks dude 😎👌
@BeaversHobby
3 жыл бұрын
For this car I have to say ball differential. It's much easier with ball diff because I think it can let the other wheel slip so it's not too violent with the rear end and I have more control at low speed. Servo: AGF A11CLS. It might not seated exactly at the the centre (it's a bit narrower than original servo) so you might have to widen the servo slotted holes a bit and make it perfect. Fitting it directly is fine but if you are a perfectionist... a bit of filing is in order. Gyro: the standard one is actually really good but if you want the best without breaking your bank then get the PowerHD G1. It's on the verge of cheating, I'd say.
@tomwright943
3 жыл бұрын
Thanks for the advice dude 😎👌 what sort of tension would you set your ball diff at? Thanks 😊👍
@BeaversHobby
3 жыл бұрын
@@tomwright943 I got it pretty loose. Almost the same as a gear diff.
@tomwright943
3 жыл бұрын
Thank you 😊👌 I'll give it a go 👌
@tomwright943
3 жыл бұрын
Sorry about this dude lol, what tyres would you recommend for the hgd1? Thanks👍
@jackchristopherson3891
3 жыл бұрын
Just found the transmitter and receiver I wanted today, but I had this car picked out yesterday and it just "stopped selling" last night :(
@BeaversHobby
3 жыл бұрын
You can still find it on aliexpress. www.aliexpress.com/item/4000751651146.html But you can also get other cars at around the same price that's better than this like Atomic DRZ V2.
@bulubetis1331
4 жыл бұрын
Nice vid as usual,, How about miniq tr-q8e chassis? Is it same as hgd1?
@BeaversHobby
4 жыл бұрын
There are a couple of Q8s which non of them are from Sinohobby (original Mini-Q manufacture). I've seen Q8 in Aliexpress which is actually Q5OP that I mentioned in this video. The other one that got Q8 name is from some shops that decide to import HGD1 and call it Q8. So, check it thoroughly before buying. If the Q8 you see is AWD or 4WD then it's Q5OP. If it's RWD then it's HGD1.
@bulubetis1331
4 жыл бұрын
@@BeaversHobby whoaa,, that's why, i can't find any information about q8 in sinohobby website, thank you
@q8hektor
4 жыл бұрын
Awesome do you have rtr kits ? I want one
@BeaversHobby
4 жыл бұрын
There's RTR in Aliexpress. www.aliexpress.com/item/4000212209722.html
@stevenchoy3071
Жыл бұрын
hi beaver, can u recommend a motor & esc for hgd1, and what motor size can fit in, thanks a lot if u can recommend
@BeaversHobby
Жыл бұрын
The motor size is called 130 in general. There are many names for brushless, 1410, 1625, 1525 and 1626. They are all the same size anyway. The best budget set is Surpass Rocket V2 3500KV or 5500KV depending on how big is your track. For small track under 3M width 3500KV will do fine. Otherwise 5500KV will give you more speed for larger track. Of course you can get the fast one (5500KV) and use a smaller pinion to tune as well. As for the ESC it depends on where you are, for some DasMikro V3 on Aliexpress is cheaper and for the others PN Racing V2 is cheaper. Pick either one you can buy. They both use Hobbywing program and are very good.
@Electricfy706
4 жыл бұрын
Is there a different between brushed and brushless motor in throttle? I know that brushless are generally smoother throttle.
@BeaversHobby
4 жыл бұрын
I find brushed motor smoother at low rev. The brushless motor that is smooth is expensive because you'll have to get a sensored system. Sensorless will have either little cogging in the low rev or starting speed is a bit higher. However brushless has better power delivery so once you punch it you can feel the torque coming in hard.
@milan-mn7gh
4 жыл бұрын
Is the link the biggest package? I'm on phone, and I don't see it.
@BeaversHobby
4 жыл бұрын
The link is for all packages. You can choose the NO. to get different package. 01 is chassis only, 02 is brushed motor and 03 is brushless motor.
@milan-mn7gh
4 жыл бұрын
@@BeaversHobby Thank you. So if I buy it i got the full car.
@BeaversHobby
4 жыл бұрын
@@milan-mn7gh Yes, no.2 (US$228.76 ) and 3 (US$258.76). Choose either one you like. Don't forget a radio and body if you haven't got one yet.
@admiralisshobattousai2806
3 жыл бұрын
hi beaver!, do you have any review on Mini-Q8 RWD drift 1/28 chassis?..do you have any opinion on this chassis? thank you!
@BeaversHobby
3 жыл бұрын
This HGD1 is the current Q8 RWD, it's alright. You can get Atomic DRZ V2, GL Racing GLD and BMR-X at roughly the same price so I recommend those instead. They are much better.
@mr.smooth05
2 жыл бұрын
Was there soldering involved in the assembly of the hgd1 kit?
@BeaversHobby
2 жыл бұрын
Normally, no. The plugs are all standard JR and the ESC has JST RCY for battery so most of the batteries will use that already.
@hasanh7698
2 жыл бұрын
Do you think the chasis fits a 1:24 scale model kits body? Especialy from tamiya. Been dreaming of having mode kits with rc capabilities
@BeaversHobby
2 жыл бұрын
Yes, it'll fit. Here I use Tamiya 300ZX with this car. kzitem.info/news/bejne/yaiL2Gaig6qinqA
@wesleyng7912
4 жыл бұрын
does the kit require any soldering to be ready to run? also is the 2mm spacer under the top deck included?
@BeaversHobby
4 жыл бұрын
It doesn't require any soldering. The 2mm spacer isn't included. But you can also move the ball down one slot and cut the servo horn. This will decrease the steering angle a bit.
@2k8franky
Жыл бұрын
Hey beaver, do you think the HGD1 will be compatible with the mini q9 front and rear gear box to convert it to a HGD2? I’m trying to accomplish individual suspension like the new HGD2
@BeaversHobby
Жыл бұрын
I'll have to re-check it but as far as I remember the gearbox is slightly different between kingpin suspension versions (Q3-Q6) and the wishbone suspension (Q7, Q9... which is cloned Q7). The front conversion is going to be difficult since it doesn't allow much steering angle on Q7/Q9. The most you can do is make the rear double wishbone.
@MadMax-hq6uq
4 жыл бұрын
Hy Beaver! Many thanks for the interesting review, I'm thinking about converting a miniq tr-q5OP in a sort of hgd1, what do you think about it? Best regards!
@BeaversHobby
4 жыл бұрын
The differences are in the front bulkhead and chassis plate at the front. You'll have to make the front bulk head not in the way when you steer and trim the chassis so the wheels can turn to near parallel. All of these can be solved if you have a 3D printer or a CNC machine or a metal cutter to make your own parts.
@MadMax-hq6uq
4 жыл бұрын
@@BeaversHobby Thank you! I think I will give a try!! 😅
@BeaversHobby
4 жыл бұрын
@@MadMax-hq6uq My pleasure. Good luck with the project.
@ivanparga3825
Жыл бұрын
Hey beaver, is a good choice to enter to the hobby with a rtr hgd1? I dont know if I could afford to buy a XRX 😅. Thank you for this amazing content
@BeaversHobby
Жыл бұрын
I will still work even though it's not that good nowadays. Take a look at TG Racing. That might also be in your budget. www.gt55racing.com/products/tg-racing-1-24-1-28-rwd-drift-car-kit-formal-edition-without-electronics-sky-blue
@ivanparga3825
Жыл бұрын
@@BeaversHobby how would It be to build a budget brushed set Up, more or less with 250-280€? (With other Chassis that isnt the HGD1) Thank you for your help, is kinda hard to enter to the hobby
@x.Clippy.x
7 ай бұрын
Hey Beav, what is the best battery to use on these? I cant tell what I got with my kit as its blank. Want a battery that is super strong to slide better on carpet (hoping). Would I want 60C+? Hard to find small batteries with high C. If you have a suggestion im all ears!!
@BeaversHobby
7 ай бұрын
You don't really need 60C because even the battery can delivery that, the wire can't. I normally use Marka 350mAh 50C and I doubt it even draws that much. Burst, probably but 40C will be alright. If you need more power take a look at GNB HV. I have some 350mAh 7.6V and they are great. There are larger capacity too like 450mAh in case you want more run time.
@x.Clippy.x
7 ай бұрын
I wound up tryin these 450mah Blomiky's that are only 25c and tbh it feels fine. Ill try a stronger battery though to see if it really makes a difference. Next goal is to figure out how to get more stability on the steering arms.. I knew of the issue before I got it in hopes I could fix it but cant figure it out xD @@BeaversHobby
@thomasgermain9612
2 жыл бұрын
I really want to get these but the electronics included are way overpriced. Can you suggest alternative electronic set?
@BeaversHobby
2 жыл бұрын
Yes, certainly. You can get a brushed system. A FK130 motor with DumboRC 10A ESC should not cost more than $15. If you prefer brushless system then Surpass Rocket motor is what you need. It's about $22-25 a piece and I recommend DasMikro ESC, it'll be about $30-40. However if you are OK with having a big ESC then Hobbywing EZrun 18A will cost about $20-25. Do not get the Surpass Rocket combo, while motor is great, ESC is the worst you can get. As for the gyro, you can't really skimp on this one. Get something like AGF-GY04M or AFRC GYS-2 V3. It'll cost around $30-40 but it'll be all you'll ever need.
@thomasgermain9612
2 жыл бұрын
@@BeaversHobby thanks beaver I appreciate the thorough reply.
@Torkait
2 жыл бұрын
Ask a question Should you choose between motor 3500kv or 5500kv?
@BeaversHobby
2 жыл бұрын
Depending on how big the track is. For under 3x3M 3500KV is good. Otherwise get a 5500KV.
@siebzehn9170
4 жыл бұрын
Hello again. Please tell me where you bought all your body. I especially love ae86. Please
@BeaversHobby
4 жыл бұрын
This AE86 body is from Firelap, I think you can find it on Aliexpress. My other bodies are from Mini-Z, I bought them (mainly) from Japan. Here's the link to that shop. bit.ly/2CGgozp
@siebzehn9170
4 жыл бұрын
Banzai hobby dont ship to indonesia. Sad. Thanks for the reply.
@BeaversHobby
4 жыл бұрын
@@siebzehn9170 You can probably find them in a Kyosho dealer near you.
@renz1013
4 жыл бұрын
I want one of these kits if teen age money can afford it and put my custom jeep body on it
@samjackson176
4 жыл бұрын
I’m looking to buy/build my first Mini Z size AWD or RWD drift car, I’d like to fit a 90mm Mini Z body. Do you think this is my best option? I looked at the Q7, but I saw you mentioned the pinion is impossible to find for 90mm. Any other suggestions? I’m new to this scale RC, Thanks.
@BeaversHobby
4 жыл бұрын
Either this or DRZ v2. www.miracle-mart.com/store/index.php?main_page=product_info&products_id=14329 HGD1 is easier to build and cheaper but DRZ v2 has more adjustability.
@mr.smooth05
2 жыл бұрын
Does it come with the body mount? If so, can i use the body mount on multiple bodies without the need to buy more?
@BeaversHobby
2 жыл бұрын
The body mount parts are from the body. The front lips are unique to each car. You'll get all of the necessary parts when you buy a body so there's nothing to worry about.
@demonslayer9772
2 жыл бұрын
Do you need any extra parts to adjust the wheelbase other than what is included in the box? Thanks.
@BeaversHobby
2 жыл бұрын
No, you don't need anything else. All the parts are included.
@demonslayer9772
2 жыл бұрын
@@BeaversHobby thats awesome. I might pull the trigger and get one
@strikermaximus365
4 жыл бұрын
Please make Life size for better lifestyle.
@0ffinnsive
3 жыл бұрын
Hi beaver, would you say this is still a good value for money kit or should I invest in newer kits like the xrx dpa?
@BeaversHobby
3 жыл бұрын
Get a newer, better chassis like GL Racing GLD or Atomic DRZ V2. XRX is also a great choice if you can get the chassis only version.
@0ffinnsive
3 жыл бұрын
@@BeaversHobby I could only find xrx with electronics. Is this not very good?
@BeaversHobby
3 жыл бұрын
@@0ffinnsive It's actually great but it's much too expensive because they'll give you aluminium case ESC which is fantastic for heat dissipation. However they charge it like 2-3 times the price of the plastic case version. Motor is also really good, it's Surpass Rocket V2 so nothing to worry there. Just ask if you can get the V2 or V3 gyro with EPA (end point). All in all, it's great if you don't have anything else yet or don't intend to use your own electronics.
@makewithmegma
4 жыл бұрын
👌👍
@cityofplant
3 жыл бұрын
Hey beaver, Does the mini q brushless esc have low voltage cut off?
@BeaversHobby
3 жыл бұрын
Yes, it does.
@Weaselpro
4 жыл бұрын
Hi, what is this nice red-white fences you use?
@BeaversHobby
4 жыл бұрын
It's 3D printed guard rail I got from my friend on Facebook. He printed it for me. I think you can find similar things on thingiverse as well.
Пікірлер: 426