Still wonder why they say “self igniting “ as it’s really not. You have to light it 😂 Good video
@michaelerbreviews
6 ай бұрын
I kind of know what you mean but I disagree. It is self-igniting in the sense that you do not need to use an external ignition source such as a match or lighter. It is self-igniting using a built-in piezoelectric spark.
@gilbertsung610
4 жыл бұрын
Thank you, Michael. Your explanation is clear and more than the manual can tell me. I'll subscribe you.
@barbarajohnson7782
5 жыл бұрын
Thanks Micheal for sharing! I always enjoy your videos and find them very helpful!
@patrickzadd5215
10 ай бұрын
your video is one of the most concise….. thank you
@michaelerbreviews
10 ай бұрын
You're welcome!
@bigmike1015
8 ай бұрын
Great help! Thanks mate 🙏
@michaelerbreviews
7 ай бұрын
Glad it helped!
@dmitrygear
3 жыл бұрын
Just got mine 771 - thanks for the vid. Very helpful!
@michaelerbreviews
3 жыл бұрын
Glad it helped!
@radhwangothic
Жыл бұрын
Very informative! Thank you so much
@azizhachimi8744
Жыл бұрын
Great Hreat review Sir, subscribed!
@michaelerbreviews
Жыл бұрын
Much appreciated!
@arturotorrescano1845
2 жыл бұрын
Que medida el la entrada. Del gas o la boquilla. Que debe de entrar Al. Deposito de recarga…?
@mihaipopa9414
2 жыл бұрын
Nice video, thanks!
@chewykarma
3 жыл бұрын
Good job. Useful info. Thx
@michaelerbreviews
3 жыл бұрын
Thanks. Glad you found it useful.
@cherylkrasucki591
5 жыл бұрын
How do you put on the other tip? The standard tip can just drop on but cant figure out how the other tips go on?
@michaelerbreviews
5 жыл бұрын
Cheryl Krasucki I explain how you put tips on at 4:39
@joliele-vu3824
2 жыл бұрын
Hi Michael, am I to hold on to the "Inition" at all times while using this for soldering? Thank you.
@michaelerbreviews
2 жыл бұрын
If you want to keep the flame going you would then lock it on using the lock function as I demonstrate at 2:31
@Apiarist_X
3 жыл бұрын
Can you tell me please, what is the diameter of the flame pipe? If I purchased on I would like to add an attachment that needs a diameter of 22mm.
@michaelerbreviews
3 жыл бұрын
14.26mm or 15.5mm when the flame guard is in place.
@WaschyNumber1
2 жыл бұрын
If you use a water sponge, you will destroy over time the soldering tips.
@joeh690
4 жыл бұрын
What would you want to use the heat shrink tip for versus the deflector tip for ?
@adama1294
Жыл бұрын
Bigger heat shrink.
@luisgomez385
2 жыл бұрын
Quick question I was given this exact same torch but the flame is so small even when moved to max. What would be the problem?
@michaelerbreviews
2 жыл бұрын
Are you certain you filled the butane tank properly? If there is a lack of pressure, that could explain the lack of flame.
@luisgomez385
2 жыл бұрын
@@michaelerbreviews Yeah I double checked. The pressure is what I'm thinking as well. I'm just going to leave it alone for a bit before I do anything to it.
@tristineckhoff2843
Жыл бұрын
Take your can of butane and and just like when you fill it up just put a shot of butane where the flame comes out, it will clear out anything gummed up in it.
@normanklein3155
5 жыл бұрын
What is the purpose of the deflector tip? What application is it designed for?
@michaelerbreviews
5 жыл бұрын
The 'deflector' allows shrinking insulation tubes on electrical wires after done with soldering
@edwincastillo8280
3 жыл бұрын
Do you know if the pen version of this same brand will do metal on metal soldering, or just this particular one.
@michaelerbreviews
3 жыл бұрын
I have no first-hand knowledge of that, sorry.
@edwincastillo8280
3 жыл бұрын
@@michaelerbreviews ok thanks
@italomolina6583
3 жыл бұрын
is this torch suitable for propane gas?
@michaelerbreviews
3 жыл бұрын
Butane only
@oryno2293
4 жыл бұрын
Its not full the pressure in the Tank and torch are even
@DARKxARCHANGEL28
3 жыл бұрын
This tool is identical to the dremel one
@michaelerbreviews
3 жыл бұрын
I have not seen the Dremel torch but it is not uncommon for the same product to be sold under different brand names.
@leilahankinson4498
3 жыл бұрын
I totally disagree, the case is very nice and even padded. you don't get more than with others. but the pamphlet IS however, sparse
@leilahankinson4498
3 жыл бұрын
AND....the stand is better than other!!! not such a great review for my little awesome torch. I really recommend this torch for light duty jewelry soldering
@michaelerbreviews
3 жыл бұрын
The case is cheap plastic and the locking tabs will eventually break. The stand is ridiculous. It has a small amount of mass compared to the top-heavy torch enabling the the torch to fall over quite easily if it is bumped or the table you are working on gets bumped. The torch itself is fine.
@bobjohnson48
2 жыл бұрын
He needs to invest in a table for demonstrations! 🙄
@michaelerbreviews
2 жыл бұрын
Yes he should
@therandomnessoftheuniverse
3 жыл бұрын
unsafe usage is very dangerous and hes showing some very poor handling disappointed
@michaelerbreviews
3 жыл бұрын
So sorry you are disappointed. This was a quick review of the torch kit and a brief discussion of its operation.
Пікірлер: 47