Exactly what I wanted to see... I ordered one and was looking around for torque videos and this is just what I needed... thanks... I’ll do a video on mine when I get it also.. 👍👍👍
@makermentality1031
5 жыл бұрын
STEFAN CARIBBEAN T&A thank you that was my goal of these videos. It’s what I would want to see so I’m glad I was able to convey the performance well enough to help out. 👍🏻
@fowlman7254
2 жыл бұрын
The setting before 2..is 1.. and the setting after 2 is 3... they did that to avoid make it look less cluttered
@myshots101
4 жыл бұрын
Good demo. Just what I wanted to know about this small drill.
@NWGR
4 жыл бұрын
Very impressive. I plan on grabbing the non-hammer version of this drill to go with my M12 surge. I never work with concrete or brick, so no need for the hammer feature for me. Keep it up! Great videos! Subscribed.
@jasonm6111
3 жыл бұрын
Regardless the drill is jumping out of your hands, the M12 Milwaukee fuel line can put out some competition. 18v can probably do the job easier but for 12v, it can surely do the job as well. And it’s lighter weight. Perfect for doing the job that you do.....and more if need be.
@djjinerson
2 жыл бұрын
The one thing I learnt was youz a MadMan insanity flowith through dem red white and blue American veins. Wrist breaker 2.0
@devilefan
5 жыл бұрын
Dude I love your videos.... I am subscribed.... and you more than sold me on that drill driver and the impact for that matter..... it was impressive enough what that hammer drill was able to do but oddly enough it was just as impressive for what it couldn’t do at least not all the way do....Milwaukee has definitely hit a homerun with this
@makermentality1031
5 жыл бұрын
RICH REVIEWS check out the video where I make a completely needed handle for it
@devilefan
5 жыл бұрын
ADD Workshop ....Definitely will have to check that out
@kvernesdotten
2 жыл бұрын
I have this one and that clutch is by far the worst part of it. The whole point of the clutch is to limit power, it doesnt limit near enough on the lower ones imo. Also that annoying ramp up "soft start" or whatever they call it makes clutch settings even less usable to me. Other than that I really wish it would come with some sort of handle as does have quite a kick, especially if it binds up. That aside the drill is really good overall and along with its m12 impact they are by far my most used tools
@kvernesdotten
2 жыл бұрын
Haha I didnt see the part where it bound up with the big hole saw until after writing this. That binding seems to happen from lack of speed, not power from my experience, the bigger drills tend to spin quite a bit faster like 2000+ rpm
@steveb611
4 жыл бұрын
I actually had 18 volt dewalt hammer drill and impact and sold both of them for the Milwaukee M12 line.I'm just DYI around the house they work perfect that Gen 2 impact man that's awesome drill. M12 line is almost keeping up with the 18 volt line
@makermentality1031
4 жыл бұрын
i completely agree i had ridgid 18v and i haven't touched them since i got the m12s
@steveb611
4 жыл бұрын
@@makermentality1031 I'm curious about their M12 jigsaw wonder how it compares to an 18 volt I like the smaller and they're just easier to manage great videos I enjoyed them u should do more
@joshcooper2332
5 жыл бұрын
Great channel, man. Keep it up!
@makermentality1031
5 жыл бұрын
Josh Cooper thank you very much
@allenjackson1371
4 жыл бұрын
Enjoyed this video keep them coming
@funguy7873
4 жыл бұрын
That drill is almost too powerful for that size 😳
@rafsanuddinbegrizan8090
5 жыл бұрын
best video..keep it up
@djjinerson
2 жыл бұрын
I got one coming in to go along with my m18 fuel hammer. I was hoping the clutch wasn’t as aggressive as the m18 but it seems as it’s the same :( that damm thing almost sounds like my m18 fuel with an ho batt one thing milfuukee has is power
@jesterraj
Жыл бұрын
Do you have the gen 1 to compare it with?
@happyguardian2000
4 жыл бұрын
electronic clutch is the deal killer
@adrianboston8482
4 жыл бұрын
I have M12 fuel 2gen impact ! My drill is a DeWalt 996 hammer !👍
@makermentality1031
4 жыл бұрын
heck yea that drill is a beast my brother has one and everytime ive used it ive been thoroughly impresses...he wont let me take it apart tho lol
@Mixwell1983
3 жыл бұрын
Get some damn torx and throw away those philips. Haha.. i ordered the combo kit that came with a bonus 3/8 ratchet for $229.. its coming in 3 days and I cant wait. Fyi those half settings are the odd numbers.. notice all the display numbers are even?
@mbpgreg
4 жыл бұрын
Hello, the second generation machine is manufactured in which country?
@LawAbidingCitizen117
4 жыл бұрын
Anyone having heat issues (drill got hot) when using this drill for prolonged time, almost non stop for more than 10 minutes?
@theitalian556
4 жыл бұрын
Haha clamps man! Nice demo still!
@jayramirez7827
5 жыл бұрын
I'm sure this looks wonderful haha
@gladbandanna
3 жыл бұрын
SPIDER GIANT SPIIIIDER IN THE LEFT CORNER! LOOK OUT
@brendancaldwell5376
4 жыл бұрын
How about that big ass spider on the left wall 🤣
@ghostghost8136
4 жыл бұрын
Haha. You crack me up!
@rick2254
3 жыл бұрын
Ha man I bet you are really bruised up after making this video.
Пікірлер: 34