Great video... i was on the fence on ordering this kit.... will be ordering it tonight after watching this video
@TheRedneck0710
5 жыл бұрын
The information about the suspension in relation to distance from the fender to center of the wheel is very helpful. Thanks 👍🏻
@bradnewberry8004
5 жыл бұрын
Looks great Dustin, keep up the great work 👍
@jeffreymiller9819
Жыл бұрын
I’ll have mine kit for my 2004 gmc 2500hd glad I watched your video I also order the air bags for the back
@WillCtheMechDrummer
4 жыл бұрын
Subscribed! Nice vid!
@Man_in_a_Gucci_Suit
5 жыл бұрын
I’m just now doing a zone 4.5” lift for my 2014 silverado
@jeffreyclark6591
4 жыл бұрын
Just had a 3 inch lift installed on my 2020 2500 Silverado and the measurement from center of rim to bottom of fender is 28 1/2 inch and rough as hell driving. But dropping it 3 1/2 inches to 25 it would look like hell. Right now it is level.
@Man_in_a_Gucci_Suit
5 жыл бұрын
I hear going over 2.5” is bad for your ball joints when you don’t do a full lift kit glad you went with upgraded upper control arms
@ELKOBRA03
2 жыл бұрын
Because of this video I bought this kit with control arms - I didn’t want to go with a 4 inch loft lift - so I went this route and I love the look 👀- but I just figured out why my truck runs super rough lol - I need to lower it down in the front a bit to smooth out the suspension lift
@DustinT
2 жыл бұрын
Yep! That will help. I just threw a new set of tires on this truck, looks so much better with this lift/stance now.
@monetsengnalivong6471
3 жыл бұрын
Ima loft my my stock lift are cool but ima add a 2.5 lift kit n upper control arm n throw on some 20x12 -24
@10temptuous
4 жыл бұрын
Do you have a pic of your CV angles after the install?
@bigchungus7720
3 жыл бұрын
I’m think of getting this or the zone 🤔
@brandonledoux8502
2 жыл бұрын
Did your 2004 duramax have factory blocks or no mine has 2inch factory blocks in the rear
@bigdog2000able
4 жыл бұрын
with this lift will 285/75/16's rub?
@jordanelliott935
10 ай бұрын
Any issue running this lift at 2-2.5” instead of 3”?
@themechanic568
3 жыл бұрын
You did the control arms backwards.
@riveraf5053
4 жыл бұрын
Can you use that lift for Chevy 1500 and 2500hd or are there two different lift for each
@logansmart3551
4 жыл бұрын
The lift is specific to each truck.
@monetsengnalivong6471
3 жыл бұрын
Where did you buy the lift kit i got my 05 gmc sierra 2500hd I wanna lift the from up n drop the back down a bit
@shawncordeiro1150
4 жыл бұрын
having your keys all the way down did you get any lift vs keys turned up when truck was stock ? what was the point in the lift ?
@WillCtheMechDrummer
4 жыл бұрын
Stock keys or even aftermarket keys cranked won't ride the same. Especially with stock length shocks. Either need extension brackets or longer shocks. Plus the new upper control arms allow for more "wiggle room" of the front end. Stock UCA's will hit the bump stops. My last truck had this lift. I just snagged an 07 Sierra CC LBZ. I'll save myself the BS from the last truck and go with a full 6 inch like I've done in the past. This guy is correct with how the level kits rides if cranked too high.
Пікірлер: 24