perfect and precise tutor on nosing profile. thanks a lot. 🙏🙏
@meirsibony1895
6 жыл бұрын
Great & very well done. many thanks
@DzanTa
6 жыл бұрын
meir sibony Thank you. Please let others know and subscribe.
@anastasiaiglai4915
7 жыл бұрын
This was super helpful! Do you know how to edit the tread so there is a profile on the underside of the tread? Trying to create a 3D detail on the underside of each tread on a staircase.
@DzanTa
7 жыл бұрын
Yes....steps: 1. Create Stairs 2. Create new profile family for tread profile 3. Set custom profile category as Stair Tread usage within Family Categories/Parameters 4. Load into Projject 5. Tab select the stairs (not the entire stairs...just the stair component that makes up the treads/risers) 6. Go to Type Properties 7. Under Treads section, specify your custom Tread Profile to be used....adjust the profile sketch as needed.
@DzanTa
7 жыл бұрын
PS....please like, share, subscribe, etc. Thanks!
@anastasiaiglai4915
7 жыл бұрын
Thank you so much! The stairs look great!
@DzanTa
7 жыл бұрын
You're welcome...can I see what you created?...send to dzanta@gmail.com
@BertiBIM-hf8wx
4 ай бұрын
could you update this tutorial to version 2022,23,24?
@DzanTa
4 ай бұрын
definitely
@DzanTa
4 ай бұрын
Here you go.... kzitem.info/news/bejne/k6uLyXaHsqmclI4
@BertiBIM-hf8wx
4 ай бұрын
@@DzanTa Thank you very much. subbed and a like
@fercardosod94
6 жыл бұрын
Thank you!
@realbigmic
3 жыл бұрын
Thanks Dzan :-) was hoping to be able to nominate contrasting material for the nosing??
@DzanTa
3 жыл бұрын
Perhaps look at paint command
@kristinamasyte2966
5 жыл бұрын
Hi. How to apply material only for nosing element?
@DzanTa
5 жыл бұрын
as of now, nosing material is not a separate parameter that you can adjust. You will most likely need to try the Paint command or use an in-place family with custom material assignment.
@kristinamasyte2966
5 жыл бұрын
@@DzanTa Thank you for your response. Is there a way to create a nosing profile for a precast stair type? I try to create L shaped profile but when I import it, the object appears only on thread surface. A part which is supposed to be on riser face remains merged. Any ideas on how to fix it?
@DzanTa
5 жыл бұрын
@@kristinamasyte2966 you will need to create an in-place family with the stairs in context to help define the shape of the nosing. Start with a side view, start in-place component command, use extrusion or sweep boolean operation. Sketch lines that define the shape of the nosing profile then copy/paste this sketch to all other treads so all the nosing acts as a single in-place family. Then apply material to this in-place component.
@paan8811
6 жыл бұрын
where can i have the family
@DzanTa
6 жыл бұрын
you can easily create the custom nosing profile using the Profile Nosing.rft file. This is located in your standard family templates folder
@paan8811
6 жыл бұрын
Dzan Ta i dont have it in my family folder..can i download it somewhere?
@DzanTa
6 жыл бұрын
if you are using windows 7 pro OS, it is located at c:\programdata\autodesk vt 2018\family templates\english-i
Пікірлер: 27