Can’t wait to watch, been binging irl hidden blade videos. Love the designs.
@RAWICE511
4 жыл бұрын
Thanks for checking it out brother 😊
@noahpollack5358
4 жыл бұрын
Man I wish I had a place and things to make this stuff
@CWGminer
4 жыл бұрын
This must have phenomenal print quality! Will you ever release the STLs, for free or for a price?
@renchesandsords
4 жыл бұрын
Just realized! this mechanism is legal in Canada, unlike the old ones, because this is manually extended and retracted, meaning that it would not be considered a spring-loaded or gravity extended blade
@rjoconnor9275
4 жыл бұрын
You just made my day with that knowledge
@panikrev175
4 жыл бұрын
Nope, this would still be illegal to carry; Memorandum D19-13-2 Sec.18: Automatic knife - Opens automatically by applying hand pressure to a button, spring, lever, *or other device, in or attached to the handle of the knife, including knives that have a button, spring, lever, or other device* located in the spine of the handle and attached to the inner part of the blade.
@renchesandsords
4 жыл бұрын
@@panikrev175 So any knife with a "device" in it is prohibited?
@panikrev175
4 жыл бұрын
@@renchesandsords If that device is built into the handle, is attached to, and actuates the blade, yes, it would violate Canadian Criminal Code. Knives that have a 'thumb stud' attached to the blade of the knife, that is independent of the handle (not protruding from the handle in the closed or folded position), and that open by applying pressure to the thumb stud would generally be considered 'legal'.
@renchesandsords
4 жыл бұрын
@@panikrev175 Ahh, I see, that sucks, but thank you!
@DayTempo
4 жыл бұрын
Engineer of the century 🙏🏽
@RAWICE511
4 жыл бұрын
Ayy Cheers brother! 🤙
@giomr7923
4 жыл бұрын
This is so damn amazing, I wouldnt mind if there wasnt a double version when this one is already perfect
@Kronos0999
4 жыл бұрын
Different strokes for different folks. :)
@DivyanshusCreation
4 жыл бұрын
Good mechanism 👍👍👍
@ilnamcho9248
4 жыл бұрын
Ubisoft be like: he big brain
@KayhoticGames
4 жыл бұрын
this is amazing work! would love to see it made in full metal
@baguingi5589
4 жыл бұрын
Amazing design cant wait to see the full blade. Keep it up!
@ProactiveYellow
4 жыл бұрын
Suggestion: put a tiny little tab on the front of the casing to act as a stop for sleeves. The fully enclosed ammnra wheel means the only external moving part is now the blade, so you can easily conceal it for things like Desmond cosplay. The only issue would be the cuff of a jacket or shirt covering over the blade-way. Easily solved with a small nubbin or tab on the top of the case to catch the cuff.
@caceresmauro9767
4 жыл бұрын
This is so good man, i'm excited for the last video and the extended version!
@RAWICE511
4 жыл бұрын
Thankyou and me too!
@IlMemetor72
4 жыл бұрын
I cannot wait for my new hidden blade. And make Leonardo jealous.
@joaquingutierrez1011
4 жыл бұрын
Can't wait to get one of these!
@haunswurznzopf4319
4 жыл бұрын
Your design is ingenious! Can‘t imagine all the time yöu must have spent researching, tinkering and working out tolerances to make it print and move properly! Mad respect!
@lordmax-2002
4 жыл бұрын
Frick me you're bringing my dreams to live
@MrStreaty122
4 жыл бұрын
You could, in theory, refine the design a bit further and send it to a metal working shop with a multi-axis CNC and have some of these components milled from aluminum or steel to make the individual components even smaller, making the whole thing smaller, lighter, and quieter since you’d be able to oil the whole things internals
@everfreebrumby8385
4 жыл бұрын
This looks great. But I like the look of the traditional mechanism
@fgc7606
4 жыл бұрын
Looking good
@assassinviii6477
4 жыл бұрын
Looking phenomenal! Can’t wait
@Dinoslay
4 жыл бұрын
That’s some steampunk level stuff. Well done.
@hedgehogtc1277
4 жыл бұрын
OMG NEW VIDEO I LOVE I WAS WAITING SO LONG!!!!! LOVE YOUR VIDS RAWICE!!!!!!!!!!!!!
@RAWICE511
4 жыл бұрын
Thankyou brother ❤️
@SRvAZAZAL
4 жыл бұрын
I absolutely love watching these videos, i've been hoping that someone would try to make a functional hidden blade, the blades look awesome and imma buy one when i have enough money also have you ever thought about attatching a bracer to the main plate so that the blade is lifted away from the wrist?
@tophatdevelision5098
4 жыл бұрын
When will they be in stock again , also wver tried using a real blade
@RAWICE511
4 жыл бұрын
I think the materials will arrive in 7 days so around then!
@tophatdevelision5098
4 жыл бұрын
@@RAWICE511 ok thanks foe that, also i just realised using a real blade would cost alot more
@carlospittet8530
4 жыл бұрын
Bones the tophat yeah, to make it metal he’d have to buy a plasma cutter, and he’d have to make the blade without gears, which would cost so much more
@alex2002cruz
4 жыл бұрын
these designs are amazing!! I can't wait to see the finish product. And who knows, maybe you could probably put a real blade in there.
@TheJarmag
4 жыл бұрын
I'd love a design of the Phantom blade, not even with the functioning crossbow I just want a cooler blade my my cosplays then the $40 toy lol
@Eleven7D7s
4 жыл бұрын
Wow this is incredible! I'll be sharing this video!
@Kronos0999
4 жыл бұрын
I feel like the amount of testing and effort you've put into making this is sometimes overlooked by how good it turned out. Real good job, dude.
@Kronos0999
4 жыл бұрын
Although a PS5 or this...
@Eye_D_27
4 жыл бұрын
Replace the ring with a velcro and wrap it around your palm
@patrickgamo5959
4 жыл бұрын
Mate you could also angle/slope the side of the blade piece that could catch on that slider piece so that it guides back into the track? Might work
@RAWICE511
4 жыл бұрын
I thought of trying that but I’m a bit of a perfectionist so the rail system seemed like the better way to go as it also adds lateral stability to the blade 👌
@patrickgamo5959
4 жыл бұрын
@@RAWICE511 good stuff mate. I'm excited to see how things turn out!
@SG_Exel
4 жыл бұрын
I'm going to be stalking your etsy shop until the store drops the blades.
@peter.a.7255
4 жыл бұрын
Bro u make my hands shake when u make any hidden blade vids keep it up
U can try increasing making it with a metal blade it would be awesome but ul just sell the plastic one
@lazybobby2404
4 жыл бұрын
Just wondering, can you post the 3d models/STL files? I really want to try and make this
@יואברז-ו9ע
4 жыл бұрын
I like gears The can create a lot of power and movement
@SLAYTET
4 жыл бұрын
Could you please shoot a video for detailed construction of Assassin's Creed Unity phantom blade? I would be very glad, you are loved.
@denzelsantos119
4 жыл бұрын
What cad did u use?? Kinda inspired me to make my own HB hahaha
@reesebond539
4 жыл бұрын
You should try and make one out of metal
@judeeth1285
4 жыл бұрын
I’m so excited for restock on Etsy
@Doktor_Vem
4 жыл бұрын
Do you think you could give us an ETA on the restocking of your shop? I so desperately want a pair of these, and I will do everything within my power to secure ATLEAST one of them! *ATLEAST!*
@michaelhickey9183
4 жыл бұрын
That is so bad ass
@skellybones5119
4 жыл бұрын
Big brain is actually markipier lmao😂😂😂
@adamamin4733
4 жыл бұрын
Keep up the good work man
@Aem2512
4 жыл бұрын
Where can ı get this ? Or the others ? PLS Answer this !!
@KyleofAsgard
4 жыл бұрын
Those are some mighty fine little bearings ;) hahaha
@RAWICE511
4 жыл бұрын
All because of you my friend :)
@KyleofAsgard
4 жыл бұрын
@@RAWICE511 looking forward to see your next blade ;) haha
@roykimocii5615
4 жыл бұрын
Make with hard almunium alloy
@jepsteryan3908
4 жыл бұрын
yes
@Justin-zg6ft
4 жыл бұрын
When should we expect the store to be restocked?
@blackwolf-zn7id
4 жыл бұрын
will future models have miniature springs instead of elastics bands
@marioruiz8060
4 жыл бұрын
cool video and nice work. i love your desings. thank you for your videos. High five since Spain. ERES EL PUTO AMO!!!!
@RAWICE511
4 жыл бұрын
Thankyou brother 🙏
@nicklasmeltzerjacobsen6743
4 жыл бұрын
I hope I can get my hands on one, maybe a metal one in the future! 😍
@RAWICE511
4 жыл бұрын
Yes I’d love to see this design in metal!
@nicklasmeltzerjacobsen6743
4 жыл бұрын
@@RAWICE511 really get the feel, you know! I absolutely love your work dude!
@RAWICE511
4 жыл бұрын
Nicklas Meltzer Jacobsen thanks man, people like you is what makes all the hard work worth it 🤩!
@nicklasmeltzerjacobsen6743
4 жыл бұрын
@@RAWICE511 congrats 1000 favs on Etsy! 🎉
@chronosae
4 жыл бұрын
good work man!
@jeromecabarus6893
4 жыл бұрын
my mind is having some issues understading how much information I am trying to understand how it works.
@kelvinlam6617
4 жыл бұрын
What if you replace the current blade with a metal/aluminum one?
@FlamingHawk101
4 жыл бұрын
Looks great! I’m curious though to your reason for designing the blade so that when it is sheathed, the pointy tip still points out
@RAWICE511
4 жыл бұрын
I was making it to look like the blade from AC4 which has the tip sticking out but it can be easily changed!
@MuhammadFaisal-wr4kx
4 жыл бұрын
will this be in the coming restock? or is it still too early
@RAWICE511
4 жыл бұрын
Still to early for this design, just OTF blades for now!
@denisenescu4436
4 жыл бұрын
Sorry to bother but are you gona make a tutorial how to make these at home like your hold one ? Or is literally inposible to make with out proper tools, thank you for your time in advance(sorry for the bad english :) )
@wontangonatoogie
4 жыл бұрын
Do you have a safe version of the blade
@RAWICE511
4 жыл бұрын
The ring can be worn on the thumb and that way it will only deploy if you hold the string with the rest of your fingers and pull your wrist back!
@chrisrivas6390
4 жыл бұрын
Can this be done in metal?
@Korosinu
4 жыл бұрын
Smol bearings
@frituurfet
4 жыл бұрын
When and how expensive will the new stock be?
@Justin-zg6ft
4 жыл бұрын
Anyone else notice the valhalla blade tab?
@RAWICE511
4 жыл бұрын
👀
@Justin-zg6ft
4 жыл бұрын
@@RAWICE511 I saw nothing🤐
@tauracoon4172
4 жыл бұрын
WOW you are awesome with this!!! And by the way,which software is this ?? I want to start making my projects also, thanks for the motivation you have given me :))
@jstimpy9856
4 жыл бұрын
How long have you been using Fusion?
@trippa3553
4 жыл бұрын
10:55 I think Jacksepticeye made that quote..
@outlawquill7894
4 жыл бұрын
Markiplier
@jojothermidor
4 жыл бұрын
What software did you use to design this?
@diamand8896
4 жыл бұрын
What material is it made of?
@garretrider9851
4 жыл бұрын
Is the blade metal?
@tophatdevelision5098
4 жыл бұрын
When will they be in stock again , also wver tried using a real blade
@kamvlogs4875
4 жыл бұрын
I love these vids!
@RAWICE511
4 жыл бұрын
Thanks for watching :)
@ivanpolosky1472
4 жыл бұрын
What software you are using?
@fallen6060
4 жыл бұрын
Wow, i am very early!
@1995pieter
4 жыл бұрын
I dont say this often but this is absolutely genius! this design is actually a realistic design that works and is the same as in the videogame. you did it you crazy son of a bitch, you actually did it.
@balamuralikrishna1510
4 жыл бұрын
can anyone tell me what designing software is he using ??
@lowkeylost1373
4 жыл бұрын
How much are you selling the hidden blades for???
@animeprofilepic3574
4 жыл бұрын
FUCK YES FINALLY I LOVE THIS OMG LIFE IS AWESOME AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
@haydenhenderson5512
4 жыл бұрын
Heck yeah!!
@padfoot1178
4 жыл бұрын
One day his final video will be the final model hidden blade mk42 real metal blade with locking blade and quick and quite retraction all I will say is if the military’s of the world don’t cash in on this they are fools
@niessohgaming9082
4 жыл бұрын
Do not sell it?
@tynematthews8037
4 жыл бұрын
Hi! I live in Amsterdam, how/where can I by one of your hidden blades?
@alpgiraydag2429
4 жыл бұрын
that will be legendary (you should email to ubisoft)
@RAWICE511
4 жыл бұрын
Thanks man and yes I’m hoping to do another collab with them!
@jegc1532
4 жыл бұрын
What is that program?
@shadowboyvx9593
4 жыл бұрын
Good but the noise is a little problem
@RAWICE511
4 жыл бұрын
That’s why I will put bearings in!
@shadowboyvx9593
4 жыл бұрын
@@RAWICE511 hey and if you are selling them what is the price man
@teweldeambassajir4856
4 жыл бұрын
Do you have idea of making a real steel version of this engineering project?
@RAWICE511
4 жыл бұрын
Yep sure do ;)
@teweldeambassajir4856
4 жыл бұрын
@@RAWICE511 Perfect!
@VideomasterPDB
4 жыл бұрын
how much for the STL file(s)?
@ramazamfurkancetin7387
4 жыл бұрын
where is the link
@dylonmoore1976
4 жыл бұрын
Can I buy one from you
@iwrestledajapanonce
4 жыл бұрын
So cool! Quick question: do you deliver in Europe, too? Let's say in Italy
@ChrisChen12
4 жыл бұрын
3d printable link
@javipok
4 жыл бұрын
When the gear blade is done will it be on sale? Love the vids
@RAWICE511
4 жыл бұрын
Maybe after a few more tests I will make a product model!
@Colderlarry1
4 жыл бұрын
@@RAWICE511 we are waiting for it :D
@rodriguezgualdronyesidalej7046
4 жыл бұрын
Brooo
@Coquitoofficial
4 жыл бұрын
Me regalas una??
@hellothere_24
4 жыл бұрын
AAAA
@KhaliduzzamanMredul-ei2br
4 жыл бұрын
#RAWICE511 Bro can u plz send me the 3D models. Cz it's not possible to buy it from my region😫
@ProjectNetoku
4 жыл бұрын
ah yes very handy for edgy teens and discount serial killers
Пікірлер: 156