I've been trying to decide if the godhand is truly worth it. Since I do use my hobby knives so much I think I will just upgrade to tamiya cutter! Thank you! the best review I have seen!
@PyroBits
7 жыл бұрын
Such a detailed review and comparison! I appreciate all the info and this will inform my future purchases, thank you!
@rggerry3979
7 жыл бұрын
Pyrobits glad to hear
@jameshalleluyah8133
7 жыл бұрын
I have the same GH nippers as you do in this video. They stuck together at first because you didn't remove the small piece of clear tape from the cutting edge before using it.
@rggerry3979
7 жыл бұрын
James Halleluyah didn't recall small tape on any of mine. Bought those few years ago, and pull those out from my stash as needed. Will check next time. Thanks for the tip.
@samueltan8512
5 жыл бұрын
Was thinking to upgrade to god hand...but it’s just way too expensive
@dnee
6 жыл бұрын
For me i dont cut using that method.... what i do is cut using cheaper nipper at the top of sprue part then use the god hand to clean the nubmark....using tamiya one i still need to sand some nubmark but with god hand all is smooth and not to noticeable if you dont want to sand it down
@ApriliaRSV4F
6 жыл бұрын
So if you want a smooth finish you still need to clean up with a hobby knife and sandpaper? I don't see the point in spending the extra money. I have also heard the the Godhand blades are very fragile. I do scale models, and if your surface isn't perfect, when you spray black primer you will see every imperfection.
@lsmenace4707
4 жыл бұрын
ApriliaRSV4F u kno how people are. If someone says its the best then eryone jumps on it. Like u said. If u still gotta use knife n sandpaper why spend out on a pair of expensive cutters. I like the finish u get with a knife
@Unknown-wu8jb
2 жыл бұрын
Godhand spn 120 is so much fragile, my godhand broken.
@DeathByFrenchFry
5 жыл бұрын
Perfect for Games Workshop models
@Dragonk116
6 жыл бұрын
I got the 120 5.0 nippers. Tamiya products are pretty decent but with paints and glues, not really for nippers.
@bee-beargaming
3 жыл бұрын
I'm definitely going to get the God hand.
@alislas87
5 жыл бұрын
Thank you for the video!
@bratticuss
6 жыл бұрын
I like Xuron's sprue cutters. Xuron's are designed to slice what ever they are cutting.
@hyp3rx312
3 жыл бұрын
Wow, super helpful, thanks!
@randymonster4105
Жыл бұрын
Nice review but I don't trust my hands to be accurate 100% of the time so sanding the nubs is still my be4t option. Godhand maybe nice but not for me.
@muhammadhaziqbinzulkeple2265
3 жыл бұрын
good advice. i can save some money now not buying as i always use hobby knife and sand papers a lot
@superzeronoelvalencia1361
4 жыл бұрын
I have been thinking about switching but am new to Gundam but not modeling and diorama work. I def have been wanting to get godhands as well and found them for $45 ao its def worth the investment. you should do a review on gunprimer gate removal. I have been using the raiser and they are so nice for removal. thanks again for the video.
@tedmich
4 жыл бұрын
Nice plastic nippers, much better ergonomics than nail clippers...Plastic cutting is not a demanding task, Knipex or Lindstrom should be much better on metals
@JeeL04
8 жыл бұрын
my new favorite channel
@rggerry3979
8 жыл бұрын
Thanks! !!!
@ahmadfaris8044
4 жыл бұрын
Slap "hobby" word to your pencil or eraser then you can sell you hobby pencil for 25£
@marcosems3058
8 жыл бұрын
I love your videos, my lord. greets from Brazil
@rggerry3979
8 жыл бұрын
Thanks! A good friend of mine is in Brazil
@joeypagala3305
5 жыл бұрын
God hand only have one sharp blade right? The other blade is blunt
@SHZpai
4 жыл бұрын
Joey Pagala yes on side is blunt and the other is sharp if I remember correctly u put the gate on the blunt side then cut
@vingar8632
4 жыл бұрын
I prefer godhand
@Unknown-wu8jb
2 жыл бұрын
Fragile
@tommyshiendy6778
2 жыл бұрын
@@Unknown-wu8jb Yet precise
@rviejohn
7 жыл бұрын
did they put the yen price in the packaging? like the tamiya, its 2,900 yen.
@sleepy3077
7 жыл бұрын
so which ones is better?
@LuckeeStrikee
7 жыл бұрын
God Hand, but they cost a lot more. I'd say they're fine to cut some time if you intend to paint the kit, otherwise a normal pair of nippers + a sharp hobby knife would give a better result overall.
@JeremiasSR512
7 жыл бұрын
several videos in here prove the god hands are better. Luckee Strikee's statement is real.
@lukeskytalker41
6 жыл бұрын
God hand is smooth but to smooth i still would perfer the tamiya
@steve00alt70
4 жыл бұрын
£46 for snippers? no thanks :O
@corkcamden9878
2 жыл бұрын
You need some serious practice on your illustration technique.
Пікірлер: 41