Thanks! You helped me realize I put the pieces on out of order, which is why his upper leg armor piece wouldn't fit!
@Baking_gunpla
2 жыл бұрын
Damn!!! My man just made an RG look hella way better than a lot of MG!!! Exquisite job 🔥
@Armstudiogunplaspeedbuild
2 жыл бұрын
Thank you man
@busterman8738
2 жыл бұрын
Its because real grade is more instrested into how the actual detail is compared to the real tv show. Master grade is just big and decent on the details
@andremanlulu6812
3 жыл бұрын
Nice clean build
@_ares3891
3 жыл бұрын
Gotta say.. Thats way more runners than my High grade Barbatos
@wellyfotographer8246
3 жыл бұрын
Wow
@quangminhphamang7169
3 жыл бұрын
Nice
@Armstudiogunplaspeedbuild
3 жыл бұрын
thx u
@shanewright344
Жыл бұрын
I miss the water slide decals that they used to have. I found them much easier to apply, but that's just my opinion.
@Armstudiogunplaspeedbuild
Жыл бұрын
I think both are fine unlike dry transfer decals. FYI They do give water decals on some MG and P-bandai kits.
@shanewright344
Жыл бұрын
@@Armstudiogunplaspeedbuild Is it only certain MG kits? Also, I think I remember another KZitemr mention that you can order water slide decals for the kits that don't have them, but that was a long time ago, and I'm unable to confirm who that was
@Armstudiogunplaspeedbuild
Жыл бұрын
@@shanewright344 Oh I forgot PG. It seems like Bandai give water slide decals on some MG and PG. not on RG and HG. But yes they have many sell separately. Also There are many 3rd party brands selling water slide decals. I bought them a lot as you can see on my early video.
@Xeromith
3 ай бұрын
Nice build, what was your build time?
@Armstudiogunplaspeedbuild
3 ай бұрын
2 weeks but not everyday and whole day
@jackybuzz
3 жыл бұрын
Did you get cracks when panel lining? I used Tamiya and mr.hobby panel line, both got cracks when I used them on some plastics 😢 I’m not sure if it was because the plastic was too thin? Or added too much panel ink? Or leaving it to dry for too long? Or used too much panel wash? 🤯 How can you panel line yours on different model kits and seems so smooth? 🥺
@Armstudiogunplaspeedbuild
3 жыл бұрын
Yes I have experience cracks before. The key is amount of ink. I normally tap on tissue paper then tap on the part. Also From my experience, most cracks happened when ink stuck in seam line rather than panel line. When ink stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later. I hope this will help.
@jackybuzz
3 жыл бұрын
@@Armstudiogunplaspeedbuild Thanks a lot, I beginning to understand the mechanism behind it. I do realise it happens most when ink is in seem lines, cause I do panel line after assembling it. Yes, I saw what you did for the RG perfectibility build. That’s a real good tip to panel before snapping them together! Thanks a lot!!
@froiedwardpeligrino8887
3 жыл бұрын
Very neat! Why you did not use water slide decals?
@Armstudiogunplaspeedbuild
3 жыл бұрын
Save cost man. I decided to just use clear sticker for RG.
@froiedwardpeligrino8887
3 жыл бұрын
@@Armstudiogunplaspeedbuild how do you avoid that excess ghosting around the sticker? Its very neat. It doesn't look like a sticker.
@Armstudiogunplaspeedbuild
3 жыл бұрын
@@froiedwardpeligrino8887 I think we probably cant avoid that but we can make them smoother. Here are some tricks that i always do. First, stick them on even surface, dont stick on panel line or uneven surface. If the stick is too big you can trim it. Then, use cotton brush press and rub on sticker to make sure that it complely stay flat and stick on the part. Then, apply flat topcoat. It makes sticker and plastic stay same flat tone. So, you cant clearly see the edge of sticker.
@arvinmanalese6603
2 жыл бұрын
Did you top coat the runners before assembling?
@Armstudiogunplaspeedbuild
2 жыл бұрын
I dont topcoat on running. I cut the parts off then topcoat or topcoat after assembling.
@jinwoo5182
2 жыл бұрын
may i ask what paint you used to color the clear plastics like the eyes? Also, how do you deal with joints when spraying the clear top coat matte? thanks!
@Armstudiogunplaspeedbuild
2 жыл бұрын
I use tamiya or mr.hobby clear paint. What do you worry about joints?
@jinwoo5182
2 жыл бұрын
@@Armstudiogunplaspeedbuild tamiya clear paint for the green colors on the eyes right? i am worried that if i spray the top coat on the joints, it would stiffen and be hard to move.
@Armstudiogunplaspeedbuild
2 жыл бұрын
@@jinwoo5182 Yes tamiya clear green. You can use masking tape to cover the joint that may be moved frequently.
@jinwoo5182
2 жыл бұрын
@@Armstudiogunplaspeedbuild thanks for the reply. I bought one and i havent touched it since i wasnt sure what to do lol. I wanted it to look like yours 😂
@Armstudiogunplaspeedbuild
2 жыл бұрын
@@jinwoo5182 no worries man
@krovocka
Жыл бұрын
Can someone tell me whats the story behind this gundam? Is it from a movie, or a spinoff gundam wing?
@Armstudiogunplaspeedbuild
Жыл бұрын
It only appears in novel. It is the same mobile suit with Wing Gundam tv version. just like wing proto zero and wing zero custom. They are same mobile suit but different design
@AsherKuun
2 жыл бұрын
what topcoat did you use bro mr. clear matt?
@Armstudiogunplaspeedbuild
2 жыл бұрын
I used Tamiya flat clear.
@AsherKuun
2 жыл бұрын
@@Armstudiogunplaspeedbuild thanks bro btw did you panel line fire before applying? im beginner 😅
@Armstudiogunplaspeedbuild
2 жыл бұрын
@@AsherKuun Yes, panel line before topcoat
@AsherKuun
2 жыл бұрын
@@Armstudiogunplaspeedbuild thanks ❤️
@itsrobertime
Жыл бұрын
May I ask what do you use to clean up the excess panel line accent color?
@Armstudiogunplaspeedbuild
Жыл бұрын
enamel thinner
@jbyrd2600
Жыл бұрын
at 12:19 what's the name of that beat i need it
@Armstudiogunplaspeedbuild
Жыл бұрын
I don't remember it. I tried but couldn't find it. Im sorry bro.
Пікірлер: 41