I just found a fix for the early real grade waist. My first kit was the E.G. strike freedom and it kept falling apart and it fell off my highest shelf so the wings were completely destroyed because of the waist. If you push down really hard on the waist until it clicks it will never come apart again
@angriestchezburger
2 жыл бұрын
so it's a problem with the waist joint just being hard to properly click into place
@oliverwithers9736
2 жыл бұрын
@@angriestchezburger yes essentially, it’s like how the EW kits require you to force in the leg joints until they click however it never tells you this in the instructions, I discovered it when I was having troubles with the waist and I was getting annoyed so I tried to make friction hold it by pushing really hard on the torso and then it just clicked and it’s fine.
@KuroFoxxo
Жыл бұрын
It's a good thing I found this BEFORE i started building this kit, I JUST bought it
@kyouya951
3 ай бұрын
So... That click.... Is it broken or not? Or just something "supposed" to be instructed in the manual?
@oliverwithers9736
3 ай бұрын
@@kyouya951 this comment is from 3 years ago and it’s been that long since I built a rg with the seed rg frame. From what I remember it wasn’t in the manual. I just got annoyed with my strike freedom and pressed the two halves together really hard out of anger and they clicked and then the waist was completely fine from that point on. I don’t know if it was in the manual but it probably wasn’t.
@zabuzo
3 жыл бұрын
this rg aged really well in terms of its looks; god damn does it look stunning
@eeftankian
4 жыл бұрын
I received the clear version of this lit as a new years present from my best friend
@danieldante320
4 жыл бұрын
it was P-bandai and dude,that think cost a same amount of moneyto buy a MG kits
@DZMaven
7 жыл бұрын
The Gundam is sneering at how brief it's review is. :p
@PrayogaHarryputra
7 жыл бұрын
I am missing your kind of review of Real Grade like the ones before... Your review on RG OO Riser was great, I believe it persuaded many to own it.
@MaruonYoutube
2 жыл бұрын
I've recently got the RG Build Strike Gundam as my first Gunpla I've ever owned. It was a joy to build though some parts are really small. Next time I'm going to get another Gunpla I'll see if I can find a bigger gundam I hope
@WellDoneJohn
2 жыл бұрын
How this thing is impossible to find now
@kirillkapaln4536
2 жыл бұрын
Nice. I like the RG booster.
@EnricoPallazzoooo
7 жыл бұрын
Pretty bare bone review, IMO. I know you don't have much time, but nobody (from what I can tell) pressures you to rush this videos. Do the reviews when you feel you have the time to make full reviews. Don't know how important your channel is to you, but I can see you losing subs and clicks if those half-reviews continue, and that would be a shame. Just my 2 Cents, please don't take offense to it
@shinshun6140
7 жыл бұрын
If I'm not mistaken, his subs were insanely increased when he was doing a giveaway of the RG Qan[T].
@dol_mel7487
7 жыл бұрын
Shin Shun Giveaway's typically get more subs just look at baltmatrix's chance
@quanganx5466
7 жыл бұрын
StrikeFreedomV2 I feel the same way man
@garyunwin6537
5 жыл бұрын
You sgould check out his social media, people pushes him all the time.
@lester_2020
7 жыл бұрын
RG Build Strike got two smug mouths. Nice review. Now if bandai can do the RG Universe Booster like the RG Skygrasper with Sword and Launcher Packs.
@xxnike0629xx
7 жыл бұрын
I'm sure that in terms of Build Fighter series, they plan on doing at least: - RG Universe Booster - RG Build Gundam MK2 - RG Build Strike Full Package RG System --> P-Bandai probably Then fans might get lucky and get: - RG Exia Dark Matter - RG Exia Dark Matter Trans Am - RG Exia Amazing - RG Exia Amazing Trans Am - RG Amazing Red Warrior - RG Zaku Amazing - RG Wing Fenice - RG Fenice Rinascita - RG Fenice Rinascita Alba - RG Sengoku Astray ...Basically I'm thinking about RGs that we have now they can reuse as the basis.
@rolandcabral5295
7 жыл бұрын
Come think of it, can you use the HG Universe Booster on the RG Build Strike since there's a connection for RG?
@smoldream2908
6 жыл бұрын
Roland Cabral the connection works, but the pieces that go over the chest vents don't work properly on it
@abizarrecreator4043
3 жыл бұрын
Didn't age well :(
@christopherpetts6599
3 жыл бұрын
Just finished this kit. It looks even better with full panel lining. Not having any problems with the waist but the feet really love to pop off at the ankles
@wasdwazd
7 жыл бұрын
Shortest review ever.
@nightslash3535
7 жыл бұрын
The mouth vents is probably faulty molding. Hopefully it's just an isolated case and won't occur on other copies.
@EbullientSMP
7 жыл бұрын
It's only his, unlucky for him I guess.
@kirillkapaln4536
2 жыл бұрын
looks like a sneer
@LizardMan8675309
7 жыл бұрын
Just got mine in a few days ago, I like to space it out to one section a day (like arms legs head chest) the gun was a nightmare for me the gripping hands wouldn't go together with the gun in the hand and then the peg broke so I ended up just gluing it to the rg hand thankfully I always keep the extra ones I never use so I have tons of spares so using the beam sabers shouldn't be a problem
@bluethunder5506
7 жыл бұрын
IT IS ABSOLUTELY BEYOND AWESOME!!! It is great.
@neox1052
7 жыл бұрын
i like reviews where you dont show the articulation. its just a waste of time
@shinshun6140
7 жыл бұрын
Not for action figures.
@neox1052
7 жыл бұрын
Shin Shun you got a point there. but for gunpla, its almost the same for every grade.
@warrenlam1082
7 жыл бұрын
ummm it's not the same hello?
@warrenlam1082
7 жыл бұрын
but if you look at the re/100 bawoo it doesn't have the same level of articulation
@neox1052
7 жыл бұрын
Warren Lam please read and understand little bit better. "almost the same for every grade/kit" doesnt pertain to ALL kits. Meaning, you dont have to state examples of kits which articulate differently from the usual stuff.
@Runehammer1
7 жыл бұрын
hahaha glue that shit
@koniggigih1
7 жыл бұрын
i guess i prefer short-to the point video review just like this one. for a busy person who wants to watch many videos in tight schedules, this type of video kinda relieves me. great review btw
@nova3713
4 жыл бұрын
What should I buy first?? 1.gundam wing ew 2.destiny gundam 3.sazabi
@benjamingregory5424
6 ай бұрын
Built this kit a few months ago and just realized the backpack can have other backpacks attached to it
@gerras8110
3 жыл бұрын
"Absolutely Fantastic" that's ur favorite word😆
@faithdefool2737
5 жыл бұрын
RG hell yeah. it's kind of mini master grade. i like them.
@gabrielbumanglag3303
7 жыл бұрын
I both have the MG and the HG of the kit so no rush into getting this. I guess he has no complaints of any the waist armor parts falling off (which is one of the major issues with the RG Strike) which is a good one I guess. :)
@terrysanchez5307
6 жыл бұрын
Im buying this kit tomorrow and it’ll be my first gunpla model kit
@sageerwang7993
4 жыл бұрын
Mecha Gaikotsu: It uses the old real grade strike waist joint which is a piece of shit so glue it. Me: Heck yeah. Also me: where?
@AssaultRider555
4 жыл бұрын
Just give it a lil' shake.
@jckira000
7 жыл бұрын
if no time to do a proper in depth review (like showing what can do what) then why not just film it another time?
@GuntPulp
6 жыл бұрын
It seems like verybody has negative things to say about the Build Strike, I think this could be the best looking version of the Strike, even possibly rivaling the Freedom. Imho
@kirillkapaln4536
2 жыл бұрын
2022 here admiring the thing and an RG booster!
@chairulirwansyah6087
4 жыл бұрын
what kind of stand base that this kit need? i try many but nothing fit
@_-_-936
7 жыл бұрын
Hey which recycle shop do you go to for the pbandai kits? Just a regular hardoff store?
@sstrat0s990
5 жыл бұрын
So do you top coat first then add sticker decals or do you add sticker decals then top coat ? Pls reply
@yu-jeanxiong3131
7 жыл бұрын
I really like this kit but how in the hell can you put the sword sabers on the hands? I did mines then it suddenly don't want to hold it. Especially the gun...
@mjuneoginn
6 жыл бұрын
Does the cockpit hatch open like the classic GAT-X105 Strike?! And are the HGBF Build/Star Build Strike Universe Plavsky Powergate/Galaxy Boosters COMPATIBLE with the RG Build Strike? #JustCurious...
@Slash227
5 жыл бұрын
I don't know if you found the answer already but it is not compatible. I wondered the same thing, but the connector on the mobile suit is flat retangular, and the plug of the universe booster is round, so no real grade Star build strike for us.
@rafgik
2 жыл бұрын
Could tell me how to fix RG Build Strike Gundam’s loose arms and poor footing? Because whenever I pose him with the rifle it always comes down and his feet always separate from the legs.
@alexguigui8231
2 ай бұрын
Same here ^^
@TheGreatSoundwave
6 жыл бұрын
Are the white parts on the wings stickers or seperate pieces
@rasheedgregory3459
7 жыл бұрын
After building this I've been looking at my other RG's and wondered if bandai will release any of the other build fighter gundams in RG form. RG Exia for the Exia Amazing and Dark Matter, RX-78 for the Amazing Red Warrior, Zaku II for the Zaku Amazing, Red Frame to the Sengoku Astray and im sure they can turn the Wing Zero frame to the Fenice and Fenice Renacita. Hell...I'm still waiting for the rest of the EW kits to be released. Didnt like that they hinted at them then nothin 😐 da fuk bandai.
@gudakoalter
7 жыл бұрын
is it possible to dock the sword and launcher packs in the build strike?
@RayShadow278
7 жыл бұрын
Great, now I can start looking into making my custom unit into an RG
@julianmanguiat6746
6 жыл бұрын
Is there a cockpit in the build strike full package gundam
@shironeko131
7 жыл бұрын
are the knees, ankle guards and shoulder clear pieces?
@jyuhas513
6 жыл бұрын
Hey I know this is an old video. And u may not answer this. But my son and I love building gunpla. And he is building build strike full package. He's 9. And an amazing modeler. Question is? What part of the waist should I glue to keep it from flopping apart. Thank you for any help. Pic would really help. Dont wanna glue the wrong connection. 👌👍
@ianarbie3421
5 жыл бұрын
In this rg gunpla, i found some remain part that does not belong anywhere in my build strike full package, so where those remain part unused part belong ?
@gechidnas
5 жыл бұрын
Those part are for strike gundam
@gab7506
3 жыл бұрын
I can't seem to keep the white part of the beam saber holding hands on it.
@DaSoto21500
7 жыл бұрын
What are the specifications for the markers you use to panel line?
@wolfywise
7 жыл бұрын
I'm guessing you're still building the PG Unicorn? I remember watching the unboxing and still haven't seen a review.
@rapzalsos6237
7 жыл бұрын
I'm planning to buy this along with Exia and Astray Red.
@Saufii
7 жыл бұрын
how did you attach it to mini action base?
@channel-xg9zd
7 жыл бұрын
thank you for the review I really like your videos always straight forward. I bought mine but not yet built. hehehe
@marcusgomes6011
7 жыл бұрын
Yo Mecha, Does the Universe Booster from the HG work on the RG?
@kashandi2
4 жыл бұрын
Thank you for showing the backpack guns. The promo pics neglect them.
@raffaelepassarelli6444
7 жыл бұрын
So sporadicly? 22 regular issues.... and another... 20 p-bandai/expo exclusive?
@lendotdotman
6 жыл бұрын
can you use the HG Universe Booster Plavsky Power Gate on this RG? thanks
@kylejoson8704
7 жыл бұрын
where do you exactly glue the waist?
@wotwott2319
7 жыл бұрын
use plastic cement on the top part of the waist
@vanillavanvibe
7 жыл бұрын
or use a glu tack
@jalanjalanlagi3845
5 жыл бұрын
Hi, is it have a poor waist joint?
@csbattlebot
6 жыл бұрын
Not that it's a bad kit or a bad mobile suit, but why did the Full Package, which was only in four episodes, get a real grade? Even the Build MK II got more screen time than the Full Package! Why wasn't it the Star Build Strike?! Why is Full Package more popular?! I don't get it! Someone please explain it to me!
@rolandcabral5295
7 жыл бұрын
Can the HGBC Universe Booster fit the RG Build Strike?
@jadyndenys7736
2 жыл бұрын
Pretty sure you have a knockoff considering the face plate
@billywho
7 жыл бұрын
i buy the same model and i have the same issue on the mouth part...
@ankhangnguyenphuc8224
6 жыл бұрын
Von Pixels NOT ME 😀
@bzlongshotz8021
6 жыл бұрын
This is amazing and it looks cool and I want it. This could be my first gunpla, that or the RG Exia or the Astray red frame
@bl7652
4 жыл бұрын
An RG as a first gunpla? That sounds intense
@bzlongshotz8021
8 ай бұрын
Update, my first gunpla was the full mechanics Vidar, my first RG was the Sazabi@@bl7652
@mavhunt
7 жыл бұрын
Hello! Can you please tell me which is the stand that you are using in the video to pose build strike? Thanks!
@MechaGaikotsu
7 жыл бұрын
+mavhunt I think it's the stand that comes with some of the build fighters kits. Maybe
@mavhunt
7 жыл бұрын
thanks chief!
@judeskater93
7 жыл бұрын
So should I get this or the MG model?
@gold0254102
7 жыл бұрын
Hello, i wanna ask you, which one better? this RG version, or the MG version? Sorry for bad english, thank you
@MechaGaikotsu
7 жыл бұрын
+gold0254102 I like the MG more. It's not as detailed looking on the surface, but the strike RM (the kit it uses most of the parts of) is one of my favorite master grades.
@granmastersword
7 жыл бұрын
Mecha Gaikotsu question, where do you exactly have to glue in the model's waist?
@yugen5205
7 жыл бұрын
where do you buy your gunplas?
@csbattlebot
7 жыл бұрын
There's just one thing I don't get: Why is the Build Strike Full Package more pouplar than the Star Build Strike?
@RealHageTea
Жыл бұрын
Ppl just like the OG better
@tabatski7745
4 жыл бұрын
rg system is Real grade soo yeh rg build strike's inner frame is the same as the build strike in anime
@jaythered402
7 жыл бұрын
I love your channel and reviews, but sometimes I don't feel like I get a full analysis of the kits. I think your IBO kit reviews were the most useful (probably since they were quicker builds).
@ItsME-qt6go
2 жыл бұрын
This was the shortest review of gaikotsu
@gerardray1232
7 жыл бұрын
the faceplate on my rg build strike is okay, maybe you just got unlucky. Anyway, i dont have any issues in his waist section, but rather in his left hip joint. the joint that connects the leg to the waist is too tight, so that when I try to move the leg around, the ball joint tends to pop off (because the waist-leg joint is too tight and doesnt move with the ball joint) and when I put it back together, the ball joint becomes a bit loose. it's a nightmare to pose this guy on thw ground, at least that's the case with mine. but once I put him on a stand he looks fantastic. one of the best looking RG i've ever get my hands on
@RKZQ
7 жыл бұрын
I was waiting for the articulation but you said that you have no more time left :/
@colgatesam7354
3 жыл бұрын
same . ye
@xxEmmankunnArt
4 жыл бұрын
the face vent looks like it just recovered from stroke
@nickytirtaa
7 жыл бұрын
this kit is awesome man, be patient for the mouth problem
@ExcieXC
7 жыл бұрын
Nicki Tirta seems like a QC problem from Bandai's side
@yuvan-theodumas2115
7 жыл бұрын
This is basically a detailed 1/144 scale version of the mg build strike fp right?
@xxnike0629xx
7 жыл бұрын
Well, RGs tend to basically look like a 1/144 scale version of the MG with more "realistic" details.
@yuvan-theodumas2115
7 жыл бұрын
xxnike629xx I noticed all the gimmicks are pretty much exactly the same as in the mg!
@luisrazormax2861
4 жыл бұрын
Is this gunpla still great for you?
@twilight_phantom2969
7 жыл бұрын
my only question is what's with the clear parts? I'm getting it regardless but still. weird. also I had a question. where does it tend to come apart at on the body?
@xxnike0629xx
7 жыл бұрын
I think it's suppose to represent Plavsky Particles? I suppose it makes more sense than how the HG and MG just had solid colors for those sections that are now clear blue on the RG Build Strike Full Package.
@nedinnis6752
7 жыл бұрын
xxnike629xx I personally want it to be a slight darker shade of blue like what they had with the Build Burning Gundam.
@xxnike0629xx
7 жыл бұрын
Ned Innis Well if you get this kit, then you can always paint a clear blue on top of it to darken the color. Heck why not also sprinkle some glitter and then seal it in with a clear top coat to really give it the Plavsky Particle effect? My guess is that we'll get a P-Bandai or a GunPla Expo variants of this with the "Extra Finish" later.
@twilight_phantom2969
7 жыл бұрын
I understand it's supposed to be plavsky particles but if I remember correctly it didn't have that in the show.
@xxnike0629xx
7 жыл бұрын
Wireless_Phantom Well the Real Grade line is trying to be "realistic" so sometimes, they take some liberties in regards to details.
@lionheartworld660
6 жыл бұрын
Hi mate I've left a like super cool lionheart
@TamTam24512
3 жыл бұрын
this was my first gunpla
@iceydicey77
5 жыл бұрын
Question is it a solid kit
@joshuacardenas7956
5 жыл бұрын
Who else thought that RG meant that it had the RG system
@joshuamichael2216
6 жыл бұрын
i love this so much
@ridwana4037
7 жыл бұрын
Question, can the shield connect with the rifle? You know, for anime accuracy.
@xxnike0629xx
7 жыл бұрын
Yea. I've seen reviews for this RG and it can do that.
@ridwana4037
7 жыл бұрын
Thanks
@mechalinkergaming7169
7 жыл бұрын
"Anime accuracy" This is just the Full Package, not the Star Build.
@BNuts
7 жыл бұрын
Betcha Bandai will make the RG Star Build Strike a P-Bandai kit.
@theyurireviewer
7 жыл бұрын
It's really weird to go from a V3 review to a MechaGaikotsu review Super Honorable, Humble Man to Hyperactive Master Man
@sportsrook8282
7 жыл бұрын
Oh booiiiiii, a new review!!!!!
@zephyrbean6095
4 жыл бұрын
Has anyone building this having trouble what the side skirts not staying straight
@tichy_ocean
6 жыл бұрын
Don't rush a video, just take your time.
@13_yearoldgirl3
7 жыл бұрын
Cool
@linkkicksu
6 жыл бұрын
Does the shield open up like in the show?
@aryoyudho
6 жыл бұрын
nope it didnt open up. but the detail are amazing
@kyleso831
7 жыл бұрын
How come they didn't make any try fighter MG's
@SNAKE-fk9zw
7 жыл бұрын
There's a pbandai star build strike
@shikixd4905
7 жыл бұрын
Best MG 2016?
@victor-primus9784
6 жыл бұрын
Could you review the rg strike gundam?
@tomefilho3902
7 жыл бұрын
happy new year.
@Watermelon-jt9pc
2 жыл бұрын
idk why but my build strikes feet keep falling off
@robin2thek
3 ай бұрын
Falls off on mine too!
@029_muhammaddavianrusdians4
7 жыл бұрын
idk why bandai release the full package in rg where they already have the full package in the mg for the non p bandai or seperate kits. i realy want the star bs in the rg line
@dol_mel7487
7 жыл бұрын
Muhammad Davian cause there releasing a figure in the RG line.... star build strike is probably coming later
@kurorekku
7 жыл бұрын
Build Fighters RG.... _so theres hope for a Sengoku Astray or even a Shia Quanta?!?!?_
@doritori1153
6 жыл бұрын
Why doesn't the Star Build Strike get more love?
@enoobia3146
3 жыл бұрын
which part of the waist am I supposed to glue---- OOOOOOOOOOOOOOH
I have the kit and there is the knifes from the strike
@Tmidiman
3 жыл бұрын
The feet keeps falling off on mine, as well as one of the red pieces on the backpack. So far this looks great, but it’s the worst gunpla I’ve ever had in terms of durability.
@epicskeptic3476
2 жыл бұрын
The foot on mine falls off as well but thats it for me also i love the pilot figure of sei yori as well
@Saufii
7 жыл бұрын
nice review
@JustineN
7 жыл бұрын
Wow no unboxing!
@xxnike0629xx
7 жыл бұрын
I know right? We were all waiting for the pew pew slice slice...lol
@magungnugraha5257
7 жыл бұрын
is this a p-bandai?
@gunplabuilder8
7 жыл бұрын
Shaman IO no
@gabehoehl7211
7 жыл бұрын
nope
@mechalinkergaming7169
7 жыл бұрын
Dude. Do you see the monochrome box? No. Is the number not present in the box? Then it's not a P-Bandai.
@magungnugraha5257
7 жыл бұрын
+Joeie Rivera no,the p-bandai is actually The MG Star build Strike Rg system, and I thought it was this one
Пікірлер: 209