one of the best tutorials i have watched for Rhino. Thank you very much, John!
@AxelSolares1983
7 жыл бұрын
Amazing tutorial!!! Very clear and concise. Thank you very much John.
@TheTrippleTKA
9 жыл бұрын
Holy mother load of information!! This video is amazing! A 30 min video makes my head spin. I have ADD and I kept getting distracted. But once I was able to sit through and watch you go over the feature.. phew! learned a lot! Thank you! For creating this!
@Goodnightdemons
5 жыл бұрын
THANK YOU SO MUCH! I had a project I could not figure out planar surfaces until I saw it here! Thank you!
@MrC3497943
9 жыл бұрын
Excellent tutorial. Thanks for explaining the basics in a swift and easily digestible manner.
@f612CreatorsPodcast
6 жыл бұрын
this tutorial saved my life. Learning rhino has been so annoying coming from mesh modeling thanbk you so much
@clintford75
8 жыл бұрын
Nice job, very helpful!
@chandreshsharmachans
4 жыл бұрын
This video of yours helped me a lot. Awesome work. And Thank You.
@evanc3114
5 жыл бұрын
literally what i needed thank you!
@mattiaspettersson6973
10 жыл бұрын
Thank you! Very helpful! :)
@onzkicg
2 жыл бұрын
Amazing, thanks for sharing!
@L091231
8 жыл бұрын
appreciate your work. thanks
@sebleton
9 жыл бұрын
this has helped me so much, thankyou
@shynnsup8383
9 жыл бұрын
Great video, you should do more tutorials. you are pretty good at it and at this software!
@antonschmid229
4 жыл бұрын
Super Video , helps a ton.. thank you
@VickyVyNguyen
3 жыл бұрын
Thank you!! Life saver
@wenit0
5 жыл бұрын
Amazing video!
@gertjohangous9342
4 жыл бұрын
Very informative, well done thanks
@TheAvidaEuros
10 жыл бұрын
pretty amazing video :)
@MFfuji29
6 жыл бұрын
Thank u!
@arkhiv5150
8 жыл бұрын
Thanks! !!
@mimibecks7049
4 жыл бұрын
Hi, Thank you for excellent video. I learned a lot about commands and use if shift and Alt keys and others that I did not know they existed. For me and as begiñner, you were going a bit too fast and I had to stop and repeat many times. As suggestion, if you can slow down a bit, that would be great. Otherwise, a great tutorial and I really like Rhino. I have studied AutoCad, inventor, fusion 360, solid works and now trying to shift to Rhino simply because I can buy the software instead going to see subscriptions that can add up quickly. The only thing that I did not like so far is extrude of curve using a curve. I do woodworking and typically I draw my profile perpendicular to rectangle and I extrude my profile around the rectangle and I end up with mitered joint at each corner. That is not the case in Rhino. I had to create a cutting curve and do a lot of trimming to get mitered look at each corner. Thank you Mimi
@kurilladesign
9 жыл бұрын
nice. you make any videos with organics - flowers or leaves? animals?
@cameroncooper8618
Жыл бұрын
How do you add thickness to a curve polyline? Like how would you extrude that?
@soodonim6109
2 жыл бұрын
lifesaver, thank you
@yanshin1804
5 жыл бұрын
Thanks, can rhino convert surface to solid?
@gbemisolaosinaike7454
3 жыл бұрын
how do you lift a curve off the plane in presective
@matthewlo55
8 жыл бұрын
Easyto understand the use of commands.
@new-ancient
9 жыл бұрын
How do I take a plane xy surface and control faces on the z plane with control points?
@veryetti
8 жыл бұрын
hey, want to say sorry for my english first. u should press ctrl and draw a line, which will be in the same plane until u press lmb, and than u will start to choose height
@bigbossbdf5450
8 жыл бұрын
nice
@jelenajeftenic524
9 жыл бұрын
Help please! I cant draw curve in more than one planar (in perspective view), do you know why?
@veryetti
8 жыл бұрын
hey, want to say sorry for my english first. u should press ctrl and draw a line, which will be in the same plane until u press lmb, and than u will start to choose height
@luiseduardomunhoz7886
2 жыл бұрын
I need learne more about control points in sufaces...
@odipanda5673
2 жыл бұрын
is it possible to do surface between 2 closed curve ? for example i have a square and a circle and i want to create a surface between them , edge surface doesnt allow me to make this with closed curve , and I can't find the solution :( can some1 help me ?
@lukeendo1996
10 ай бұрын
love the tutorial might want to get a mic though
@ameraanjumanjum7972
5 жыл бұрын
How to find surface area?
@pavelbartov2222
7 жыл бұрын
When you are in the Perspective view, how you draw the curve verticaly (z axis)?
@jayati.design
7 жыл бұрын
Just turn on "ortho" mode.
@GOUTAMKUMAR-vs3op
7 жыл бұрын
my ortho mode is on but the curve is but d curve is in horizontal wht i have 2 do?
@jayati.design
7 жыл бұрын
why don't you just make the curve in front view? Otherwise in perspective , if you move your cursor upwards, it automatically snaps between horizontal and vertical. Also , keep planar mode on. If you have anything else you want to ask.. just ping me on my channel.
@dgeorges6970
5 жыл бұрын
If what others suggested doesn't work for you, it could be this: discourse.mcneel.com/t/elevator-mode-on-mac/6262/3 (solved it for me)
@dutubinger
5 жыл бұрын
... hit the control button ... and KEEP it pressed then draw and see what happens ;-) it took me also a while ... but the line goes into the z direction ...
@nickhoople9248
7 жыл бұрын
hitting control does not lock my xy coordinate so that I can move into the z axis. does anybody know how to fix this????
@lorenac1234
6 жыл бұрын
did you firgure out how to do it? I am having the same problem.
@louis189201
3 жыл бұрын
Hold ctrl and click at the position you wish to move in the z axis. This can also be combined with the tab and shift functionality.
@piotrcimachowski5999
9 жыл бұрын
very nice tutorial John, but the same like Jelena I can't find out how to draw a 3D curve in perspective mode. It's makeing me creasy :) HELP and give us the answer. Best regards Piotr
@veryetti
8 жыл бұрын
hey, want to say sorry for my english first. u should press ctrl and draw a line, which will be in the same plane until u press lmb, and than u will start to choose height
@kolkataffgod2674
7 жыл бұрын
When i draw all carve in TOP view. I see only one or two carve up and down
@AnsarAli-lz4ux
6 жыл бұрын
i need total shell plate created expansion video :-)
@Deemooo
7 жыл бұрын
I believe what you call "interpret" curve is actually interpolation curve
@salehmansour1
Жыл бұрын
Patch it is. Thanks
@TheTrippleTKA
9 жыл бұрын
ok networksrf is a pain in the ass. the mac version is NOTHING like that. you just basically hit networksrt and it did it. mine is not doing anything even though I gave it three different curve! UGH!
@TheTrippleTKA
9 жыл бұрын
***** Unable to create surface. NetworkSrf requires three or more curves in each direction. so freaking done with Rhino mac. Windows look so much easier to work around
@jayati.design
7 жыл бұрын
Rhino for windows is definitely more intuitive..though I use both!
@f612CreatorsPodcast
6 жыл бұрын
wHY ISNT RHINO PAYING YOU FOR THIS TUTORIAL?> SERIOUSLY THANKS
Пікірлер: 63