Wow. True master at work. Thank you, Richard for teaching us so much.
@tazccl
11 ай бұрын
First thanks for making your videos I love watching them.
@glencrandall7051
11 ай бұрын
He is good, isn't he!🙂🙂
@tazccl
11 ай бұрын
@@glencrandall7051 Yes he is
@DiemenDesign
11 ай бұрын
Very nice. "Sounds a bit thin", I had one of those moments yesterday turning a small square edge bowl, only when I stopped to look I could see daylight through the wall. I hadn't gone through, but I could see pin holes, oh well, still practise.
@Penqueen2010
10 ай бұрын
We all live to learn, especially when it's turning timber. Richard Raffan, to me, is a generous teacher of how to do it properly.
@Hermandbl7
10 ай бұрын
I am especially impressed with how you resolved the forgotten nib on the foot and removed that MDF pad to finish the bottom. I really laughed when you were holding the bowl on the spinning lathe with only your finger! I wondered how you were going to shape the transition from the foot to the side and I really like the ogee-like shape that was the result; much better than a simple straight line. Now, talk about thin... When you were reminded how thin you had made the bowl by the sound of the wood, I really locked that TIP in my memory for my own use. Very helpful, educational and a beautiful bowl. Thank you for sharing this video.
@randyscorner9434
11 ай бұрын
This is a beautiful bowl and I can only aspire to being able to do one like it. Wonderful flowing line, very thin and elegant and exquisite detail on the foot. I learn something every time i watch one of Richard's videos.
@davidleung2432
10 ай бұрын
Only a master can turn a piece of wood into an elegy bowl that rival the delicacy of a piece of bone China! Great job!
@woodbutcherjc
10 ай бұрын
I love watching a master turner at work. I get to glean so much knowledge from your videos. Thank you much. It is appreciated.
@ianholderness5773
10 ай бұрын
Now that's more my thing, nice job. I like getting my work light and thin.😊
@jorisdemoel3821
10 ай бұрын
Much more macho than I would ever dare! That waxy sock looks like it is about to be replaced with a less waxy one. Many thanks for another instructive video.
@kenvasko2285
11 ай бұрын
I liked the end when you wiggled the camera to make it look like you were struggling. I'm onto your tricks, Richard Raffan! Nice video. Thank-you very much.
@RichardRaffanwoodturning
11 ай бұрын
If the camera moves, Ken, I am interacting with it and am struggling - and usually can't see what I'm doing so you can.
@kenvasko2285
11 ай бұрын
@@RichardRaffanwoodturning I hope everyone understands how much work it is for you to put out a video. Thanks so much. They are appreciated! Actually, that would make a good video..."What it takes to make a turning video"
@robinpoff106
10 ай бұрын
Thank you so much. You have taken my turning to an entirely new level. Great videos with so many tricks..
@joehimes9898
11 ай бұрын
Master class.
@pjseiber2774
11 ай бұрын
Definitely a Master, thank you so much for sharing your knowledge. ❤
@garyb489
10 ай бұрын
Thank you so much Mr Raffan for all of your videos and books. I have 3 plus your "The New Turning Wood" video from Taunton Press.
@anaphylaxis2548
11 ай бұрын
Beautiful. Thank you again Richard.
@Ivor_Nastyboil
11 ай бұрын
What a stunning thin bowl. Thanks for showing us that Richard.
@josephpotterf9459
11 ай бұрын
Thanks Richard that's a keeper really nice finish.
@RichardRaffanwoodturning
11 ай бұрын
In my case a seller. The good ones sell for more.
@borisfurlan9792
10 ай бұрын
So elegant, so pure form. Lucy Rie style I would say. You make me realize how much I miss the lathe work! 😢
@johnnyb95678
10 ай бұрын
Beautiful bowl. Simple lines and elegant design. Thank you for sharing your wisdom and insights in turning.
@micheleheddane3804
11 ай бұрын
I admire the way you use your fingers to judge the progress of the piece,
@kevinburrows735
10 ай бұрын
Lost for words, you’re such a perfectionist
@glencrandall7051
11 ай бұрын
I know this is a for sale item and you expect it to be used, but if I were to purchase this piece it would be for decoration only. It appears so delicate. The shape is very elegant. And a very soft finish. Very, very good. Thank you for sharing. Have a great day and stay safe.🙂🙂
@MichaelKimber
10 ай бұрын
Wonderful as always to watch you work. Thanks so much.
@cdrive5757
10 ай бұрын
Richard, the faux center was clever! 👍 I must admit I can't recall if I've ever done that when I found myself in the same predicament. The drama that ensued when the center slipped made me really appreciate the foot brake on my old lathe. Wakodahatchee Chris
@charleswatson7154
11 ай бұрын
Beautiful!
@DavidBird-uu8km
11 ай бұрын
Very nice, a beautiful bowl, so very thin.
@jackthompson5092
10 ай бұрын
Beautiful bowl Richard.
@MarklTucson
11 ай бұрын
It is always a pleasure to watch your turning techniques and designs. Really like the shape of this bowl and the thin wall is really something.
@brianhawes3115
11 ай бұрын
The way you mount the bowl on the inside is a fantastic solution to what I struggled with, so thanks for that. I was wondering if you came up with that on your own or was it something you saw another turner do?
@RichardRaffanwoodturning
11 ай бұрын
I probably developed it myself, there being very few turners around in the 1970s, but really cannot remember.
@jeffwilber8598
10 ай бұрын
Beautifully done.
@jasonmontgomery8180
11 ай бұрын
You make it look so easy!
@Tim_Pollock
10 ай бұрын
Fantastic!
@pbpleased7936
9 ай бұрын
Wow and thank you!
@bobatlawshall
10 ай бұрын
Masterclass
@Cergei-dx9ek
3 ай бұрын
Хорошая работа, подписан на Вас, стараюсь учиться по Вашим роликам
@jacquesleprince5166
10 ай бұрын
c’est vraiment dommage de n’avoir plus la traduction automatique. la compréhension fine des explications est cruciale. un geek pourrait il nous indiquer comment faire pour l’obtenir de nouveau ? Mr Raffan n’a peut être qu’un bouton à manipuler lors du dépot d’une nouvelle vidéo pour inclure la traduction ? merci aux personnes sachantes de partager. It’s a real shame that we no longer have automatic translation. a detailed understanding of the explanations is crucial. Could a geek tell us how to get it again? Perhaps Mr Raffan only has to press one button when uploading a new video to include the translation? thank you to knowledgeable people for sharing.
@RichardRaffanwoodturning
10 ай бұрын
Heureusement, vous pouvez acheter Le Tournage du Bois cela explique ce que je fais en détail www.richardraffan.com.au/books-and-dvds/
@ned711
10 ай бұрын
Richard: you seem to be finishing your pieces these days with only beeswax, and not boiled linseed oil and beeswax. I’m wondering why. Maybe you can’t get your hands on any boiled linseed oil from down under as it’s made from linseed flax, which is grown in Canada and in northern part of the US. Could it be a sock issue?
@bonitagoodwin5086
11 ай бұрын
❤ Beautiful ❤
@area50juan
11 ай бұрын
Nice job young man, you’re getting good 😜 Since you’re wearing shorts, how do you keep the shavings from getting all over your sacks and in your shoes?
@RichardRaffanwoodturning
11 ай бұрын
Sock protectors; standard Aussie equipment in summer.
@area50juan
11 ай бұрын
@@RichardRaffanwoodturning Is a pleasure to watch the years of experience and yet the excitement of a new turner. They say you start to get old the second you stop playing, and you're living proof Sr. 👋
@RonMc-k2k
11 ай бұрын
What kind of vacum shop system do you have, I may have missed an earlier video?
@RichardRaffanwoodturning
11 ай бұрын
I don't have a vacuum system. That's why I chuck bowls between centres and use jam chucks.
@RonMc-k2k
11 ай бұрын
@RichardRaffanwoodturning ,, sorry should of ask differently, I meet shop clean up vacum for dust etc?
@RichardRaffanwoodturning
11 ай бұрын
@@RonMc-k2k My apologies. The dust collector is in kzitem.info/news/bejne/1a2rrHlnZmiidWU
@malbun3275
10 ай бұрын
Hi Richard Beautiful bowl,great to watch your technique and finish. Thank you for sharing your knowledge,I’ve been turning since the late eighties,but now thanks to your videos have learnt so much ,one example is the use of the half inch spindle gouge to rough down the outside of a bowl it’s hard to believe how much faster and smoother it is to what I used to do.i ticked over 81 this year but still turn a bowl or at least something every afternoon the lathe is my happy place in this crazy world we have now. Thank you for keeping us all grounded Regards
@edwardchapman1914
11 ай бұрын
Great video, do you find much benefit going past 220 grit on a wood like ash? Thanks for the lessons.
@RichardRaffanwoodturning
11 ай бұрын
I don't find much benefit going beyond 220 grit on anything other than a few hardwoods like gidgee or African Blackwood. I want my work to be used and if it's too shiny people are reluctant to use it in case they spoil the finish.
@fredricklowe8097
11 ай бұрын
Richard which set of jaws do you use here, and which vicmarc chuck? The vm100 or vm120? I really appreciate the sharing of your knowledge like this. Best - flowe
@RichardRaffanwoodturning
11 ай бұрын
75mm Shark Jaws in a VM100 chuck.
@fredricklowe8097
9 ай бұрын
@@RichardRaffanwoodturning I must admit, my respect for you continues to grow. I was hopeful for a response, but am impressed that I got one. I don’t have the comfort you show in each video with the spindle gouge. I’d not turned since 1975 using a flootless bowl gouge as my weapon back then. I came into playing using the four sided carbides, but after too many videos from various people I went on to try to learn how to use a 5/8inch bowl gouge. I need to spend more time using the spindle gouge. I just would like to say that you are much appreciated, and your response to another post regarding cracking and drying ended up selling another bowl turning book you wrote. Kind Regards - flowe
@TheMFNelson
10 ай бұрын
What was the moisture level and how long a wait from roughing to finishing.
@RichardRaffanwoodturning
10 ай бұрын
I've no idea of the exact moisture level, but as you learn at the outset it'd been roughed about 10 mnths earlier. Claret ash is a fairly stable timber and roughed bowls typically stabalise within a year although longer seasoning is usually preferred. The moisture was probably around 12%, maybe a bit lower.
Пікірлер: 61