“Thank You” for the continuing education. Always appreciated.
@youenn2180
Жыл бұрын
Every woodturner develops his own relationship with tools , which ones to use , how to use and sharpen , even make some more appropriate , here we see perfectly new ways to use a gouge !
@jamescarter8813
Жыл бұрын
Great camera angle Richard. This is something that more turners need to understand. Showing more of what the tool does and not just the tip. You have always given great instruction, but see it helps to inform better the tools presentation.
@raydriver7300
Жыл бұрын
Another interesting free tutorial. Thank you for sharing Richard. 🌞
@stevenhansen8641
Жыл бұрын
Thanks again Richard for the time and effort.
@johnnyb95678
Жыл бұрын
Thank you so much for shifting the angle. Great video on using a spindle gouge.
@Pato290763
Жыл бұрын
Thank you very much!!! I enjoy and learn a lot from your videos and your practical and simple style of achieving the goal
@jackthompson5092
Жыл бұрын
Great lessons Richard.
@Bootes1
Жыл бұрын
Thank you Richard, that was very informative.
@jaylijoi2060
Жыл бұрын
When making a slicing finishing cut with a spindle gouge, not a scrape, what is the angle, not of the edge, but created from your waist to the rest? I can never quite see the drop down angle of the handle in the videos when you make those cuts. Thank you for all you have provided me over the years!
@randyscorner9434
Жыл бұрын
Beautiful! This is exactly the clarification I needed!
@les.6343
Жыл бұрын
Thanks Richard much appreciated.😊
@kenvasko2285
Жыл бұрын
Chapter 1 of your Master Class!
@briantaylor9266
Жыл бұрын
Excellent demo. Thanks. I'll look for a complementary demo on how to get that grind.
@RichardRaffanwoodturning
Жыл бұрын
The nearest is kzitem.info/news/bejne/ypp4k65sZl93dKg for a deep-fluted bowl gouge.
@SpunbyGreenJeans
Жыл бұрын
Great demo! Thank you!
@terrythornton1549
Жыл бұрын
That spindle gouge has seen some work. Not much life left in it, but it still does a great job.
@RichardRaffanwoodturning
Жыл бұрын
Yesterday it began a whole new life as a beading tool. There will be a short video.
@DaMidwestMan
Жыл бұрын
Hello Richard, I'm a very long time viewer of your videos and I'm enjoying all your videos on KZitem now. I think the issue of using a spindle gouge on bowls comes from the concern of using "tanged" tools on a bowl. I noticed your spindle gouge is not "tanged", it is a solid round bar into the handle. I've noticed in the USA at least, a great many spindle gouges are made with a tang, that goes into the handle. It has been mentioned a lot, to NOT use a tanged tool, when making a bowl. Perhaps you can comment on that issue in a future video. Again, I am long time lover of your videos and I love all you have accomplished with helping others learn to use the lathe. -Joe
@RichardRaffanwoodturning
Жыл бұрын
I've commented many times on this channel that it's deep-fluted spindle-roughing gouges that shouldn't go near facework. Deep-fluted spindle-roughing gouges used to be marketed simply as roughing gouges so, quite reasonably, many novice turners assumed these tools would be suitable for roughing bowls. I have shallow continental roughing gouges with long-and-strong tangs that I can use for facework as you see in kzitem.info/news/bejne/mnh-mmWgsWJmfn4.
@MikePeaceWoodturning
Жыл бұрын
Other than a SG being less expensive than a bowl gouge, I am unclear on the advantages to using a SG on a bowl. Are you getting a better cut than with a BG with the same flute size?
@MP-ou7lb
Жыл бұрын
I also am wondering why not to use a bowl gouge, a tool specified for this use case!?
@RichardRaffanwoodturning
Жыл бұрын
There are two advantages for me. The spindle gouge is less expensive than a DF gouge. It cuts as cleanly but doesn't have the strength to work more than 3-in over the rest. The other advantage is shavings never jam in the flute as they can with a DF gouge when my left hand is on the blade deflecting shavings. I used to keep a dental tool to prise them out.
@RichardRaffanwoodturning
Жыл бұрын
@@MP-ou7lb There's my response to Mike Peace. There's also some history: In 1970-71 I turned bowls using 1-in shallow gouges we'd now call continental gouges. These were army-surplus made by Sorby. I could buy five for the cost of one Sorby long and strong gouge. I was on a tight budget and turning tools scarce so that's what I used. Shortly after modern bowl gouges appeared in Britain c.1978, I was given a ½-in Vascoware gouge designed by Jerry Glaser for his friend Bob Stocksdale, the famous bowl turner. I used that shallow gouge all through the 1980s to profile bowls, so I've profiled bowls using spindle gouges for 53 years.
@knothead5
Ай бұрын
Interesting using the spindle gouge. The shavings coming off at about 3:00 block the camera's view.
@jorisdemoel3821
Жыл бұрын
A pity that first one was cracked, it looked like a nice grain. Claret Ash? Many thanks for the alternate angle to show the tool angle. Very instructive. I too hope that you will wear it down to the ferrule in good health! And at forty-seven I'm still amazed at how long you've been turning at such an incredibily high level of skill. And I've gotten nowhere near anything this level of wear on any tool! (And nowhere near the skill either)
@dagwood1327
Жыл бұрын
I like the close up views in your regular videos but I can see what you are doing to make the cut by seeing both hands.
@LewisKauffman
Жыл бұрын
Thank you.
@alanneel2749
10 ай бұрын
It seems you and Tomislav use the spindle gouge most of the time …So when do we need to use a bowl gouge??
@RichardRaffanwoodturning
10 ай бұрын
Boowl gouges are designed for strength when hollowing deep into crossgrain. A spindle gouge is okay up to 70mm over the rest, but beyond that is inclined to flex.
@alanneel2749
10 ай бұрын
@@RichardRaffanwoodturning thank you sir.
@davidshaper5146
Жыл бұрын
Are you planning on using that gouge down to the ferrule?
@RichardRaffanwoodturning
Жыл бұрын
There's a good ½-in left yet and after than it might become a detailing tool - a point with three bevels.
@davidshaper5146
Жыл бұрын
@@RichardRaffanwoodturning So, in other words, I was right. Once it becomes a point tool, you'll use it down to the ferrule.
@RichardRaffanwoodturning
Жыл бұрын
@@davidshaper5146 I think it'll see me out before I get to the ferrule.
@MikePeaceWoodturning
Жыл бұрын
@@RichardRaffanwoodturning Let's hope not!
@josephpotterf9459
Жыл бұрын
Thanks btw I have a couple of signature tools bearing your name coming tomorrow a scraper and a skew from Packard woodworks.Thnks. again
Пікірлер: 37