Have you ever wanted to see an entire tree rigged? Yes? Then have I got a video for you... Lowerable Base Anchor Vs. Aerial Rescue - • Lowerable Base Anchor ...
It was such a nice day working with you Zach. I enjoyed watching it as much as doing it! I thought our job site looked nice and tidy.
@zaccheus
4 ай бұрын
Yes, absolutely. You and Ryan put good effort into keeping things orderly down there. Definitely necessary for the a.punt of space available.
@mjb4545
4 ай бұрын
Awesome job brother. Hickories love hanging on and peeling. One trick that helps is to make some kurf cuts on the sides of your notch. This allows only the center part of the hinge to hang on hopefully preventing a peel or barber chair. Also a good practice on white pines, cedar, cottonwood, etc. Also nice call on the grcs!
@zaccheus
4 ай бұрын
Yeah, I did that on my wood cuts, I didn't think to do it on the branches. I will next time though.
@spelunkerd
4 ай бұрын
I love the way you explain rationale as you go along. For example the double half hitch method to tie the branch, on so it doesn't swing up at you as the hinge breaks.
@zaccheus
4 ай бұрын
Thank you, sir! I've honestly found it to be helpful to myself because viewers will often comment when I have something wrong or if there is a better way. It's a symbiotic relationship 😁
@ClellWise
4 ай бұрын
Zach, I never tire of hearing your explanations. Whether or not, (in your mind) it's successful. I mean come on, how would those of us true novices recognize the difference? Looked like an absolute perfect day. thanks for bringing us along. Looking forward to the "sequel".
@zaccheus
4 ай бұрын
Haha, that's mighty kind of you to share that perspective, Clell. I do get a little lost in falling short of perfection. Jon often reminds me at the end of the day that the tree is safely on the ground, and that's what the goal for the day was. I just want the things that don't go perfectly to not go to waste and to be used to their full potential as learning experiences for myself and anyone viewing.
@marymulrooney1334
9 күн бұрын
Zach, I took a ride once on a midspan Telephone Company cable. I was replacing the line to the house. I needed to use my ladder for a mid-span. I chose to connect the new phone line to the aerial bag and to the mid span just like the old wire was. I decided that I would connect the new wire on the mid span before cutting the old line off the mid span because I felt (for whatever reason at the time) that the ladder would be easier to put on the cable when it had tension on it from the connection to the house. So, after I got my new phone line connected on the mid span (the rest of the new wire was on a reel on the ground to go to the house yet) I was already belted to the cable, and my ladder was hooked over the cable and roped to the cable...I cut the old line. I knew I was in for a little ride, back and forth so I held on. Everything went as planned, but what happened was just as I cut the line and was riding the cable back and forth a Power Company truck drove by, stopped and said, "Having a good ride?" I laughed and said "I sure am." Later I thought about whether he thought I had done it by mistake since I am a female. But oh well. I hope you don't mind my old stories. I'm new to your videos so I have a lot of back ones to watch.
@havespurswillclimb
4 ай бұрын
Enjoyed the video. Very nice rigging. GRCS is a really great tool. I have enjoyed watching your progress as a climber over time. Quite the professional now.....kudos. Go to show how things come around when you want to learn and take time to absorb all the knowledge you can.....from others as well as from personal experience.
@zaccheus
4 ай бұрын
Thanks man! I've been blessed to learn a lot from yourself and others here in the comment section. I'm glad it's observable
@5chris520
4 ай бұрын
Awesome job. That was cool how you done the pin oak. I cant wait to see the bottom log being felled, to see what you have made. You make cool stuff so its untelling what we are in for.
@zaccheus
4 ай бұрын
Haha thanks man, that will be next weekend's video!
@Dred13657
4 ай бұрын
Very nice job my friend. Gotta love the way hickory holds on, but so fragile when dead
@Billster1955
4 ай бұрын
Thanks for sharing, Zach. Excellent video of a well executed removal. Blessings, brother.
@zaccheus
4 ай бұрын
Thanks, Bill!
@robertvannicolo4435
4 ай бұрын
Zach, excellent job as usual, hickory, especially shag bark, will hold on to the very last strand of wood. Especially when sap is flowing up in spring, always have a sharp, fast cutting saw. Or you end up getting called Rippy Van Winkle. I have cut wind damaged hickory and white oak that entire top folded over and only held on by a few stands of wood.
@zaccheus
4 ай бұрын
Haha, based on this experience, I can't agree more. I shpukd have .Abe switch out to the 201 to see how it compared.
@michaelnewman-ds3fr
4 ай бұрын
Thank you Zack for your videos I always learn something from you! I’ve been pretty busy lately so I don’t always get to watch but I do every chance I get! Keep up the good work!
@zaccheus
4 ай бұрын
Thanks for sharing, Michael! I know what you mean, I wasn't even able to get a video out last weekend because I've just been so busy with the season getting started.
@austinsmith3749
4 ай бұрын
Another great video man love watching you climb appreciate you explaining everything as well. Nice work! Look forward to the next one.
@zaccheus
4 ай бұрын
Thanks, Austin!
@CoolGen10
4 ай бұрын
How did you sent over to that pin oak? It looked quite far away.
@zaccheus
4 ай бұрын
Just had Jon pull me over. It was too far to jump 😅
@alotl1kevegas860
4 ай бұрын
It's a good day when Zack uploads a tree video. The ISC Ultralink is similar to the Notch Quickie, with a pulley on it. It's pretty cool. They had a recall shortly after they came out. But it's been a bit, and I'm sure they have it sorted out by now. Might be worth a look. Climb safe.
@zaccheus
4 ай бұрын
Aw, thanks, man 😊 I remember when that thing came out and I was so excited to get one and then they all got recalled. I think there was maybe a second recall after the first which made me pretty hesitant to throw $70 at it. I might still get one. Maybe if I see it on sale or on black Friday or something.
@alotl1kevegas860
4 ай бұрын
@@zaccheus I wasn't aware of the second recall. Yikes 😬.
@zaccheus
4 ай бұрын
@alotl1kevegas860 I'm not sure what it was about I heard about it from others, so it might not have been a big deal. Might have even been a result of miscommunication 😬
@alotl1kevegas860
4 ай бұрын
@@zaccheus It was just the 1 recall. It was a certain batch made at the beginning of 2023 that effected both models. I would think they're good to go if you get one now. ISC makes some pretty bomber gear. Their blocks have some of the highest mbs ratings.
@gregbrown9271
4 ай бұрын
Very nice work and your talk thru is excellent 👏 👍
@zaccheus
4 ай бұрын
Thanks Greg!
@dankotos61
4 ай бұрын
Good job man. It's nice when you can take your time and work on a tree
@zaccheus
4 ай бұрын
Thanks man. Took me awhile to figure it out, but accidents only ever happen when everyone is in a rush.
@ianbarnett6027
3 ай бұрын
Great video. Thanks.
@HYDETREEWORKS
4 ай бұрын
Shagbark is so tough. Makes the chain sound like its running through gravel
@zaccheus
4 ай бұрын
Haha it felt like it was! I'm glad they're not popular landscape trees. Ropes got stuck everywhere, groundies were constantly dodging falling bark, etc. It was nice to work a strong tree, but it was different for sure
@HYDETREEWORKS
4 ай бұрын
@@zaccheus yeah a big pain to try to pull ropes through spots with the bark the way it is
@zaccheus
4 ай бұрын
@HYDETREEWORKS absolutely!
@deadmanswife3625
4 ай бұрын
Good morning yes very nice out there this morning I got a couple hours in working in the garden. Now it's off to church well after I finish watching this video😂
@zaccheus
4 ай бұрын
Haha good morning, Wendy. It's about to be a beautiful day. I hope you have a blessed experience at church 😂
@deadmanswife3625
4 ай бұрын
@@zaccheus 🙏ty❤
@bobaverage
4 ай бұрын
Hey again Zach. I haven't used it as I took use a quickie at the moment (but I'm not too trusting of it due to others stories of issues). But there is an alternative it's the ISC Ultra Link. Incorporates a pulley too to help retrieve (although there is a video here somewhere that shows it likes to twist a bit, and without adding a biner to act as a fairlead the pulley doesn't always engage).
@zaccheus
4 ай бұрын
I have heard of it. When it was coming out I was super excited to get my hands on one. Then they got recalled and redesigned and then recalled again and that kinda killed my interested in getting one. I might still if I see it on sale somewhere. As I recalled, they're rated for life support across the minor axis.
@bobaverage
4 ай бұрын
@@zaccheus Agreed. I saw the recalls, I'm assuming it's now sorted. Looks readily available here in the UK.
@robertthompson9455
4 ай бұрын
Make a V cut and then your back cut. You can get by with a straight front cut then a back cut if the limb is fairly small and perpiedicular to the trunk...
@thetreeguy4611
4 ай бұрын
loven the oll shaggy bark
@jonkeith2624
4 ай бұрын
I have done a lot of hickory trees and I have learned that some just hang on more then overs and there no real way to tell which one will and not over then you have to pay attention to what it doing and always plan for a peel then don’t really barber chair to much more of a peel only thing I would do is make your cuts more off the trunk of the tree and make big deep notch’s
@zaccheus
4 ай бұрын
Thanks for those pointers! I did start making wider notches, under Jon's advisement, and that seemed to help a little bit. I have a bad habit of making them too narrow.
@kingofcam1137
4 ай бұрын
An alternative to the quickie is a pinto or smaller pulley with a carabiner that goes through the the alpine loop and the carabiner can also go over the climbing side which means no side loading on the carabiner bc of the pulley
@zaccheus
4 ай бұрын
I believe dmm has determined that the pintobis.notvapprovef for that set up
@kyleboman6
4 ай бұрын
You also need to make sure the slick pin is on the static side of the rope. Opposite of what you have that way movement can’t accidentally open it
@zaccheus
4 ай бұрын
That's something I haven't heard before. Thanks for sharing. I have to argue that I think that's a pretty minor detail beciase it take 700lb to shear the barbs off of the slic pin and I don't think that much force could be applied by movement is the pin is pointed the correct direction. That being said, there is no real reason to not do as you mentioned, and what can happen is not limited to my imagination, so I'll start setting it up like you mentioned.
@bioniclife
4 ай бұрын
I've heard shagbark hickory holds dirt that is blown around, in it's bark and dulls the saw. Is that something you've noticed? Hickory is one tough tree! It didn't want to give up its branches.
@zaccheus
4 ай бұрын
I haven't cut enlught to say I've experienced that. It sounds pretty plausible. I certainly wouldn't be suprised. It's also so tough that it makes any saw that was cutting spruce just fine the day before fell a little dull 😂
@bioniclife
4 ай бұрын
@@zaccheus LOL!
@josiah513
4 ай бұрын
Nice vid! Gotta love the GCRS! Makes me want one soo bad haha.
@zaccheus
4 ай бұрын
Thanks, Josiah! The GRCS is the best tool in my toolbox for sure. Definitely also the most expensive 😅
@sx-mt-fd
4 ай бұрын
Quad lock carabiner is what I use for a canopy anchor
@Sethhaun78
4 ай бұрын
😂thats great saying for guys that wont wear helmet s..ive had a few..😮a pencil dropped from high enough will hurt.lol 😂 LOL..was cutting small medium trees of barns had to pull most ofv them grown into thectin roofs .and had limb absolutely crack ne in the head . Im certain wothout my protos on would been real bad.....another while polesawing hit my ledt hand 🖐..ripped it open inside the finger. Vines let limb go..thing just healed took long time ..little ones are worst sometimes..take care
@zaccheus
4 ай бұрын
For sure! The small stuff is always the most under estimated
@hillsidetreeservice6973
4 ай бұрын
You can land any length of log flat by adjusting your knotch within reason base of the 1/5 but outside of that is doable but opening or closing the knotch
@zaccheus
4 ай бұрын
Yes, that is true. Notch angle can affect angular acceleration, but it's range of effectiveness is a lot narrower than adjusting the length of the piece. Fiber quality also plays a big part a part in things, and this hickory was outside of my experience as far as that was concerned 😅
@richardf9137
4 ай бұрын
@@zaccheusAs well as how the Groundman yanks on it!
@zaccheus
4 ай бұрын
@richardf9137 Haha, that is an excellent point, too! That's a variable thats really hard to keep consistent and account for.
@Kevin.L_
4 ай бұрын
Good job. I like the way you work.
@zaccheus
4 ай бұрын
Thanks Kevin!
@GoLongboardBroseph
4 ай бұрын
Well done man, that grcs sure saves in some situations ;)
@zaccheus
4 ай бұрын
Thanks, man! It really does save some time. It's rare that it's the only solution to a problem, but it's quite common that it's the fastest solution to a problem.
@toddjacks8288
4 ай бұрын
Awesome job brother
@zaccheus
4 ай бұрын
Thanks Todd!
@kyleboman6
4 ай бұрын
Use kerf cuts on the sides below your face cut and it will break fine
@TylerKegolis
3 ай бұрын
Kerf cuts save lives brother! Be safe!
@zaccheus
3 ай бұрын
Haha, no worries, I made them where they were important. Just not on all the limbs, though it might have given me a better experience to do so.
@TylerKegolis
3 ай бұрын
@@zaccheus where are you located? We have a decent bit to shag bark hickory here in PA. And a ton of locust where I am at.
@zaccheus
3 ай бұрын
@@TylerKegolis Canton, Ohio. Probably not too far away
@HansvanOostende
3 ай бұрын
Perfect Job
@zaccheus
3 ай бұрын
Thanks Hans!
@loganshamblin4935
4 ай бұрын
There is a piece of kit from ISC called the ultralink that functions very similar to the quickie. Give it a try.
@zaccheus
4 ай бұрын
I was super excited when it came out, but then the recalls kinda killed my excitement. I might pick one up if I ever see them on sale. I really like that that are rated fir life support across the minor axis.
@JLMTreeService
4 ай бұрын
Great video!! Ahhhh good ol hickory... There is no way to stop the peel ... Kurf cuts and it'll still do it sometimes🤣🤣 Great job on rigging the whole tree, we just posted a similar job on our channel on yesterday!! Find your self bored bro, come check it out!!
@zaccheus
4 ай бұрын
I should have tried some side cuts on the limbs, I just didn't think of it while I was up there 🤦♂️I did it on the wood, but even those hinges held on more than I wanted 😅 I'll have to check it out!
@michaelwhiteoldtimer7648
4 ай бұрын
Great job
@zaccheus
4 ай бұрын
Thanks Michael!
@Sethhaun78
4 ай бұрын
I love shaggy barks
@timtrapp1324
4 ай бұрын
As for the quickie use as a canopy anchor. Is using a triple locking carabiner unacceptable in its place? That's what I use and I'm open to feedback on it (I assume you have a reason for not using one)
@zaccheus
4 ай бұрын
Great question. It is an inappropriate use of a carabiner as per every manufacturer out there. They all say it's not okay because it side loads the spine and gate and can cause a failure below the load rating. Petzl says you can do it on large limbs where the larger diameter prevents the biner from being side loaded, but canopy anchors are never on large limbs 🤷♂️ I think the chances of failure are fairly low, but they are probably higher than using a quickie or if you want to be even safer, feeding the tail of the rope through the butterfly knot.
@JLyons314
4 ай бұрын
I'll use a sling and carabiner for redirects all the time, but stick to the quickie for the main anchor. I never liked the idea of losing sight of the carabiner, and it potentially (however also unlikely) shifting and loading the gate.
@Sethhaun78
4 ай бұрын
God bless
@Sethhaun78
4 ай бұрын
Out of all the hickory s I removed last couple years ,,,I've never had a shaggy bark.. 🤪
@Sethhaun78
4 ай бұрын
Beautiful tree ..have Custamer woth a dozen or so in her yard ..it's veery large like 12 acres.i mow the property..took down several big trees about 15 but never got one of those shaggy barks..they drop nuts everywhere..absolutely destroys my blades on zero turn..s
@zaccheus
4 ай бұрын
They are really cool trees, but I can definitely see why they're not popular lawn trees 😅
@Sethhaun78
3 ай бұрын
@@zaccheusthey are the worst on the mowers ..I mow as well and comercial..tge nuts and limbs will dull blades and destroy spindle s belts ..just fixes my bobcat mower..from hickory,,oddly enough I'm sick and customers had one fall in the storm .but can't do it right now .gett8ng Dr, visits tests
@zaccheus
3 ай бұрын
@Sethhaun78 I've been praying for you man, let me know how that turns out.
@Sethhaun78
3 ай бұрын
@@zaccheus thank you God bless you ..waiting on results. But nit healing..can barley work couple hours..quite terrified..
@Sethhaun78
4 ай бұрын
I know you like to get to proper bend radius..you can put a ring 💍..next to the block..especially since your negative rigging
@zaccheus
4 ай бұрын
Mmm I'm not sure I understand the benefits there. Rings have tighter bend radii yet.
@wvboy0311
4 ай бұрын
Those hickorys are usaully a pain because of the bark when trying to flip line up the tree
@zaccheus
4 ай бұрын
Yeah, I struggled with the flip line and the ropes getting caught all day 🙄
@Sethhaun78
3 ай бұрын
What do you hook your big saw to
@zaccheus
3 ай бұрын
I use a big shembiner on my belt. The tether on the saw is a monkey beaver piece that someone at the monkey beaver booth gave me at the TCIA show. The side handle on the 500 sits nicely in that shembiner. It can be awkward if there are things around to catch the bar on, but otherwise I like to hang it that way so it's not as far to lift wverytime I take it off my belt
@Sethhaun78
3 ай бұрын
Hickory holds on..always ..gotta cut threw em
@zaccheus
3 ай бұрын
You know, thays what I thought by the end of this. But the video I release most recently was another shagbark on the same property and it broke much easier. I'm not really sure what the different was.
@Sethhaun78
3 ай бұрын
Stronger tree..Kevin ham does video about this topic .on s solo removal.job out by a lake..in my experience hickory won't let go.gotta keep saw going all way threw as much as u can..one little fiber depending on season and health of it will hold entire tree tops ..customer has a huge one that fell in feild and the trunk by stum looks incredible the fiber tear from the wind storm is testimonial to power of GOD. It looks like it was chipped then put back together half-way. 3ft bar size spar about 25ft ..however the top left side had Carpenter ants as suspected from previous trees I removed off this old farm land ..the cherry s and silver maples had them..to...very old trees..they has not yet ate therr way to the stump yet bevause of hickory being so hard ..but on the cherries maples they had gotten down to the stump..in winter Carpenter ants go down in the stump base underground..we also have the cicadas back in some areas this year millions of them...the buzzing of saws or equipment they swarm you ..harmlessmostly but very very distracting as they are huge...landing on your head area flipps me out ..we had them real bad few years ago they sat every 17 years or something like that..strange..had ultra sounds ,scans today still haven't gotten better praying 🙏
@hankjordan2602
4 ай бұрын
I would have like to see you swing over there. The video doesn’t show justice it looks like a long was.
@zaccheus
4 ай бұрын
Ah, it wasn't anything spectacular, I just had Jon pull me over 😅
@marymulrooney1334
9 күн бұрын
From the ground, the limbs didn't look as big as they were.
@br-dj2ti
4 ай бұрын
Hey buddy great job as always love seeing you post I hope all is well the block that you used in this video is it only made for 3/4 rope or can you use other ropes as well if so please can you tell me what other sizes thank you God bless
@zaccheus
4 ай бұрын
It is the ISC RP057. It is specifically made for 3/4" rope and a 1 1/8" sling. It's rated for way more than I'll ever need to rig, but I like it because of the sheave diameter. Technically, using smaller diameter ropes in bigger blocks mean that the groove in the sheave won't craddle and support the rope the way its supposed to. I do use 5/8" rope in it and a 3/4 sling. Maybe that's wrong 🤷♂️😬 I really hope not 😅 I think the bend radius is worth it. If your considering a purchase, I would advise handling one at a show or something as it is surprisingly heavy.
@br-dj2ti
4 ай бұрын
@@zaccheus I did order the block I did get it in last week I was surprised at how big it was
@zaccheus
4 ай бұрын
@br-dj2ti Thats great! Some guys I've worked with call it "the traffic cone" because it's so big 😅
@br-dj2ti
4 ай бұрын
@@zaccheus I know buddy I open the box up I was like oh my goodness LOL
@zaccheus
4 ай бұрын
@@br-dj2ti lol, that's great. One thing is for sure, you'll never break it. Never. 😂
@MrEvanb93
4 ай бұрын
i like my husky battery saw but when it comes to hickory, and oak im taking my gas saw to shredville
@zaccheus
4 ай бұрын
Haha fair enough. This little Milwaukee is built different. But the slower chainspeed does make it a different animal. Its an animal in wood though.
@nicolaisvlog8701
4 ай бұрын
u happy im happy
@pekerja27
4 ай бұрын
😮 sangat berani dan kuat
@zaccheus
4 ай бұрын
Thanks!
@harmsfamily420
4 ай бұрын
Always cut the sapwood and it’ll be just fine
@zaccheus
4 ай бұрын
That would have helped some of those limbs for sure. I'm not well accustomed to needing that on limbs too much and so I didn't think do it. I should have. Thank you for sharing
@chirla_j
4 ай бұрын
Have you ever tried incorporating a Texas tug with your canopy anchor setup? It's a nice added insurance just in case something were to go wrong with the quicky. It does also help with retrieval on some of those rough bark trees, or multiple redirects. Here is a link for an example: kzitem.info/news/bejne/p4SNu2innn6crWk
@zaccheus
4 ай бұрын
Yes, I'm familiar with it. The inventor, Chris Coates, showed me himself. Its great for trim climbs and such. Bino there still uses a quickie, but the sweet thing about the TT is that you can use it with just the climbing end of the rope fed through the anchoring butterfly, which would technically be safer than using any hardware in the anchor. I would not use it on a removal. Thanks for sharing that idea here!
@chirla_j
4 ай бұрын
@@zaccheus Np brother. Always looking forward to your uploads! Stay safe, cheers!
@Sethhaun78
4 ай бұрын
Nice work...just use delta link boss..
@zaccheus
4 ай бұрын
The screw gate style? I think they have to be wrench tightened to be acceptable for lift support. I don't really wanna carry a wrench. That is something I neglected to mention as a comparable piece to the quickie. Thanks for sharing the thought!
@Sethhaun78
4 ай бұрын
@@zaccheus Patrick brandit.uses them all the time..he doesent use spikes.but is a climber does cat rescue and I believe was the first along with mumford to test the rope wrench on the zigzag he uses delta links you don't need wrench..
@Sethhaun78
4 ай бұрын
@@zaccheus I may have miss spelled last name..but he's longtime in the climb industry..I learned about the links from his videos..he uses them on spar s climbing without spurs.useing links and straps for foot holds..quite interesting
@Sethhaun78
4 ай бұрын
@@zaccheus being honest rather have something screws than those pins ..I bought some delta links big and small..bevause after trying the quickie for me it's hard to open and don't realy trust pins ..becreal difficult for link to unscrew has many threads ..stay safe
@zaccheus
4 ай бұрын
@Sethhaun78 That's mighty cool. Spikless climbing definitely requires more creativity than spike climbing. I can totally see using delta links for non life support applications, thats makes plenty of sense. I don't love the quickie myself. I was really hoping the ultra link would turn out to be something better than it did. I don't want to have my life supported by a finger tight screw gate just like I wouldn't want to drive a car with finger tight bolts hold the brakes on.
@thetreeguy4611
4 ай бұрын
you need to try the husky t536i , I have that from 2014 still going strong on org batteries , I have the newer T540i also but reach for the 536 more often
@zaccheus
4 ай бұрын
I think I've ran them both, maybe. It was awhile ago, so I'm not sure. Why do you like the 536 more?
@thetreeguy4611
4 ай бұрын
@@zaccheus I'm not sure yet as I said I've had the battery t536 since 2014 maybe even a little earlier, the 540 seems like it has a slightly slower chain speed in the high mode, but it is considered rated, it might be that I've run the t536 so long that I'm comfortable with it
@thetreeguy4611
4 ай бұрын
Also if you're into electric saws (not everybody is) the echo DCS 5000 18 INCH is a good contender also, give my 35 / 40 CC saws a run for their money
@zaccheus
4 ай бұрын
@@thetreeguy4611 I gotcha, that makes sense
@zaccheus
4 ай бұрын
@thetreeguy4611 I think they have their place. I haven't climbed with my 201 since I got this milwaukee. I have the DCS2500 here in box to do some comparison stuff with. Mayne after than I'll do the 5000. Do you think it would compare to the MSA300?
@small-town-southern-man3573
4 ай бұрын
After trying rigging rings, I seldom pull the block out any more.
@zaccheus
4 ай бұрын
I know some folks love them, and I see why. They add a little more risk to the system than I prefer to tolerate. The certainly work, it's just that 1 time out of a million that I don't want to experience. That being said, I still use them for low load applications and double blocking.
@small-town-southern-man3573
4 ай бұрын
@@zaccheus What risk are you referring to? I’ve rigged out 750#-800# chunks on them. The only downside I see is reduced rope life, but when rigging heavy wood, a rope needs to be cycled out more frequently anyway.
@zaccheus
4 ай бұрын
@small-town-southern-man3573 just bend radius and unmonitored heat development. I'm not advocating that nobody should use them. I just prefer a block and the amount of extra effort is minimal for me.
@small-town-southern-man3573
4 ай бұрын
@@zaccheus Gotcha. Having blocked down many a trunk over the last 38 years, the ease of moving/repositioning a Bend Right ring on an ultra sling down after each cut shines brightly over moving a big block! 😁 I enjoy your videos! Keep it up!
@zaccheus
4 ай бұрын
@small-town-southern-man3573 For sure, the bend rite ring definitely has a better radius too. I think it's 4:1 for everything up to 9/16 as I recall. And if you're moving it constantly, you can keep a eye on how hot it gets.
@TheToolnut
Сағат бұрын
Outstanding Sir, your climbing and rigging style is quite similar to my own. The main difference is your mainly S.R.S and I'm mostly M.R.S, 👍💪🪓🌲🇺🇸🇮🇪🇮🇪
Пікірлер: 149