Very clever design. Mounting the diodes to a header is a fantastic idea.
@DivKid
6 жыл бұрын
Yeah nice to be able to swap those
@nectariosm
5 жыл бұрын
My face melted. Love the tuned feedback and the CV on this.
@DivKid
5 жыл бұрын
nice! :)
@userfriendlysounds
6 жыл бұрын
At first glance to me, this seems like a module that one might acquire, almost begrudgingly, because it sounds SO good... but then over time realize that it is not exactly the “one trick pony” you originally thought. Then all of a sudden you realize that it is going to be in your case forever.
@DivKid
6 жыл бұрын
Quite possibly the case with this thing. I've been running signals through it with the lowest gain and just getting a nice 'bump' over the whole thing.
@BrunoWiebelt
6 жыл бұрын
its a sweat bone mill , fantastic clean and warm ... you such great sound engenier/artist ...your moments are outstanding in the scene
@DivKid
6 жыл бұрын
sweat bone mill?
@BrunoWiebelt
6 жыл бұрын
a good sound manglar
@BrunoWiebelt
6 жыл бұрын
sometimes I invent words
@filthXpig
6 жыл бұрын
Like "engenier"?
@wombra8314
6 жыл бұрын
cheers div, great extensive demo with loads of creative applications. 'kin gnarlysmooth shredder! so lovely 🎛🤤🐛
@DivKid
6 жыл бұрын
:) cheers
@slipknotboy555
6 жыл бұрын
Turning up the gain on those drums sounded pretty good. The waveshaping type stuff was cool, too
@DivKid
6 жыл бұрын
nice one.
@pulp61
5 жыл бұрын
You really sold me on this one. The sound quality of the Miasma is just incredible, it somehow managed to beat out having actual lightning in my rack (i.e. Plasma Drive), though admittedly that was a tough call.
@_skysick_
4 жыл бұрын
you 100% made the right call. I've got a plasma drive and I'm pretty underwhelmed. The tonal character is inflexible and not very musical.
@strangemobius
6 жыл бұрын
Damn you Divkid, here's another one I have to go order now... I love the switchable diodes!! This really appeals to the studio engineer side of my workflow where if you can crush it and blend it back in parallel... you should.
@DivKid
6 жыл бұрын
Yeah I think that ticks an itch in the brain for a lot of people.
@somnambulantable
5 жыл бұрын
Can't wait for the Altar video, too!
@DivKid
5 жыл бұрын
:) me too
@andrewcampbell8938
6 жыл бұрын
When I'm bored I feed the audio from your videos into Clouds and create epic soundscapes. Hope you don't mind.
@DivKid
6 жыл бұрын
Don't mind at all! Tag me anything if you post anything with it.
@DanielBeaulieu
4 жыл бұрын
Just ordered one of these for my drum rig. Sounds great.
@uplinkstudio
6 жыл бұрын
another great video, I might have to get one of these
@DivKid
6 жыл бұрын
Cheers Doug, appreciate that.
@5ToK3
6 жыл бұрын
another terrific review! that thing kicks fekkin arris
@DivKid
6 жыл бұрын
nice one!
@mattonymous
6 жыл бұрын
Monsta module really like the ability to root the feedback =)
@DivKid
6 жыл бұрын
Yeah encourage some experimenting and exploration.
@lbauerer
5 жыл бұрын
suitably gnarly indeed
@kaiserclicker8479
5 жыл бұрын
wow great disto!
@DivKid
5 жыл бұрын
absolutely.
@kaiserclicker8479
5 жыл бұрын
is it worth it to get one if you already have an ufold (intellijel)?
@DivKid
5 жыл бұрын
it's a very different sound and effect to the uFold. But you could use either one in place of distortion/warping etc. It depends ... do you need another shaping/distorting like module?
@kaiserclicker8479
5 жыл бұрын
yeah i love use this :)
@DivKid
5 жыл бұрын
:)
@CablesForClouds
6 жыл бұрын
Might have to get one of these...was thinking the meth amp but this sounds too sweet! Nice review as always 😉
@DivKid
6 жыл бұрын
Nice one! :)
@benthomaswelch
6 жыл бұрын
This thing sounds really good. I'm curious how you do your side chain around 4 min.
@DivKid
6 жыл бұрын
I've made a track, new video to celebrate 303 followers and a patch breakdown for everyone on Patreon so you'll get to see that :) But ... I'm taking the sound into a VCA, triggering an ADSR with the same trigger as the bass drum taking the envelope into a attenuverter/offset utility and adding enough offset to fully open the VCA then inverting the envelope to pull the signal down when the kick hits. That then goes into the VCA CV in.
@motorhead412
6 жыл бұрын
dammit, now i need this. arrgh!
@DivKid
6 жыл бұрын
it'll make your sounds go arrrghhh too :)
@ScottofOakland
5 жыл бұрын
This thing would be SICK in a Doom music context ala Sunn 0)))
@DivKid
5 жыл бұрын
YES Sunn!
@ScottofOakland
5 жыл бұрын
@@DivKidThe Filter into the Feedback loop has SOLD the module for me. Totally awesome
@DivKid
5 жыл бұрын
:) nice
@MatthewPherigo
6 жыл бұрын
I wonder what kind of circuit this is? I'd love this in a pedal format.
@DivKid
6 жыл бұрын
You can see in the video I'm swapping out components it's diode rectification in vary forms I believe.
@kahly56
6 жыл бұрын
I have heard is working actualy on a pedal version
@fakshen1973
6 жыл бұрын
I like the sounds. But if you're going to offer me the ability to swap out components, let me do it at the front panel. Pulling the module, putting in a new discrete component, putting the module back in... firing everything back up... it's just not a lot of fun. If you made it so the feedback knob was smaller and there was a hole in front panel and a way to SAFELY replace the diodes etc while still being powered... that would be smashing. A pop out plastic plate with a switch that disconnects the circuit would make this brilliant. It's good. But this kind of functionality would be so much better if I'm trying to find a sound and experimenting a bit.
@DivKid
6 жыл бұрын
I get that. However I've been pulling mine out with power still plugged in and swapping components with no issue. It's more a set and forget thing for me but of course it would be easier on the front panel.
@somnambulantable
5 жыл бұрын
There's also an expander that lets you select the various diodes called Crime.
@zorglub76
6 жыл бұрын
Hey, wait, I've come here for the Miasma, the smd version of Befaco Rampage! :)
@DivKid
6 жыл бұрын
Ah cool, videos of the Rampage on my channel too.
@sebdaflou706
5 жыл бұрын
Hi Divkid ! could you tell me wich diode you are using at 15:00 of your vidéo and also the patch ? thanx a lot !
@DivKid
5 жыл бұрын
both red LEDs.
@No.0.o.0
3 жыл бұрын
Reminds me of the Zvex Fuzz Factory
@supportsquid
5 жыл бұрын
For your first 303-like example, what are you using? Are those the dinsync 303 modules? What sequencer?
@marcokorda8725
2 жыл бұрын
Nice Video, thx a lot. Which low pass gate do you use? Thx in advance
@thezyg6311
5 жыл бұрын
No way to mount the different components on a board and have a switch between them?
@DivKid
5 жыл бұрын
there's a new expander coming for that.
@jakegraves5977
2 жыл бұрын
Love the demo. What my module did you use to create the 303 sound?
@DivKid
2 жыл бұрын
Hi Jake, I can't remember the whole patch but the filter was the Mutable Instruments Ripples. The filter and Miasma are the two doing the heavy lifting here.
@faesirois869
4 жыл бұрын
The filter in the 303 example is altar? Or something else?
@woodlandcritterpunch
6 жыл бұрын
I was just about to finally get around to getting an Alisa Waveshaper and then you go and drop this. Why oh why do you gotta make me choose, Ben? :(
@DivKid
6 жыл бұрын
lots of great waveshapers around at the minute. They're the new filters! :)
@cylonik
3 жыл бұрын
This vs 100 grit?
@marcuslonebrink
3 жыл бұрын
I reeeeeally wonder what this monstrosity would sound like if it was feedback patched into itself with 0chd fiddling the parameters
Пікірлер: 73