Looks spot on mate! Gutted about the motor shaft!! As could have been used in something else. I just put a max 8 in my maxx v2 it a total monster 👹 now
@rccrazy
Жыл бұрын
Sweet man, much better with the HW system🤘 Definitely looks like thicker centre diff oil will help and maybe in the front diff aswell, it looked like it was loosing the rear (spinning out) a bit but could be other reasons. Good little test man👌
@zingzing_media
Жыл бұрын
That set up looks sick pal 👍👍 great lil rip there bro
@bluewolfrc
Жыл бұрын
Its great so far :D hopefully going tomorrow for a proper bash 😁
@t3floz
16 күн бұрын
Great video! Did you have you have to use full throttle when backflipping? Have you used 4s on it?
@jonathanmc-smith7284
Жыл бұрын
Cool video buddy 👍 it looks great popping wheelies . Is it more fun now 🤔🤔👍👍👍
@bluewolfrc
Жыл бұрын
I only had 2 priper runs before it broke but it has a lot more power now 😁
@RuisRcAdventures
Жыл бұрын
My Proline Trenchers also balloon a bit and that's with the stock system! Lol. Yours is sounding sweet now man, them shocks might need a bit of tuning you reckon? Looked a little soft but great run nevertheless 👌👍
@bluewolfrc
Жыл бұрын
Yeah man need to tighten them up a bit but i did loosten them all the way before the run
@RuisRcAdventures
Жыл бұрын
@@bluewolfrc yeah man thats cool. I got Rpm roof skids fitted on mine but the rest of the shell is getting quick knackered, got a new one arriving today so i'm gonna gorilla tape the hell out of it lol
@bluewolfrc
Жыл бұрын
Im just gunna beat the hell out of this one then try to find a new one in the style of an old square body truck thatll fit 😁
@RuisRcAdventures
Жыл бұрын
@@bluewolfrc coolio! 👍
@peteralbury7724
5 ай бұрын
WOW
@RCRoads
Жыл бұрын
Nice run and back flips with the MT10. I seem to have better luck flipping and landing the Arrma Granite than the MT10. Did you notice a big difference in performance over the stock 3300kv Reedy system?
@bluewolfrc
Жыл бұрын
Not sure if i mentioned in the video but im running 2 teeth more on the pinion, its got a bit more top speed, a lot more punch and i could run 4s now if i wanted! Better, slightly, on 3s, but the throttle feel and punch is so much better, and everything runs much cooler as it was designed to run 3s
@chrisvda7277
7 ай бұрын
Just got the same setup in mine. Not run it yet. Did you ever do a speed run with this setup to find the top speed. I with for a 15t pinion aswell lol.
@bluewolfrc
5 ай бұрын
Ive not actually checked honestly, i recon its about 40mph but i could check if you want
@alankowalski8781
9 ай бұрын
Over in US, I can’t seem to find a metal spur for the thing. Any metal spurs for the MT10 over your way?
@noahblum2583
5 ай бұрын
You can modify a metal Traxxas slash 4x4 gear pn. Tra3956x… you can see what needs to be cut off when you have them side by side. It’s an easy 5 minutes with a cut off wheel. and then you use associated pn. 9832 bearing instead of the one on your plastic spur. It’s the same 54 tooth. ✌️
@advancedwallstructures1756
5 ай бұрын
Been trying to find a metal spur solution, thanks a ton for the traxxas part number!
@seanwilson9117
Жыл бұрын
Was it fairly painless in terms of the install?
@bluewolfrc
Жыл бұрын
Yeah it was easy enough :) only 1 screw to loosten the motor plate, swapped motors, and just stuck the new esc whwre the old one was with double sided tape
@seanwilson9117
Жыл бұрын
@@bluewolfrc Nice. I came from the cheap side of the hobby and changing out HBX motors was super easy, WLToys was a living nightmare due to having to snap the motor mount to remove the old one and then I've just not had a great time working on Arrma's 3s line so far but that's mostly due to a nightmare time changing out servos on the Senton because who wouldn't love having to line up three different small holes in the chassis precariously balancing a screw on the tip of my hex driver praying it doesn't fall off before I get to the hole for the 85th consecutive time.
@Skipperste
Жыл бұрын
What spur and pinion did you go for
@bluewolfrc
Жыл бұрын
Stock spur, 15t pinion, good punch, more speed and the system doesnt overheat with the cooling fans even with the bec only at 6v and a 30 min run
Пікірлер: 28