What a lovely, elegant knot for a common requirement! Can’t wait to try that out myself - thanks for sharing
@blitzkriegspearfishing
3 жыл бұрын
Please keep making these tutorials Rob, its helping me alot!
@timothyhutchins4668
3 жыл бұрын
Thanks Rob. I just recently lost my speargun because it pulled off the longline clip exactly how you showed. I will use the piece of rubber bungee to prevent this. Great tip!!
@ISMACGREYSUB
4 жыл бұрын
Very nice knot Rob.Cheers mate!
@georgechatziiliadis5234
4 жыл бұрын
You are amazing Rob.. Nice & practical knot. Thank you so much !
@outerskirtshiking8141
3 жыл бұрын
After learning the constrictor knot for a diy spear sling, I have a new interest in knots, hah. Thanks for the video
@notyouraveragearborist1135
4 жыл бұрын
Love these videos rob, experience like yours is hard to come by and these videos do a great job of getting that experience out to everybody else🤙🏻🤙🏻
@olliecraig-primalpursuit
4 жыл бұрын
Cheers Rob! Great instructional video once again!
@jadellazkani5290
3 жыл бұрын
Thank you Rob Allen used it to connect a clip on a float took me 25 tries. It looks neat
@josephdestefano7377
2 жыл бұрын
Your the BEST THANKS SO MUCH !!!!!!!
@Jacedives
4 жыл бұрын
Easy as. Thanks Rob!
@7madZz
4 жыл бұрын
Thanks Rob
@isaacmzt5232
Жыл бұрын
This knot is a Uni knot cousin
@73-3
4 жыл бұрын
спасибо,полезно
@vlademarcepeshmanovich8322
4 жыл бұрын
👌🏻👌🏻👌🏻
@kvtpower956
4 жыл бұрын
👌👌👌👌
@Pan-48-Head
Жыл бұрын
What size is that blue bungee rubber used on the clip
@RobAllenSpearfishing
Жыл бұрын
Our bungee rubber in 10mm OD with a 4mm ID. You can use an old 14mm speargun rubber, just cut it a little shorter.
@ioijiopjkiopjkp
4 жыл бұрын
This is a quadruple fishermans knot
@martincjoergensen
4 жыл бұрын
Idea for a video: Rob Allen How To - Bands for roller guns
@RobAllenSpearfishing
4 жыл бұрын
A few are asking for this. I will do that next. If all goes well it will be up Friday.
@martincjoergensen
4 жыл бұрын
@@RobAllenSpearfishing Perfect, thanks. A lot of us don't use beeds just knots inside the rubbers, so if you can show it both ways it would be awesome.
@chrissfak
3 жыл бұрын
Hi Rob, how can I remove a shark clip from the butt of a gun in case I do not want to use it? I tried un-screwing the screws from left/right part pf the handle but they got worn out. And a second question: I own a Sparid, but changed the shaft to 7.5mm and added a second 16mm band. Is there any other structural difference between a Tuna and a Sparid apart from the band/shaft setup? Thanks in advance!
@roballen1578
3 жыл бұрын
Hi Christos, in order to take off the longline shark clip, unscrew both screws on the right side cheek plate. The left side are imitation. Once both right side screws are out, the 2 cheek plates can be removed and the clip will drop out. Then simply replace the 2 cheek plates. Re the Sparid, all the components are the same, no problem upgrading it to a Tuna.
@chrissfak
3 жыл бұрын
@@roballen1578 Thank you!
@ottotass3059
2 жыл бұрын
@@roballen1578 really glad I looked at the other comments, I had the same exact same two questions:-D
@dieli9499
4 жыл бұрын
Hi rob,just question, i am buying rob allen scorpia close muzzle and i want to upgrade/change it to open muzzle double rubber,any howto on that one? Thanks
@RobAllenSpearfishing
4 жыл бұрын
You buying just the muzzle or the whole Scorpia gun? If the whole gun, easy to change out the muzzle but, be careful not to overload the barrel. The new Scorpia barrels are made lighter so designed for only one rubber. You can use 2 x 14mm rubbers if the gun is not too long.
@dieli9499
4 жыл бұрын
@@RobAllenSpearfishing i am buying the whole speargun spearfishing.com.au/collections/spearguns/products/rob-allen-scorpia-speargun-90cm-110cm Tomorrow afternoon will come to this store and buy this speargun
@dieli9499
4 жыл бұрын
@@RobAllenSpearfishing will buy 90cm or 100 cm one i think,lets see tomorrow when i put my hands on it
@dieli9499
4 жыл бұрын
@@RobAllenSpearfishing actually i have 2 choices ,buying scorpia or this one spearfishing.com.au/collections/spearguns/products/rob-allen-sparid-railgun Any advise before i buy tomorrow?
@RobAllenSpearfishing
4 жыл бұрын
@@dieli9499 If you can choose, the Sparid is the better gun. You can upgrade that model, no a good idea to try upgrade the Scorpia.
@staniscombrink3197
4 жыл бұрын
Hi rob what is the main differance between a tinted cubera mask vs regular cubera mask
@urb6857
4 жыл бұрын
One's tinted.
@RobAllenSpearfishing
4 жыл бұрын
Only the tint.
@DeepBlueSpirit2
4 жыл бұрын
Tinted mask glass: your eyes are basically not visible due to the tint (colored layer). Some fish react to human eyes (= the eyes of a predator) which can spook them away, so it can be very useful to hide your eyes (and your intentions hahaha) by a tinted or reflective mask glass.
Пікірлер: 41