Robby definitely slapped the crap out of that Jeep ! 👀 🤔 👍🏻 🤣
@Garth2011
2 жыл бұрын
Nice inventory of WD-40... This is a nice design for a bumper...No more broken tail lights plus a beefier hitch.
@DesertRunner9875
2 жыл бұрын
Hey,, your paint booth looks just like mine. 🤣
@KB-gs8zi
2 жыл бұрын
Hey Colt !! Very Impressive with the ""FAB"" & Weld !!! 🤔🤗 Be nice to see the ""RATS NEST "" when you finish it & Painted !! 🤠😎😮👍👍👍👍👍
@aaronb7990
2 жыл бұрын
13:50 The Dry Lube is AWESOME! I use it for anything that it works for. My Jeep and RC cars probably benefit the most with the lack of dust collection. Other favorite uses are little things that can't be opened, locks expecialy so keys don't get oily and it gets in everywhere for excellent lubrication.
@TheOldaz1
2 жыл бұрын
Nice job on the bumper. I've found the off-cuts from the RHS/SHS when cut on a suitable angle make excellent gussets. Thanks Colt.
@dennisgeroux4483
2 жыл бұрын
I like fabricating things like the bumpers and things like that. Yes the steel is really high but our local steel supply house has a cutoff area where I like to go through and pick up different pieces of steel and get a little better price. Nice to see Robby come by and slap your Jeep around.
@Mike-xq6ce
2 жыл бұрын
Man... My obsession with 2 door XJ's has hit a peak seeing this video... So cool! It is basically my life mission to find one in good shape and drive it until i die. Some people want Lamborghini or Ferrari... Not me. 2 door XJ. Preferably an old forest service version. There is one guy in my town i know who owns one and it looks like it rolled off the show room floor yesterday.
@knowledgeseeker3188
2 жыл бұрын
Lots of fun
@abqcrutch
2 жыл бұрын
I dig BleepinJeep. Love yours and Matt's videos. Great together and yet each have your own style. Love your 2-door XJ. Hope to buy one next summer.
@davidfarmer1666
2 жыл бұрын
Great video and plan to watch a lot more. Came over from Robby's site automatically, he must have had you linked. I will have to thank him. I'll just add myself to your viewer site. Thanks for the interesting video and stay safe.
@bleepinjeep
2 жыл бұрын
Thanks for watching and subbing😎👍
@raystevens687
2 жыл бұрын
nice job Colt can't wait till you do the next adjustment of your Jeep.
@bleepinjeep
2 жыл бұрын
Thank you
@chopperchuck
2 жыл бұрын
The way I remove plating not anodizing at home is with some muriatic acid from the hardware store works really good and the parts are clean as a side note I've been a welder and a fabricator for 40 years
@motownXJdad9565
2 жыл бұрын
Easy off oven cleaners removes anodizing from aluminum, not sure about steel. it also removes maint from plastic without harming the plastic at all.
@chopperchuck
2 жыл бұрын
@@motownXJdad9565 well aluminum anodizing And the plating that are put on steel are two completely different things just saying
@mefriend8965
2 жыл бұрын
Anodizing is for aluminum. Steel is plated. Those bolts and nuts are more than likely cad plated, by the color.
@chopperchuck
2 жыл бұрын
@@mefriend8965 I miss spoke I know there's a difference between anodized aluminum and the plating that's put on steel to protect it Been spending too much time around people that don't know the difference in call every piece of plated metal anodized I didn't catch that at first but now that I reread my comment
@Snarge22
2 жыл бұрын
I really enjoyed BleepinJeep's FC build yet my favorite Jeep is the 2-Door XJ series. Time to go watch more of Colt's videos on this project. 🙂
@camndino
2 жыл бұрын
Hah , you guys made Robby famous. ( the fact that he’s funny and smart don’t hurt)
@NoWr2Run
2 жыл бұрын
SIR, YOU DEFINITELY HAVE THE SKILL'S.
@NoWr2Run
2 жыл бұрын
IMHO U BUILT THE BADDEST ROCK CRAWLER IN THE COUNTRY, UNREAL WHERE IT GOES, ALSO SOUNDS KRAZY.
@marygrace5231
2 жыл бұрын
Looking good & strong.
@jordantrujillo293
2 жыл бұрын
Honestly, I should build my own bumper after watching this! I looked at Filthy Addiction Offroads bumper. But to be realistic I’m on a budget with a kid on the way. Thanks for the video and ideas!
@bleepinjeep
2 жыл бұрын
You're welcome, thanks
@albertdehn8381
2 жыл бұрын
Thanks for sharing 👍😀
@moabwheeling1305
2 жыл бұрын
Man, colt your bumper came out really nice sir . Looking forward to your bodywork and painting videos . Take care sir.
@bleepinjeep
2 жыл бұрын
Thank you!
@StormbornJKU
2 жыл бұрын
You do solid work with a very basic shop. It’s really cool to see!
@johnhamilton2680
Жыл бұрын
bleeping rocking it!!!
@dougalexander7204
2 жыл бұрын
New subscriber. A friend of Robby’s is good enough for me. Wish you well and take care.
@donlarsen9807
2 жыл бұрын
How about gifting some WD-40 anti-squeak to Miss Holly!? It seems that she has tried to get rid of the squeaks and has had no luck. I've never seen a well maintained vehicle like hers squeak so much. Thanks for the video and keep them coming. Stay safe healthy and happy 👍
@gayle4804
2 жыл бұрын
It's a small world, You are very intelligent persint person You'll get it fabricated correctly
@roygotham
2 жыл бұрын
Job well done 👍 thanks for sharing snd love your paint shop it looks a lot like mine 😂.
@johnguilfoyle3073
2 жыл бұрын
The welding light is bright enough to harm your eyes, but the phone screen is not, therefore it is safe for your eyes. Modern cameras have the ability to only process what can be used by the phone. The first color camera on the Moon was on Apollo 12, but the video processor got burned out when the lens was pointed at the sun. Cameras have been designed to protect themselves from too much light since then.
@joshuazientara4452
2 жыл бұрын
Very nice. Thank you for sharing.
@jacobfulton5106
2 жыл бұрын
You definitely don’t want to vertical down those shackle mounts😬 They might hold up, but you dont get nearly as much penetration as you would if you welded laying flat.
@scottcarr3264
2 жыл бұрын
Hello, someone else out there who know how to weld properly, I was going to comment exactly the same, Either in the flat or Vertical UP. I would have preferred to have full length plates through the whole RHS and welded Back and Front, it is stronger.
@wewi3101
2 жыл бұрын
For WW2 Jeep parts there are about 30 of them In Pope valley CA. At the Pope valley garage.
@dixiemae5042
2 жыл бұрын
For our old ‘66 International Harvester Scout … yes had to add the International Harvester … we just used a hundred some year old salty rough cut 2x4 from an old salt box 💁🏻♂️
@randyjones2494
2 жыл бұрын
Great to see Robby On your channel if you’re getting body work done he’s the man great to see you both!
@dough5626
2 жыл бұрын
Tip for Welders, Take galvanized parts, including posts you need to weld together for chain link gates, nuts, bolts, etc.etc and dip into acid for about 30 seconds, dip in water to rinse, dry and weld....... WORKS AWESOME.....
@beau7160
2 жыл бұрын
always impressed with the work. my xj is sad it doesnt get this level of attention.
@NoWr2Run
2 жыл бұрын
Neither does my 97 Grand. I do Maintenance on it but NO WHERE NEAR HIS SKILL LEVEL. It needs Rockers & a few patch panels welded in underneath, NOT BAD THOUGH, NO VISIBLE BODY RUST.
@sailorjoe6634
2 жыл бұрын
Nice job on the bumper.
@BarnyardEngineering
2 жыл бұрын
The "cell phone welding lens" doesn't let you see the puddle, though. You still need the shade.
@jamessmith7691
2 жыл бұрын
A good video with creative thinking.
@TrevorDennis100
2 жыл бұрын
Robby Layton is one of the funniest people on KZitem. He is always doing crazy things and I always get some laughs watching his channel. He is also a truly awesome body man. His prep and paint process is even better than Kindig Customs. WD40 is a great product to have as a sponsor. I personally use it mostly for machining aluminium and brass, but I did not know how broad a product range they have until seeing it on Millennial Farmer, who is also sponsored by them. A nice job on the bumper. Looking forward to seeing you collaborate with Robby. Just one wee thing you need to be warned about... He does wicked spoofs of his friends and fellow KZitemrs. His Matt of Matt's Off Road Recoverys had me creased up laughing, and he gets his entire team involved when making his sends ups.
@dixiemae5042
2 жыл бұрын
Bumper and all looks good 👍🏻👍🏻
@harveystephens6115
2 жыл бұрын
Nice job! Enjoyed watching
@bleepinjeep
2 жыл бұрын
Thanks for watching!
@OfficialStumpMan
2 жыл бұрын
It’s weird seeing Robbie and a T-shirt and shorts. LoL
@danrussell3439
2 жыл бұрын
Great video
@davidbrooks4294
2 жыл бұрын
You should send some of that WD40 dry lube to Holly for Mischief Maker . And I thought Robbie had a Hot Rod and a Mail Van to work on , besides his Jeep.
@fallguy173
2 жыл бұрын
Same thing happened on my 46 Jeep. Be prepared to rebuild the transfer case as well, because of the oil passage that connects them.
@riverlee001
2 жыл бұрын
I need that Milestar banner in my garage
@garytingler3222
2 жыл бұрын
Nice build and good info
@lonhoschar1943
2 жыл бұрын
That bumper looks pretty sweet!! Nice job!!
@everettdegrasse8478
2 жыл бұрын
Looking very nice.
@donaldhalls2189
2 жыл бұрын
Great job, all the best
@mridaho7871
2 жыл бұрын
I can’t believe that right after you give Bobby a tour of the Rats Nest, you turn around and paint the bumper with a brush. I can see the spoof now: Bobby says ‘I’m going to go give the 67 Cougar a Bleepin Jeep paint job’ then turns and walks into the paint booth with a paint brush in his hand.
@MrRDJEEP
2 жыл бұрын
👍👍
@bbearhug
2 жыл бұрын
I don't know if it would, but you could damage the lense sensor with the bright light. Maybe not all at once, but over time possibly.
@stevegranger818
2 жыл бұрын
Love your channel and Robby Layton's as well. Keep up the good work. I do have a question for you though... Are you sure that welding those brackets flush to 11 ga (.12") steel will hold when attempting a rescue? I 'd be afraid they would rip out. Less than 1/8" is not a lot of metal.
@JSBriggs
2 жыл бұрын
Robby and his #jorts FTW!
@r.watson1928
2 жыл бұрын
I know nothing about Jeeps that crawl over rocks in general being from East Texas, but often watch them on KZitem. One question I have is would a rolling front and rear bumper work ? I'm thinking more in line with the type of rollers seen on the rear of oilfield winch trucks which allows things to roll up on the bed of the truck without getting caught or hung up. Putting one on the front and back would be something to check out.
@bleepinjeep
2 жыл бұрын
There's been a few people who have tried that. I never really saw much difference in the capabilities though👍
@r.watson1928
2 жыл бұрын
@@bleepinjeep -- Okay, I appreciate your time.
@stevenzinn6011
2 жыл бұрын
Don’t forget to visit the scrap metal yards. You should be able to buy metal cheaper by pound.
@kennethsonier1766
2 жыл бұрын
That's a fine job of fabrication Colt 👍 the only question I have is why didn't you spray it and avoid all the brush marks 👍☮️🇺🇲
@Jarod1941
2 жыл бұрын
Who's Colt?
@kennethsonier1766
2 жыл бұрын
@@Jarod1941 the dude doing the fabrication
@bleepinjeep
2 жыл бұрын
Because we brushed the front bumper as well and the cage inside to match is all.
@cbforme
Жыл бұрын
Wd40 was designed to displace water on the titan rocket
@overalladventure5912
2 жыл бұрын
Nice upgrade!
@MrFturner
2 жыл бұрын
Do you put in drain holes when you close of the steel tubing like the 2x4? One concern we have is the condensation build up that happens inside the closed steel because of temperature changes. I've seen it where someone's closed bumper rusted from the inside out because the water had know where to go. Just wondered your thoughts on that.
@bleepinjeep
2 жыл бұрын
Normally no, but I have been known to spray the inside with WD40 before sealing it off.
@mclarenscca
2 жыл бұрын
Wait! How did I miss the part where you broke the Samurai? That bumper looks awesome!
@bleepinjeep
2 жыл бұрын
We broke it on the trails in South Dakota. Gotta click that bell for all the latest videos😎👍
@mclarenscca
2 жыл бұрын
@@bleepinjeep trust me, it is. But, you know how KZitem is. Sometimes I don't get the notifications.
@billocampo1365
2 жыл бұрын
Just have a question, just wondering why didn't you cut the steel bumper longer and cut it 45 deg. to make it look like a single or one piece bumper?
@boblee3444
2 жыл бұрын
C&C equipment has new jeep bodies for sale
@mikeshultz1007
2 жыл бұрын
If those nuts are actually meant to be welded on then they are likely copper coated just like how er70s-2 welding rod and wire is copper coated.
@kevinking3402
2 жыл бұрын
Colt, don’t let Layton touch the axles on your Suzuki. Just don’t….😂🤣
@Skiridr22
2 жыл бұрын
Those Colt built fender flares still holding it down.
@yatessmyrna
2 жыл бұрын
They make welding hoods without lenses that use cameras and an LED screed.
@timothyargento8457
2 жыл бұрын
Nice job.
@timbaxley383
2 жыл бұрын
🙂
@randytravis3998
2 жыл бұрын
did you leave a drain hole in the bumper ?? did you spray the inside to keep it from rusting inside out ?? when you welded the pulling lugs on the face of the bumper , will the box tube hold up to pulling or will it rip the box tube apart ?? might need to do like what Matt did on the wrecker bumper / air tank / weld a stud threw the bumper to keep the box tube from warping or ripping ,, Just my thought .. great video .
@OfficialStumpMan
2 жыл бұрын
I’d like to see the Willys built like Paul’s Toyota. Just an over the top trail rig.
@gregsmechanicshop5446
2 жыл бұрын
Looks like you got the Roby Layton slap of approval.
@jefftabor595
2 жыл бұрын
Good content and great to see Robbie and he slap party.
@skistrycharski6999
2 жыл бұрын
My wife would go bat Shit on front lawn storage parking lot. Your wife is a saint,🙏🏻 ! LOL
@vavendano2000
2 жыл бұрын
looks good Colt, but wouldnt it be better to use clevis mounts that go all the way through the bumper and welds to both the back side and the front? just my .02 cents. lol
@levidbateman5174
2 жыл бұрын
Did you add a small gusset to the inner part of the mount? Like rear plate down to side of one of the nuts?
@craigcarlberg3725
2 жыл бұрын
Great video as always. Colt I have a 01 wj limited with the 4.7 I'm having intermittent starting issues and feel like I've gone thru everything could I pick your brain if you have any ideas
@bustedcherokee
2 жыл бұрын
Great video! I saved for 3 years to buy my current xj, month later the motor is really rough. If anyone has a coil pack motor for a good price let me know!
@bigbird8617
2 жыл бұрын
The anodized pieces looked to be nutserts
@joemontalvo50
2 жыл бұрын
Trying using Waze next time
@edchenal821
2 жыл бұрын
Good "how to" comments.
@rjm7168
2 жыл бұрын
Anodizing is for aluminum and nonferrous metals. Do you mean cadmium or yellow chromate plated?
@SevenToes
2 жыл бұрын
For the recovery points did you cut thru the tube and weld them from the back (frame side) also or is it strong enough just welding from the front? Beginning to source out metal for my bumper and I've never added recovery points before.
@poorkitnerd2631
2 жыл бұрын
I need to pull dents and paint my xj
@mustangfreak54
2 жыл бұрын
Where did you get the fender flares from ?
@denniscleveland669
2 жыл бұрын
What’s the metal cutoff saw you’re using?
@hawkeyejohnny968
2 жыл бұрын
Couldn’t your back bumper be used as an air tank? Even if it only held enough air to inflate one tire it might come in handy.
@norcoredneck
2 жыл бұрын
Those parts are not anodized. Probably plated. If you ever need to strip galvanize coating use muratic pool acid.
@chuckspencer8875
2 жыл бұрын
I'am not sure but did you just weld a 2.5x2.5 x1/4 receiver to a1/8 bumbper
@bleepinjeep
2 жыл бұрын
Yes. I. Did. 😎👍
@luckgaming1761
2 жыл бұрын
Who knew Robby had the body of a 68 year old child
@TJfromAZ
2 жыл бұрын
Amazing work!! Loved seeing Robbie!
@jeepguy04
2 жыл бұрын
if u were going to engine swap a wrangler 98 that has a 4 cyl in it would it be the easiest just to drop a 6cyl 4.0 liter that was in the same wrangler tj i have the se that has the 4.10 gears already thanks love the channel
@bleepinjeep
2 жыл бұрын
Usually yes, if you have a tj donor that has a 4.0 so you can grab the mounts, harness, etc.
@kennyyoung3047
2 жыл бұрын
What kind of fender flares do you have I can’t find any for my xj
@bleepinjeep
2 жыл бұрын
I made them from 2 sets of factory flares
@middleway1885
Жыл бұрын
Boop
@jeffreymoss3925
2 жыл бұрын
I have a 2001 XJ that squeals like crazy upon starting from cold with the air on until it warms up. Air blows nice and cold but l have to wait til it gets up to normal operating temperature. I just replaced the serpentine belt and no change. I'm thinking either the fan clutch or the idler pulley. Any ideas?
@jdougn2255
2 жыл бұрын
Could easily be the belt needs more tension.
@cactusbaboon321
2 жыл бұрын
You are missing out on a sponsor oportunity here by not promoting which metal cutting chop saw blades you use-
@dixiemae5042
2 жыл бұрын
Robby was way way far from home 🤣🤣
@bertwalts3211
2 жыл бұрын
Gas money
@deanwills4824
2 жыл бұрын
Unibody not unit body
@kennethlewellen9553
2 жыл бұрын
Good looking bumper just curious are you married I never have seen ur wife if u are
Пікірлер: 145