Repairing a RoboRock S7 MaxV that I bought as not working and for cheap. Link to video for dissasemble: • Video Link to part 2: • RoboRock S7 MaxV Repai...
Excellent work, a video of how to replace the motherboard would be much appreciated as its the #1 most wanted video for this machine for people who bought china version and want to use it in other parts of the world due to geo restriction. Thank you for your professional videos 👍🏼
@LUNORTEK
11 ай бұрын
Thank you for the comment :-) Unfortunately I lost the video where I did the motherboard repair from the water damage, but I will try to make a video as you suggested.
@techyhead4050
5 ай бұрын
Hello- Where do you but the parts and have you made the motherboard video?
@LUNORTEK
5 ай бұрын
@techyhead4050 I bought the parts on Aliexpress. No sorry, have not made a motherboard video.
@goku445
3 ай бұрын
Great job!
@LUNORTEK
3 ай бұрын
Thank you :)
@rokjurse340
Ай бұрын
Hi, good job! I have a q7 and the side brush stoped spinning, I've replaced the brush and the motor but it still doesn't spin. Any ideas? I've tested the motor and it does work.
@LUNORTEK
Ай бұрын
Weird? Try a reset and an update first, it may be a bug in the software. If that dont work, test the voltage on the wires to the motor.
@atillaucak598
2 ай бұрын
Hello, my Roborock S7 Max Ultra drew water into the robot. My child started the water pump in the bottle and the robot sucked the water flowing onto the ground. After that it started giving internal error and fan error. what should I do. Is there any chance of saving the robot?
@LUNORTEK
2 ай бұрын
Take it apart and dry everything. Most of the components are available to buy and change if anything has been severe damaged from the water.
@rafaelgouveia9728
11 ай бұрын
hello, my roborock S7 since yesterday does not start cleaning, when you try to start cleaning it restarts and shows that it has no battery, even leaving it charging and in the application it shows 100%, it restarts and soon after it appears 0% battery, could you help me , as here in Brazil there is no technical assistance, I will have to do it myself, could this type of defect be a battery or board, or even a fan? I noticed that inside the dust reservoir was a little wet, do you have any tips? I thought about buying a new battery, but I wanted to do tests so I didn't buy the part for nothing.
@LUNORTEK
11 ай бұрын
Hi, First of all I would take it apart and check for water inside the robot because you noticed water in the dustbin. Remove any water that you find and reset your robot. If this does not work it could be the fan motor or something with the main board. Best of luck with your repair!
@rafaelgouveia9728
11 ай бұрын
@@LUNORTEK Thank you very much, I will check and give feedback
@eolooknayngi
6 ай бұрын
@@rafaelgouveia9728경험에 의하면 배터리 내부의 셀 한개가 매우 낮은 전압으로 밸런스가 달라져 있을 겁니다. 그게 원인으로 추측됩니다. 로보락 제품들이 배터리 밸런스 문제가 자주 나타납니다.
@jon964
7 ай бұрын
Have you fix the Error 27 VibraRise jammed before ? (S7maxv)
@LUNORTEK
7 ай бұрын
Hi, I have had no issues with the VbraRise. But maybe it will help to take it apart and see if something is out of position or something is stuck inside the mechanism.
@justswitchingvanput887
9 ай бұрын
Hello watched the vid ty very much so far got everything off except the cover to reach the fan.. when u acces the main board im missing a screw or something?? Because i cant get the top cover off At 3:45 im lost... Plz help!?
@LUNORTEK
9 ай бұрын
I will have a look and see if I can answer your question. Will leave a new comment here when or if I figure it out.
@justswitchingvanput887
9 ай бұрын
@@LUNORTEKTy for the fast reply appreciate it!
@LUNORTEK
9 ай бұрын
Did you follow the link in my description that leads you to the disassemble video?
@justswitchingvanput887
9 ай бұрын
Yes I did I missed the 2 screws at the bottom.. at the mopping section😅 but it worked for me there was a big piece of rubber that covers the fan motor, inside the motor. So cheers mine works again thanx again!!🎉
@LUNORTEK
9 ай бұрын
So great to hear! It can be quite frustrating not figuring out how stuff come apart, but so rewarding to fix things when they work again 😊
@MrLecher69
6 ай бұрын
Hi there! My wifi doesnt reset, no flash light no voice command. Took apart, the antenna cable was broken, replaced it but doesnt help as it doesnt reset. Any ideas where to look for issue?
@LUNORTEK
6 ай бұрын
If the Robot is completely dead, I suggest starting on the power from the battery and check the voltages towards and on to the circuit board and so on.
@MrLecher69
6 ай бұрын
@@LUNORTEK Its not dead. Everything works good. Only issues wifi doesnt react at all. All buttons work, did factory reset, vacums fine manually, but wifi doesnt work at all, no flashing light while resetting and no voice command for reseting.
@LUNORTEK
6 ай бұрын
@@MrLecher69Oh, I see.So what kind of method do you use when resetting? I know there are two methods that works and one of them resets also the firmware. Maybe it will work if you have not tried. I will see if I find it again, I have forgot it...
@LUNORTEK
6 ай бұрын
@@MrLecher69 Here are the two methods: System Reset: If the robot does not respond when a button is pressed or cannot be turned off, reset the system. Press the Reset button, and the robot will reset automatically. Note: After resetting the system, scheduled cleaning, WiFi, etc. will be restored to factory settings Restore Factory: Settings If the robot does not function properly after a system reset, switch it on. Press and hold the button and at the same time press Reset button until you hear the “Restoring factory settings” voice prompt. The robot will then be restored to factory settings.
@MrLecher69
6 ай бұрын
@@LUNORTEK did hard reset, by pressing recharge button and reset button, voice command told its resetting to factory setting. But wifi still off. Starting to think maybe wifi bear is shoot.
Пікірлер: 36