Can't believe BPS space is actually commenting in here
@traxonja
Жыл бұрын
Roses are red, violets are blue... 😂
@nukegamez8686
Жыл бұрын
Everybody gangsta until he inserts a payload inside it
@haydentravis3348
3 ай бұрын
Were the engines full throttle?
@josephastier7421
2 ай бұрын
@@haydentravis3348Those looked like demonstration engines only. You wouldn't want to try a maximum performance flight until characterization testing was completed.
@long_chin_man
Ай бұрын
it will suddenly know where it is. because ultimately, it knows where it isnt.
@mymentymen8185
Жыл бұрын
Damn did you guys really basically build a missile from scratch by yourself? That is insane. It also looks really slick the flight looked very smooth. Very impressive. Can't imagine the amount of work that went into it.
@corruptedmineral
Жыл бұрын
American DIY content be like
@ghostraptor2068
Жыл бұрын
@@corruptedmineral 'murica!
@AssassinGT
Жыл бұрын
@@corruptedmineral Hate to break it to you but, this takes place in china. You can see at the end of the video it even states NUAA. stands for "Nanjing University of Aeronautics and Astronautics" most of the development software was in Mandarin as well.
@daomingjin
Жыл бұрын
@@AssassinGT most places in china have absolutely banned drone flights of any kind. They're afraid of "the people". Imagine if chinese have access to 3d printers and a chemistry lab? Yea, they could launch a rocket attack on pretty much any CCP asset.
@mankihonda983
Жыл бұрын
I haven't checked the legislation in 15 years but I do remember model rocketry getting a lot of scrutiny in regards to their onboard control systems. They were only allowed very rudimentary controls if you had anything like in this video the feds would have probably locked you up for domestic terrorism and manufacturing guided missiles. Be very careful when even considering making something similar, check your locals laws and such and never assume good faith from law enforcement. Those days are long gone.
@kekulta
Жыл бұрын
The missile knows where it is at all times. It knows this because it knows where it isn't. By subtracting where it is from where it isn't, or where it isn't from where it is (whichever is greater), it obtains a difference, or deviation. The guidance subsystem uses deviations to generate corrective commands to drive the missile from a position where it is to a position where it isn't, and arriving at a position where it wasn't, it now is. Consequently, the position where it is, is now the position that it wasn't, and it follows that the position that it was, is now the position that it isn't. In the event that the position that it is in is not the position that it wasn't, the system has acquired a variation, the variation being the difference between where the missile is, and where it wasn't. If variation is considered to be a significant factor, it too may be corrected by the GEA. However, the missile must also know where it was. The missile guidance computer scenario works as follows. Because a variation has modified some of the information the missile has obtained, it is not sure just where it is. However, it is sure where it isn't, within reason, and it knows where it was. It now subtracts where it should be from where it wasn't, or vice-versa, and by differentiating this from the algebraic sum of where it shouldn't be, and where it was, it is able to obtain the deviation and its variation, which is called error.
@KabelkowyJoe
Жыл бұрын
If it was that simple "algebraic sum" :) It should use some PID, because relation between how wings are adjusted and how should be set. Depends on various factors like for example speed or size of wings. Greater the speed lower the feedback should be, but not always if it would be too loow - SpaceX lost fuel, could not adjust it's position fast enough and fliped over. To not cause too much correction than necessary causing in consequence loosing it's trajectory in opposite direction - making it even worse. Simple PID should be set, to set P and I and D module properly you have to test it couple times. One to react quickly over-reacting, other integrating change add some "trim" and third simply multiply by some factor I hope you know all of this, just wrote for everyone else - it's not that simple, although more or less, way you described. Perfect algorithm would "learn" during long flight could gather information and subsequently adjust PID parameters to end up with minimal deviation. It's difficult if you deal with rocket.. to learn i hope they continue for example set goal of hiting target like baloon or something in the air :) That would be cool. First baloon with GPS attatched and both connected. Second time only visual. Private defence system :)
@Flumphinator
Жыл бұрын
Beat me here.
@user-gr9un8ni3i
Жыл бұрын
I knew I'll see this comment
@emerychandler
Жыл бұрын
You win the internet
@Ilya5522
Жыл бұрын
Classic
@GuyJustCool
9 ай бұрын
The idea to stabilize the descent center of lift vs center of mass by jettisoning the bottom stabilizers is amazing, love your project. Its actually first non-sounding (actively stabilized) rocket i see on YT
@macstrong1284
8 ай бұрын
Joe Bernard
@WarDucc
5 ай бұрын
wait, missiles have a center of lift? i tought they worked with high twr's ? and another question, what if they don't have one? or is it even possible?
@GermanTopGameTV
5 ай бұрын
@@WarDucc Anything has a center of lift. It's the point where all integral aerodynamic forces are located. You know, the wing surfaces generate lift and drag - which are nothing but two components of a force vector. These local force vectors can be integrated over the entire craft (as any surface will create some drag, therefor an aerodynamic force) and you will have a vector that has a direction and an origin, and said origin is called the center of lift. Since lift forces are usually orders of magnitude bigger than drag forces (at least for high angle of attack configurations) we call this principle "Center of lift". It plays a crucial role in vehicle stability. A stable system will always try to orient the center of lift behind the center of mass for a moving object. The feathers on an arrow demonstrate that principle very well. You put them on the end to keep the arrows flight path straight. A slight deviation from the straight orientation will increase the angle of attack on the feathers and force the arrow back into a straight flight path. This means a deviation is met with a counteracting force and self balances the object. "Straight as an arrow" comes to mind. If you put the center of mass behind the center of lift, the opposite happens: A small change in angle will, again, create a force on the guiding surfaces of the vehicle. This force, however, is now acting in such a way that itself increases the angle of attack even further. This results in a larger force, finally flipping the vehicle such that the center of lift now is behind the center of mass. The thing about aerodynamics is, that lift and drag are functions of the Reynolds number. Changing flight conditions will result in changing aerodynamic forces. You need to account for all states of flight to ensure your vehicle is stable thoughout. Especially the transsonic regime is acting up, as many properties of airfoils change dramatically in this environment. I somehow doubt that this was a consideration on this project though. To conclude: Jettisoning the lower fins simply removes their aerodynamic forces from the overall integral of all force vectors. If you remove a vector far away from the center, it will effect the resulting position of the center significantly. The rocket basically turns the direction of the arrow mid flight - from having "small feathers" up front and "big feathers" in the back to only having "small feathers" in the front, making it the new rear of the arrow as it inverted.
@davidlee1770
5 ай бұрын
@@WarDucc well, rockets have a center of lift and they are essentially oversized missiles. For missiles, center of lift isn't about generating enough lift to take flight, it's about keeping the missile stable during flight. If the center of lift is ahead of the center of mass in the direction the missile is moving, then the missile will attempt to invert itself, since the center of lift always tries to stay behind the center of mass for stability. To counteract that, missiles have fins on the rear that push the center of lift behind. However, when the missile is vertically falling and the parachute is installed on the nose, then the original design is very unideal, as the missile will now try to fall nose first to maintain stability. To counteract this, we need to push the center of lift further up the missile. The team here achieved this by jettisoning the fins, which pushes the center of lift further up so that the missile can fall thruster down.
@WarDucc
5 ай бұрын
thanks!@@davidlee1770
@licao8055
Жыл бұрын
Nanjing University of Aeronautics and Astronautics, Undergraduate Innovation Lab. This is what the credit says at the end of the videos.
@salauddintafsir8761
Ай бұрын
If you student of that university please contact with me
@alfatejpblind6498
28 күн бұрын
Undergrads? These dudes are hardcore
@qualifiednot
Жыл бұрын
Ejecting the fins to change the center of pressure is so smart
@eh6971
Жыл бұрын
But why not connect them to the fuselage with a thin cable?
@qualifiednot
Жыл бұрын
@@eh6971 Are you saying to raise and lower them? that would require some sort of actuator or spring based mechanism to move them, the reaction forces would probably be weird too. ejection is probably the least complex mechanism to remove the fins and make it so the rocket naturally wants to point down after it hits the highest point in its travel.
@dom_the3166
Жыл бұрын
@@qualifiednot I think he means using a thin wire to retain them as they eject
@evanweir169
11 ай бұрын
What is the purpose of ejecting the fins at the rocket's apogee? You mention changing the COP, but to what end?
@pipinggpipingg1487
11 ай бұрын
@@evanweir169 fins causes more drag at the back of the center of the mass thus would make the rocket wanna point towards the ground on the descend so they couldn't use the parachute effectively . Wires on fins could still cause the same effect as fins would float up relative to the rocket on the descend and would still be pulling the bottom of the vechile and force it to point downwards .
@shitboxlife
6 ай бұрын
The quality of craftsmanship in your videos is impressive. Not only are the concepts you are working with at the high end of things people can even understand, you do it with a build quality that matches industry items. Well done and keep it up!
That looks really cool, thanks for showing the cad models and the inside as well :)
@darielrodriguez6984
11 ай бұрын
There's still hope for the generations to come. glad to see these awesome geeks kicking the coolness out of measuring levels
@ege8240
3 ай бұрын
obviously? new generation is always more advanced with the amount of resources and total knowledge increasing
@FireFly969
2 ай бұрын
Yep you are right, there is always a percentage of people who are interested in different things, and the harder things are there will be less people interested in, or specializing in. There is nothing easy to watch TikTok all day, and the hard things, for example learning how to make missiles, drones, planes cars....@@ege8240
@parsonsjs
11 ай бұрын
Incredible control nice work guys ! As someone with a control engineering background this is a very hard project to pull off. Well done
@Yuralittlebitchn1gga
11 ай бұрын
ive seen more stable fireworks ]
@TrungNguyen-mj2id
5 ай бұрын
With control engineering background, I don't think it looks hard. A simple pid controller should work. The hardest part comes wih trajectory control which in turn boils down to navigation part.
@mattmurphy7030
4 ай бұрын
@@TrungNguyen-mj2idas someone with a control engineering background, this is not an easy project to pull off.
@abdullaal-bader46
4 ай бұрын
as someone with a control engineering background, this is not an easy project to pull off.
@plugg1160
3 ай бұрын
@@TrungNguyen-mj2id as someone with a control engineering background, this is not an easy project to pull off x3.
@velocitylaunchsystems
Жыл бұрын
This is incredible! Insanely impressive work
@haseebkhawaja1050
8 ай бұрын
As a mechanical engineer. This really is very impressive...
@bun72642
Жыл бұрын
Your work is amazing , keep it up
@micheldriessen5081
8 ай бұрын
We used to play with rockets 35 years ago. But with what is available now, you have a world of exploration extra. Nice job ! Keep up the fun for the rest of your lifes.
@flat-earther
8 ай бұрын
hi micheldriessen, have you become a flat earther yet?
@SuperGarryGamer
6 ай бұрын
@@flat-earther meow
@YavuzSelimKpnk
11 ай бұрын
Tam beklediğim performans. Çok güzel çalışma olmuş. Zekice düşünülmüş bir sistem. Roketin kalkış esnasında yalpalanma olmaması için eksenini düzelten bir kanat sistemi (gyroskop ile ) yapılmış. Cidden çok havalı ve güzel. Tebrik ederim.
@mikethezipper
Жыл бұрын
Your videos inspire me. Aboslutely amazing work. Im so happy to see you have the resources to execute such a cool project.
@AhmedAdly11
Жыл бұрын
Most importantly, it looks like China has made a mechanism that brings creativity into creation.
@evanweir169
11 ай бұрын
@@AhmedAdly11 what do you call the mechanism. the one that brings creativity into creation?
@AhmedAdly11
11 ай бұрын
@@evanweir169 one good mechanism is supporting students to carry out projects. In Egypt, such a project would be banned on the basis of national security. (it is a 7 year jail for using a drone)
@kioly_ah
11 ай бұрын
@@AhmedAdly11 it's really sad that they kill the people's creativity and productivity.
@AhmedAdly11
11 ай бұрын
@@kioly_ah If you come from a free country, you could not imagine. Military dictatorship is a horrible thing. China is lucky in comparison. Also, they went from dark to light! So what we see now should be considered incredible leaps forward. Also that they will continue in that direction.
@EliteWorm
8 ай бұрын
This is INSANE. Congratulations, guys! Truly impressed.
@flat-earther
8 ай бұрын
hi eliteworm, have you become a flat earther yet?
@Adam-en4zm
8 ай бұрын
Very impressive work guys, I'm sure you have a bright future with those kind of skills.
@ruhruhruhruhruheisjsij
5 ай бұрын
As in a nuclear bomb flash type of a bright future
@NoahHagen
Жыл бұрын
I’ve been subbed for a while and wow I can’t believe the progress.
@eisnarf
Жыл бұрын
Great project and great video🙌🙌
@TheBeardedEngineer
Жыл бұрын
Just keeps getting better and better!
@silentblackhole
11 ай бұрын
Everything looks so well made! Awesome work! how long did it take from start to good launch? Did you use any open-source software? In particular for flight control or cad designs?
@mbunds
Жыл бұрын
I have been wondering, how important is it to place an IMU at the exact center of mass? It looks like most systems keep the chips very close to this center, but a few millimeters off of the center doesn’t affect accuracy in any negative way. Beautiful work on this guidance system!
@trollmanman5576
11 ай бұрын
Theres only two thing missing in the rocket, copper and some explosives 😅
@DandSCreations
11 ай бұрын
@@trollmanman5576that's on our channel lol
@MarksXmanKami
11 ай бұрын
@@trollmanman5576 just one Copper rod and a cone away from being an ATGM
@jmspaceR
Жыл бұрын
Soo inspiring! Keep up the great work!
@LEON-zo7ce
8 ай бұрын
Very very, very impressive ....imagine the hard work and determination needed to create such a project ....
@TornadoBox
Жыл бұрын
This was well shot and produced! Kudos!
@mrsenator9106
Жыл бұрын
As an engineer, I salute.
@rohanbandaru
Жыл бұрын
My day gets better any time L Shang uploads
@dragosd977
11 ай бұрын
This is exceptional, great work !
@cigp
8 ай бұрын
what software appears at minute 1 ? what are you testing? some sort of IMU ?
@hemlatagautam3831
Жыл бұрын
Made my Day .... incredible work!
@sajedrezaei5044
Жыл бұрын
Great work thanks a lot for sharing
@lepermunna
Жыл бұрын
awesome project and so well executed!
@Adri-242
Жыл бұрын
Wow really impressive!! Amazing work and skills!
@VisualBasic6
Жыл бұрын
After watching this video thoroughly on multiple occasions. I can confirm without any doubt that the missile knows where it is at all times. (It knows this because it knows where it isn't.)
@GarageSteve420
Жыл бұрын
Beautiful. I think I'm gonna go design something now
@Pedro.Lustosa
21 күн бұрын
What a nice engineering project! Great work, guys. Congrats!!!
@Ma_X64
Жыл бұрын
Very cool piece of engineering! So neat and accurate.
@Skillot888
4 ай бұрын
he really said: "i aint spending 500 thousand dollars on an AIM 9L, i guess ill have to make one" lol nice job
@archdornan4389
3 ай бұрын
Next step is adding this inertial nav to a model airplane. After that, TERCOM via optics
@aminecraftnerd1920
Жыл бұрын
My man out here making a guided missile.
@rickson50
Жыл бұрын
a missile by definition is guided
@patdowling5
Жыл бұрын
Fantastic work, 😊 from Ireland 🇮🇪
@jeisinga
6 ай бұрын
love the work you did on this rocket
@chefpatat
Жыл бұрын
Insane as per usual
@RGCbaseace
Жыл бұрын
Boss level activated well done
@skaterfabi11
11 ай бұрын
great project, what kind of sensor fusion algorithms did you use for the IMU?
@jameschen2308
8 ай бұрын
Damn, this guy is on a list now 😭
@Kawka1122
Жыл бұрын
I like how you guys can build this stuff. In Poland they would hunt down such engineer and prosecute him until he would "shit himself". Great work with sensor fusion algorithm.
@rickson50
Жыл бұрын
pretty sure any american who watches this would be put on a special government list too so, not too far off
@Adam4A4
Жыл бұрын
AGH robi rakiety głupi mośku.
@noahw4623
Жыл бұрын
@rickson50 Basically, the rule of thumb is to keep it vertical, also no targeting systems. You break those rules, well, that's a felony
@flow5718
Жыл бұрын
Join a rocketry club or create a KZitem channel? As long as you have a valid reason the powers that be seem content to leave people alone.
@SpiraSpiraSpira
Жыл бұрын
@@noahw4623t is actually perfectly legal to design and build guided rockets in America. We have the 2nd amendment, after all. If they have explosives attached, then it is a little more complicated but still possible. Testing them can become a lot more complicated as there are FAA (surprisingly not ATF) regulations that prevent guided rocket testing without special permission. Guided meaning that it lands in a specific location. It’s a lot easier to design, test and deploy autonomous loitering munitions that do not use rocket motors, like the switchblade drones and the like, these days if you are a budding Tony Stark.
@wulfleyn6498
Жыл бұрын
Chinese kids having more advanced guidance tech than russian military missiles is pretty funny. Edit: called them korean when they're chinese, bit of an oops.
@lshang882
Жыл бұрын
Hey Wulfleyn, appreciate your sense of humor! Just to clarify, the kids in the video are actually from China, not Korea. While their technology might not be on par with military-grade missiles, it's still fascinating to see how far technology has come and how it's accessible to people of all ages. Cheers! 😊
@wulfleyn6498
Жыл бұрын
@@lshang882 Oh sorry, still cool though, I have problems with distinguishing languages in general so sorry for that.
@raydeemed
9 күн бұрын
@@wulfleyn6498 can these kids make hypersonic ones ??? Russia has 1 u.s has 0 maybe you need to open your eyes to reality
@acolyteaxiom4054
Жыл бұрын
Very cool! Great job 👏
@silentblackhole
11 ай бұрын
Thank you for making this compact. I would have been about to view your skilful work otherwise. Well done on the rocket!
@AhmedAdly11
Жыл бұрын
Each time I see young people create I feel hope for the world.
@gybob100
8 ай бұрын
You better understand what you wish for in the context of geopolitical paradigm
@AhmedAdly11
8 ай бұрын
@@gybob100 it is shifting
@ericon.7015
Жыл бұрын
Amazing quality!
@skauffman74
10 ай бұрын
Just when I thought I was an "engineer"; all those young man are TRUE engineers. Probably in a thousand years I will be able to scratch 2% of what they already know... Such a charming thought, isn't it?
@TeoMaragakis
3 ай бұрын
If you were not in a list before, you are now. If I ever become half as good an engineer as you are, I’ll die a happy man.
@92kosta
7 ай бұрын
_Hamas joined the chat._
@dzgaming5785
6 ай бұрын
Nik lyhoud hhhh
@SouthSaharaMedia
11 ай бұрын
some countries cant pull this off .... but these kids did .
@habeebabdulfatah4847
7 ай бұрын
Guys this is so cool. Great job!! I would love to build too.
@EriccoInertialsystem
10 ай бұрын
so amazing ,you did a good job,and give us a fantastic appreciation !!and i have a question, u did the whole by yourself????so amazing
@skyguyfpv2399
Жыл бұрын
Damn, western kids are learning how to twirk and here the Chinese are learning rocket science
@tld8102
Жыл бұрын
that’s amazing!
@malickwb3505
8 ай бұрын
Hey shang it Malick thanks for this little extract,so what are the engineering software did you use?
@fpvlive3346
8 ай бұрын
Does this system use Kalman filter and dead reckoning for position estimation?
@ddegn
Жыл бұрын
Why do the fins "eject" at 1:16? Great video! Thanks for sharing your work with us.
@bb-bricks3040
Жыл бұрын
Pretty sure so that the rocket flies straight down before recovery parachutes deploy
@ddegn
Жыл бұрын
@@bb-bricks3040 I think you are correct. I don't understand why they want the rocket traveling straight down. It sure seems like it would be hard to find those fins again. There's probably a good reason for doing it this way, I just don't understand it.
@bb-bricks3040
Жыл бұрын
@@ddegn if you can see those fins on the back help control the rocket and the top (or front) part is chamfered for aerodynamics. Because of their 90 degree trapezoidal design as well as the positioning (you don't want control fins on the front of your rocket), they would negatively affect its aerodynamics.
@ddegn
Жыл бұрын
@@bb-bricks3040 I can see how ejecting the fins improve aerodynamics, I just think it's an interesting choice to discard the fins. I wonder if the fins are considered disposable. It sure seems like it would be hard to find the fins after each launch. Of course with 3D printing those fins could be replace with very little effort and very little cost. My wondering about the fins shouldn't be taken as criticism of the rocket design. I think the rocket is amazing.
@lshang882
Жыл бұрын
Because I want the Rocket to maintain the upward attitude in order to control the trajectory of the decline process, and I will try to use a reverse engine to land in the future.
@Lukas-dn6wd
Жыл бұрын
Engineers 1 second after they graduate (they love the military industrial complex)
@everry3357
6 ай бұрын
Tbf most cutting edge is in that sector
@aaronmarkstaller
Жыл бұрын
Nice. What program for telemetry and data do you use?
@Hydro2Mech
3 ай бұрын
That was awesome. Gread job. That was very satisfying to watch :)
@anditoyib_28
Жыл бұрын
similar to a ballistic missile but a mini version
@kfwj001
Жыл бұрын
下次加个遥控 再让它飞回来。省得去捡它😊😊😊
@mostfunnestchannel
9 ай бұрын
How can you just walk around with it at the park without making rocket noises and pretending it is flying???? That was some impressive self control, I would definitely be like "FSHHHHHHHHHHHHHFSHHHHFSHHHH!!!" every time I carried it around. Amazing project I am really impressed! Also if you do ever need someone to follow the rocket around wherever it goes making rocket noises, I am your man.
@ignacios3992
10 ай бұрын
unbelievable, if i would know how to do a guided missile, i would´nt feel safe; but it´s impressive how all you, with things that "anybody can get", have developed that tecnology. congratulations!
@History-Remastered
Жыл бұрын
Ever considered to making this whole project open source? i would like to help with the design but also perhaps scaling it up.
@lorenzcyber
Жыл бұрын
i mean id like that too but tbh i feel like such systems most likely fall under multiple countries regulations of weapon systems just like passive radar code and so son with the kraken SDR not sure if Japan has such regulations not to mention the huge amount of risk this would add for terror attacks and other things like assassinations which in japan are pretty on topic rn so i think the release of the code would be more unlikely, although this may be sweet to send the FSB a present from some activists in Russia this would be hecking sick for causing chaos inland russia
@lorenzcyber
Жыл бұрын
kzitem.info/news/bejne/xG9qyHWCepl2gYI but maybe this would help ya to some extend
@danielevendrame9350
Жыл бұрын
I believe this was developed within a University institution and I don't think China has any interests in making such projects open source.
@ryanchowdhary965
Жыл бұрын
@@danielevendrame9350 Hong kong
@joshuaeah
Жыл бұрын
It would get beaten the shit up by ITAR
@Andrecio64
Жыл бұрын
The missile knows where it is at all times. It knows this because it knows where it isn't, by subtracting where it is, from where it isn't, or where it isn't, from where it is, whichever is greater, it obtains a difference, or deviation. The guidance sub-system uses deviations to generate corrective commands to drive the missile from a position where it is, to a position where it isn't, and arriving at a position where it wasn't, it now is. Consequently, the position where it is, is now the position that it wasn't, and it follows that the position where it was, is now the position that it isn't. In the event of the position that it is in is not the position that it wasn't, the system has required a variation. The variation being the difference between where the missile is, and where it wasn't. If variation is considered to be a significant factor, it too, may be corrected by the GEA. However, the missile must also know where it was. The missile guidance computance scenario works as follows: Because a variation has modified some of the information the missile has obtained, it is not sure just where it is, however it is sure where it isn't, within reason, and it knows where it was. It now subracts where it should be, from where it wasn't, or vice versa. By differentiating this from the algebraic sum og where it shouldn't be, and where it was. It is able to obtain a deviation, and a variation, which is called "air"
@joaoborges4752
8 ай бұрын
What software is used for Inertial Navigation Test?
@JLEXArus
3 ай бұрын
Хорошая работа Олег!
@aerojetrocketdyners-2538
Жыл бұрын
Homemade HIMARS hahaha
@cobrascolar
Жыл бұрын
Crazy, now add radar and object tracking😶🌫
@youreale
Жыл бұрын
hahahah the guys is not on missile business..
@JavierAlbinarrate
Жыл бұрын
Hamas doesn't even need that...
@mrsaizo0000
Жыл бұрын
The onboard camera part was very nice!
@michaelvernon9459
Жыл бұрын
Very impressive! Good job
@NileGold
Жыл бұрын
The US goverment wants to know your location
@EucaBear
Жыл бұрын
Chinese students: "We developed a missile flight trajectory control system while still at university." U.S. students: "There are 47 genders."
@NextFuckingLevel
Жыл бұрын
You kidding?? Those 47 genders could be weaponized as "freedom" bullet
@mattmurphy7030
4 ай бұрын
Unbelievable work, great job!!
@eham2011
8 ай бұрын
hello great stability and control can you kindly share which gyro did you use ?
@writerrhino166
9 ай бұрын
As somebody who's in "the business" for real, I'm very impressed.
@TiLaDn
4 күн бұрын
Is it better for the fins on the top to be aligned with the ones on the bottom or would it be better offset
@masboyrc
Жыл бұрын
Wow.. impressive 👌
@stokesseegers5012
Жыл бұрын
I want to see FPV RC fighter jet races, on a Death Star Trench Run style race track!
@amphem
10 ай бұрын
fantastic work :D I want to be able to build something like this
@sKonkofov
Жыл бұрын
very cool job. which cad was used?
@2fathomsdeeper
8 ай бұрын
Did a laser guided model rocket back in the 80's with nowhere near the tech used here. Photodiodes and 741 op amps for the most part. Tube launched and two staged. Could hit within 4 feet of the aim point at 500 yards.
@area-xw9yb
7 ай бұрын
yes
@zesetai21
3 ай бұрын
I'd love to hear more about this one...
@RealMineplayz
Жыл бұрын
are those parts 3d printed or is it like metal cut parts?
@beanieteamie7435
5 ай бұрын
Wow! Absolutely incredible work.
@burner8126
2 ай бұрын
WOW! Nice skills dude. Awesome work.
@senaajitraghu
Жыл бұрын
Amazing work dude!!
@yelectric1893
Жыл бұрын
Beyond outstanding.
@angrycolonel1957
Жыл бұрын
imagine having an education system so fucking good that your under grad student are capable of manufacturing gbs guided weapons
Пікірлер: 1 М.