This video took some time to film as I was learning how to setup and use the crane at the same time as filmimg it.
The small white loco the crane lifts is a special model from 1997 Which I converted to Dcc.
The loco weight is 134 grams
I turned down the sound on the model as its way too loud out of the box.
Controlled with a ps4 controller paired with a tablet via the Z21 app, the Z21 command station was connected to the Esu Ecos via the sniffer port so both the Z21 and the Ecos can control the crane.
Note: The jib hook must be aligned with the counter weight before auto docking the jib.
The model crane can lift 300g in short boom mode with out riggers, 130g in fully extended boom mode with out riggers and between 240g and 80g with no out riggers with a 15 degree turn only from the docked position.
Functions:
■ Self-driving model
■ Freewheel function in the train is possible
■ The crane's superstructure with its boom can be rotated 360°.
■ The crane boom can be raised or lowered.
■ The telescopic boom can be extracted and retracted.
■ The crane hooks can be raised or lowered with a multi stage pulley.
■ The headlamps of the crane's superstructure and the work lamp on the telescopic boom are switchable.
■ Model with onboard digital decoder and switchable light and sound functions
■ Movable outriggers
■ Barrier wagon with bearing block, counterweight and support pedestals
■ Control by Z21 multiMAUS or Z21 ᴡʟᴀɴMAUS
■ Specially adapted crane control in the Z21 app
■ Control by PS4 controller
Негізгі бет ROCO DIGITAL CRANE SOUND Slewing railway crane {DB} vid 2
No video
Пікірлер: 54